1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Y-METDRIVING TH0030 7-Inch Single DIN Motorized Flip-Out Touchscreen Car Stereo. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.
Image 1.1: Overview of the Y-METDRIVING TH0030 car stereo and included accessories.
2. Package Contents
Verify that all items listed below are included in your package:
- Y-METDRIVING TH0030 Car Stereo Unit
- Remote Control
- Backup Camera
- Microphone
- Wiring Harness
- Connect Cable
- User Manual
- Disassembly Tool
- Backup Camera Cable
- Camera Power Cable
Image 2.1: Visual representation of the package contents.
3. Safety Information
To prevent injury or damage to the unit, observe the following precautions:
- Do not operate the unit in a manner that distracts you from driving. Always prioritize road safety.
- Ensure proper wiring connections to avoid short circuits or electrical hazards. Consult a professional if unsure.
- Do not disassemble or modify the unit. This may cause damage and void the warranty.
- Keep the unit away from water and excessive moisture.
- Use only specified voltage for power supply.
4. Installation
The Y-METDRIVING TH0030 is a single DIN car stereo. Before installation, measure your dashboard opening to confirm compatibility. Professional installation is recommended.
4.1 Compatibility Check
This unit is designed for single DIN openings, typically 178mm (W) x 50mm (H). If your car's console part requires a different size, an additional mounting kit specific to your car model may be necessary for a tight fit.
4.2 Wiring Connections
Refer to the included wiring harness diagram for correct connections. Key connections typically include:
- Power: Constant 12V (Yellow), Accessory 12V (Red), Ground (Black).
- Speakers: Connect to your vehicle's speaker wires (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
- Backup Camera: Connect the camera's video output to the unit's 'CAM IN' input and the camera's power to the reverse light circuit.
- Antenna: Connect your car's radio antenna.
- USB/AUX: Connect external devices as needed.
5. Initial Setup
5.1 Power On/Off
Press the POWER button on the front panel to turn the unit on or off.
5.2 Screen Adjustment
The motorized flip-out screen can be adjusted for optimal viewing. Use the ANGLE+ and ANGLE- buttons on the front panel to change the screen's tilt angle (60° to 100°).
Image 5.1: Motorized screen adjustment and available input ports.
6. Operating Instructions
6.1 Apple CarPlay & Android Auto (Wired)
Connect your smartphone to the car stereo via a USB cable to access Apple CarPlay or Android Auto. This allows for navigation, phone calls, messages, music, and voice assistant functions directly on the stereo's screen.
- Connect your iPhone or Android phone to the unit's USB port.
- The system will automatically detect and launch CarPlay or Android Auto.
- Use the touchscreen or voice commands (Siri for CarPlay, Google Assistant for Android Auto) for control.
Image 6.1: Wired Apple CarPlay and Android Auto connectivity.
6.2 Bluetooth Hands-free & Audio Streaming
The unit features built-in Bluetooth 5.0 for wireless connectivity.
- Pairing: Enable Bluetooth on your smartphone and search for available devices. Select 'CAR-BT' (or similar name) from the list and confirm pairing.
- Hands-free Calling: Once paired, you can make and receive calls directly through the car stereo, using the built-in microphone.
- Audio Streaming: Play music from your smartphone wirelessly via Bluetooth.
Image 6.2: Bluetooth hands-free calling interface.
6.3 FM Radio
Access the FM radio function to listen to your favorite stations.
- Station Search: The unit supports full-automatic, semi-automatic, and accurate adjustment ways to search for channels.
- Preset Stations: Store up to 18 of your preferred FM stations for quick access.
Image 6.3: FM Radio interface and DSP settings.
6.4 Mirror Link Function
Mirror Link allows you to display your smartphone's screen content (video, music, GPS navigation) directly on the car stereo's display via a USB cable connection for both Android phones and iPhones.
- Connect your smartphone to the unit's USB port.
- Follow the on-screen prompts or phone instructions to activate Mirror Link.
Image 6.4: Mirror Link displaying smartphone content.
6.5 Rear View Camera
When properly installed, the included backup camera provides a clear view of the area behind your vehicle when reversing.
- The camera offers good night vision and a wider view angle.
- It is designed to be waterproof for reliable performance in various weather conditions.
- The display automatically switches to the camera view when the vehicle is in reverse gear.
Image 6.5: Rear view camera display and steering wheel control.
6.6 DSP Processing & EQ Settings
The unit features built-in DSP (Digital Signal Processing) chips and a 16-band equalizer to customize your audio experience.
- Access the EQ settings through the menu to adjust frequency bands.
- The 4*45W amplifier provides enhanced sound quality.
- Users can save their preferred sound profiles.
6.7 USB/TF/AUX Playback
The unit supports various media inputs for audio and video playback.
- USB Port: Connect USB drives for media playback or smartphone charging.
- TF Card Slot: Insert a TF (MicroSD) card with media files.
- AUX Input: Connect external audio/video devices using a 3.5mm auxiliary cable.
6.8 Steering Wheel Control
If your vehicle supports steering wheel controls, you can configure them to operate the car stereo, allowing for safer control of functions like volume, track changes, and call management without taking your hands off the wheel.
Image 6.6: Steering wheel control functionality.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your car stereo.
- Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. Avoid abrasive cleaners or harsh chemicals.
- General Cleaning: Keep the unit free from dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
- Avoid Extreme Temperatures: Do not expose the unit to prolonged direct sunlight or extreme cold, as this can affect performance and lifespan.
8. Troubleshooting
If you encounter issues with your Y-METDRIVING TH0030, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect wiring; Blown fuse; Vehicle battery issue. | Check power connections (Yellow, Red, Black wires). Inspect vehicle fuses. Ensure battery is charged. |
| No sound | Incorrect speaker wiring; Volume too low; Mute function active. | Verify speaker connections. Increase volume. Check if mute is enabled. |
| Bluetooth not connecting | Bluetooth not enabled on phone/unit; Incorrect pairing. | Ensure Bluetooth is active on both devices. Delete previous pairings and re-pair. |
| CarPlay/Android Auto not starting | Faulty USB cable; Phone not compatible; App not installed. | Use a high-quality USB cable. Ensure your phone and apps are updated. |
| Screen not flipping out/in | Obstruction; Motor malfunction. | Check for any physical obstructions. If issue persists, contact support. |
For issues not covered here, please refer to the contact information in the support section.
9. Specifications
Detailed technical specifications for the Y-METDRIVING TH0030 car stereo:
- Brand: Y-METDRIVING
- Model Number: TH0030
- Product Dimensions: 2.28 x 6.06 x 7.4 inches
- Item Weight: 4 pounds
- Screen Size: 7 inches (18 cm visible diagonal)
- Screen Resolution: 1024*600 HD
- Display Type: QLED Capacitive Touch Screen
- Connectivity Technology: Auxiliary, Bluetooth 5.0, USB
- Controller Type: Hand Control, Voice Control
- Special Features: Android Auto, Apple CarPlay, Built-In Bluetooth, Motorized Flip Out Screen, Mirror Link
- Compatible Devices: Smartphone
- Connector Type: RCA
- Audio Output Mode: Stereo
- Surround Sound Channel Configuration: 4.0
- Video Encoding: AVI
- Color: BLACK
- Manufacturer: shenzhen tonghang technology co,. ltd
- First Available Date: September 13, 2023
Image 9.1: Product dimensions.
10. Warranty and Support
Y-METDRIVING is committed to product quality. If you encounter any problems during purchase or use, please contact our customer service team. We are available to provide assistance and timely suggestions.
Please refer to your purchase documentation for specific warranty terms and contact details.