1. Introduction
Thank you for choosing the Brightever Solar Outdoor Motion Sensor Security Lights. This manual provides essential information for the safe and efficient operation of your new solar lights. Please read these instructions carefully before installation and use, and retain them for future reference.
These solar-powered lights are designed for outdoor use, featuring 388 LED beads for bright, wide-angle illumination, a motion sensor, and three distinct lighting modes. Their waterproof and durable construction ensures reliable performance in various weather conditions.
2. Safety Information
- Ensure the solar panel receives direct sunlight for optimal charging. Avoid shaded areas.
- Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.
- Keep the product away from fire or extreme heat sources.
- Do not immerse the product in water, despite its waterproof rating. The IP65 rating protects against jets of water and dust, not submersion.
- Install the lights securely to prevent them from falling.
- Dispose of batteries according to local regulations.
3. Package Contents
Verify that all components are present in your package:
- Brightever Solar Outdoor Motion Sensor Security Lights (4 units)
- Mounting Hardware (screws and wall plugs)
- User Manual (this document)
4. Product Features
- High-Efficiency Solar Panel: Utilizes monocrystalline silicon solar cells with up to 20.5% conversion rate for efficient charging.
- Super Bright Illumination: Each light features 388 LED beads, providing 270° wide-angle lighting.
- Advanced Motion Sensor: Built-in PIR motion sensor with a 120-degree detection angle and a 16-foot range.
- Three Lighting Modes: Adaptable lighting options for various security and ambient needs.
- Durable & Weatherproof: Constructed from upgraded ABS material, IP65 waterproof, heat-resistant, and frost-resistant.
- Energy Saving: Solar-powered operation eliminates electricity costs and reduces environmental impact.
- Easy Installation: No wiring required; simple screw-mounting for quick setup.
Image 1: Four Brightever Solar Outdoor Motion Sensor Security Lights. Each light features a solar panel on top, a motion sensor in the center, and multiple LED lights below.
Image 2: Diagram illustrating the solar charging process during the day (6-8 hours) and automatic illumination at night for 15 seconds when motion is detected. The image shows a light mounted on a house at night.
5. Specifications
| Feature | Detail |
|---|---|
| Brand | Brightever |
| Model Name | HSG-T22LB-A-4PK |
| Light Source Type | LED (388 beads per light) |
| Brightness | 600LM (per light, as per product description); 4000 Lumen (as per product specifications) |
| Color Temperature | 6500K (as per product description); 6000 Kelvin (as per product specifications) |
| Motion Sensor Angle | 120 degrees |
| Motion Sensor Range | 16 feet |
| Lighting Angle | 270 degrees |
| Waterproof Rating | IP65 |
| Housing Material | ABS+PC |
| Power Source | Solar Powered |
| Battery | 1 Lithium Ion battery (included) |
| Charging Time | 6-8 hours in direct sunlight |
| Illumination Time | Up to 8-10 hours (after full charge) |
| Product Dimensions | 8.66"L x 2.6"W x 3.8"H |
| Item Weight | 2.83 pounds (total for 4-pack) |
Image 3: Detailed view of the product, highlighting its dimensions (8.66in L x 2.6in W x 3.8in H) and key components: Mode Button, Ultra-Bright LED array, Sensitive Motion Sensor, and High Efficiency Solar Panel.
6. Setup and Installation
The Brightever Solar Lights are designed for easy, wire-free installation. Follow these steps for optimal performance:
- Choose a Location: Select an outdoor location where the solar panel can receive 6-8 hours of direct sunlight daily. Avoid areas under eaves, trees, or other obstructions that might shade the panel.
- Initial Charge: Before first use, it is recommended to allow the lights to charge in direct sunlight for at least 6-8 hours with the power button pressed (usually the default ON state).
- Mark Drilling Points: Hold the light in the desired mounting position and mark the locations for the screws.
- Drill Holes: Use an appropriate drill bit to drill holes at the marked points.
- Insert Wall Plugs: If installing on masonry or concrete, insert the provided wall plugs into the drilled holes.
- Mount the Light: Align the light with the holes and secure it using the provided screws. Ensure it is firmly attached.
These lights are suitable for various outdoor applications, including walls, gardens, fences, yards, patios, garages, driveways, porches, and gutters.
Image 4: Collage showing the solar lights installed in different outdoor environments: on a fence, along a building wall near stairs, above a garage door, and on a deck next to a house.
7. Operating Instructions
The lights feature a mode button, typically located on the front or bottom of the unit, to cycle through three distinct lighting modes. Press the button to switch between modes.
- Stay-on Mode (Mode 1):
- The light automatically turns on at 50% brightness at dusk and remains on throughout the night.
- It automatically turns off at dawn.
- No motion detection in this mode.
- Dim Light Sensor Mode (Mode 2):
- The light stays at a low brightness (approximately 30%) when no motion is detected at night.
- When motion is detected, it switches to full brightness (100%) for 15 seconds.
- After 15 seconds without motion, it returns to dim brightness.
- Strong Light Sensing Mode (Mode 3):
- The light remains off when no motion is detected at night.
- When motion is detected, it turns on at full brightness (100%) for 15 seconds.
- After 15 seconds without motion, it turns off completely.
Image 5: Visual representation of the three lighting modes: Mode 1 (Always on at 50% light), Mode 2 (Dim light, then 100% for 15s upon motion), and Mode 3 (Off, then 100% for 15s upon motion).
8. Maintenance
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum charging efficiency.
- Clear Obstructions: Periodically check that no new obstructions (e.g., growing branches, new installations) are shading the solar panel.
- Battery Care: The integrated Lithium Ion battery is designed for long life. If the light's performance significantly degrades over time, ensure the panel is clean and receiving adequate sunlight. Battery replacement is not typically user-serviceable.
- General Cleaning: Clean the light fixture itself with a damp cloth as needed to maintain its appearance.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel is in direct sunlight for 6-8 hours daily. Clean the solar panel. |
| Light stays dim or turns off too quickly. | Battery not fully charged or degraded. | Relocate the light to an area with more direct sunlight. Ensure the solar panel is clean. |
| Motion sensor not detecting movement. | Sensor obstructed or incorrect mode. | Ensure the sensor is clear of obstructions. Check that the light is in Mode 2 or Mode 3. |
| Light is not as bright as expected. | Low battery charge or dirty LED cover. | Allow for a full day's charge. Clean the LED protective screen. |
Image 6: Comparison chart highlighting features of Brightever lights (270° Lighting Angle, 120° Motion Sensor Angle, 388 LED Chip Quantity, 16FT Detection Distance, IP65 Waterproof, With Reflector) against generic "Others" (90° Lighting Angle, 60° Motion Sensor Angle, 120pcs LED Chip Quantity, 10FT Detection Distance, Not Waterproof, Without Reflector).
Image 7: Illustration of the solar light's premium material and all-weather resistance, showing it functioning during rain, with icons for IP65 Waterproof, Heat-resistant, and Frost-resistant.
10. Warranty and Support
Brightever stands behind its products. If you encounter any issues with your solar security lights within three months of purchase, please contact Brightever customer support via the message box on the platform where you purchased the product. We aim to respond and assist within 24 hours.
For additional support or inquiries, please refer to the Brightever brand store or contact their customer service directly.
