Drsaec i52

Drsaec i52 Wireless Earbuds User Manual

Model: i52 | Brand: Drsaec

Introduction

Thank you for choosing the Drsaec i52 Wireless Earbuds. These earbuds are designed to provide a superior audio experience with advanced features such as Bluetooth 5.4 connectivity, HiFi stereo sound, extended battery life, and IP7 waterproofing. This manual will guide you through the setup, operation, and maintenance of your new earbuds to ensure optimal performance and longevity.

Drsaec i52 Wireless Earbuds in charging case with LED display showing 100% charge

Image: Drsaec i52 Wireless Earbuds in their charging case, displaying the battery level on the LED screen.

Package Contents

  • 2 x Drsaec i52 Bluetooth Earbuds (Left and Right)
  • 1 x Charging Case
  • 1 x USB-C Charging Cable
  • 1 x User Manual

Setup

Initial Charging

Before first use, fully charge the earbuds and the charging case. Connect the provided USB-C cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port). The LED display on the case will show the charging progress. A full charge takes approximately 1 hour.

Drsaec i52 Earbuds charging case with USB-C cable connected, showing LED power display

Image: The Drsaec i52 charging case connected via USB-C, illustrating the digital power display for both the case and individual earbuds.

Pairing with Your Device

  1. Ensure your device's Bluetooth is turned on.
  2. Open the charging case. The earbuds will automatically power on and enter pairing mode.
  3. On your device, search for Bluetooth devices and select "i52" from the list.
  4. Once connected, a voice prompt will confirm successful pairing.

The earbuds will automatically reconnect to the last paired device when removed from the case, provided Bluetooth is enabled on the device.

Drsaec i52 Earbuds showing one-step pairing process with a smartphone

Image: Illustration of the one-step pairing process for the Drsaec i52 earbuds, showing automatic connection upon opening the case and disconnection upon closing.

Operating Instructions

Touch Controls

The Drsaec i52 earbuds feature intuitive touch controls on each earbud. Refer to the table below for common functions:

ActionLeft Earbud (L)Right Earbud (R)
Play/PauseDouble TapDouble Tap
Next SongTriple TapTriple Tap
Previous SongLong Press (2s)Long Press (2s)
Volume UpSingle TapN/A
Volume DownN/ASingle Tap
Answer/End CallSingle TapSingle Tap
Reject CallLong Press (2s)Long Press (2s)
Activate Voice AssistantQuadruple TapQuadruple Tap
Drsaec i52 Earbuds touch control diagram

Image: Detailed diagram illustrating the smart touch controls on the Drsaec i52 earbuds for various functions like play/pause, volume, call management, and voice assistant activation.

Wearing the Earbuds

Gently insert the earbuds into your ear canal and rotate them slightly to find a comfortable and secure fit. The ergonomic design ensures stability during various activities.

Person wearing Drsaec i52 Earbud comfortably

Image: A person wearing a Drsaec i52 earbud, demonstrating the comfortable and secure fit of the ergonomic design.

Maintenance

Cleaning

Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners or immerse the earbuds or case in water.

Storage

When not in use, store the earbuds in their charging case to protect them and keep them charged. Store the case in a cool, dry place away from direct sunlight and extreme temperatures.

Water Resistance (IP7)

The Drsaec i52 earbuds are IP7 waterproof, meaning they can withstand sweat and rain. However, they are not designed for swimming or showering. Ensure the earbuds are dry before placing them back into the charging case to prevent damage.

Drsaec i52 Earbuds with IPX7 waterproof rating icon

Image: The Drsaec i52 earbuds highlighting their IP7 waterproof rating, indicating resistance to sweat and rain.

Troubleshooting

ProblemPossible Solution
Earbuds not pairing/connecting
  • Ensure earbuds are charged.
  • Turn off and on Bluetooth on your device.
  • Forget "i52" from your device's Bluetooth list and re-pair.
  • Place earbuds back in the case, close, wait a few seconds, then open again.
Only one earbud working
  • Ensure both earbuds are charged.
  • Place both earbuds back in the case, close, then open again to reset their connection.
  • Try re-pairing the earbuds with your device.
Low volume or poor sound quality
  • Adjust volume on both your device and the earbuds.
  • Ensure earbuds are clean and free of debris.
  • Check for a secure fit in your ear.
  • Move closer to your connected device to avoid interference.
Charging case not charging
  • Check the USB-C cable and power adapter.
  • Ensure the charging port is clean.
  • Try a different charging cable or power source.

Specifications

FeatureDetail
Modeli52
Bluetooth Version5.4
Wireless RangeUp to 15 meters
Playtime (Single Charge)8 hours
Total Playtime (with Charging Case)Up to 50 hours
Charging Time (Earbuds & Case)Approx. 1 hour
Charging PortUSB-C
Waterproof RatingIP7
Microphones4 HD Mics with ENC Noise Cancellation
Driver Size13mm Dynamic Driver
Frequency Response20 Hz - 20,000 Hz
Earbud Weight3 grams (each)
Compatible DevicesiOS, Android, PC, MAC (Bluetooth-enabled devices)
Drsaec i52 Earbuds highlighting Bluetooth 5.4 chip features

Image: Visual representation of the advanced Bluetooth 5.4 chip in the Drsaec i52 earbuds, emphasizing faster transmission speed, lossless transmission, and lower power consumption.

Drsaec i52 Earbuds HiFi superior sound components

Image: An exploded view illustrating the components contributing to the HiFi superior sound of the Drsaec i52 earbuds, including the 13mm dynamic driver.

Drsaec i52 Earbuds with 50H playtime and LED display

Image: The Drsaec i52 earbuds and charging case, highlighting the 50-hour total playtime and the dual LED display for battery status.

Drsaec i52 Earbuds with IP7 waterproof rating

Image: Close-up of the Drsaec i52 earbuds, emphasizing their IP7 waterproof rating for protection against sweat and rain.

Drsaec i52 Earbuds one-step pairing and smart touch control

Image: A composite image showing the one-step pairing process and the smart touch control interface for the Drsaec i52 earbuds.

Drsaec i52 Earbuds with touch control icons

Image: Icons representing the various touch control functions available on the Drsaec i52 earbuds, such as play/pause, volume, and call management.

Warranty and Support

Drsaec products come with a standard manufacturer's warranty. For specific warranty details and duration, please refer to the warranty card included in your package or contact Drsaec customer support.

Customer Support

If you encounter any issues or have questions regarding your Drsaec i52 Wireless Earbuds, please contact our customer support team. We are committed to providing efficient and timely assistance.

For support, please visit the official Drsaec website or contact us via the details provided on the product packaging or purchase platform.

Drsaec customer support icon

Image: An icon representing Drsaec's customer support, symbolizing assistance for any queries or problems.

© 2024 Drsaec. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.