Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter with DMW-DCC17 Type-C Dummy Battery User Manual

1. Introduction

This manual provides instructions for the safe and effective use of the Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter, specifically the variant including a DMW-DCC17 Type-C Dummy Battery. This device is designed to provide continuous power to various camera accessories and cameras from a single V-mount battery via D-Tap, enhancing portability and power management for photographic and videographic activities.

2. Product Overview

The Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter (Model WY-F550X2) is a versatile power solution. It features a dual-sided NP-F dummy battery design, a D-Tap input, and a Type-C output with Power Delivery (PD) functionality. This specific package includes a DMW-DCC17 Type-C Dummy Battery for compatible cameras.

2.1 Components

• D-Tap to Dual-Sided NP-F Dummy Battery Adapter (Model WY-F550X2)
• Coiled D-Tap Cable
• Type-C to DMW-DCC17 Dummy Battery

2.2 Key Features

• Dual-Sided NP-F Dummy Battery: Powers devices compatible with NP-F batteries, such as monitors, wireless receivers, LED video lights, and microphones.
• D-Tap Input: Connects to a V-mount battery for primary power supply.
• Type-C Output with PD: Provides power to an additional device, supporting 5V, 9V, or 12V output up to 36W.
• Integrated Protection Circuits: Built-in input/output reverse, high voltage, and overload protection for safe operation.
• Included DMW-DCC17 Dummy Battery: Allows compatible cameras to be powered directly from the adapter.

Figure 1: Overview of the Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter kit. This image shows the main NP-F adapter, the coiled D-Tap cable, and the DMW-DCC17 Type-C dummy battery.

Figure 2: The D-Tap to NP-F adapter, coiled cable, and DMW-DCC17 dummy battery laid out. This image highlights the individual components of the power solution.

3. Setup and Connection

Follow these steps to set up your Andoer D-Tap to Dual-Sided NP-F Dummy Battery Power Adapter:

1. Connect to Power Source: Insert the D-Tap connector of the coiled cable into a compatible D-Tap output port on a V-mount battery or power distribution plate. Ensure a secure connection.
2. Connect to NP-F Devices: Insert the dual-sided NP-F dummy battery adapter into the NP-F battery slot of your monitor, wireless receiver, LED video light, or microphone. The adapter can power two NP-F compatible devices simultaneously.
3. Connect to Camera (DMW-DCC17):
   • Connect the Type-C end of the DMW-DCC17 dummy battery cable to the Type-C output port on the NP-F adapter.
   • Insert the DMW-DCC17 dummy battery into the battery compartment of your compatible camera.
   • Close the camera's battery door, ensuring the cable passes through any designated cable exit.
4. Connect Additional Type-C Device (Optional): If needed, connect another Type-C powered device (e.g., a smartphone for charging) to the remaining Type-C output port on the NP-F adapter.

Important: Ensure all connections are firm before powering on any devices. Always connect the D-Tap cable to the power source last, and disconnect it first when powering down.

Figure 3: The D-Tap to NP-F adapter connected to a wireless receiver, demonstrating its use in a typical setup. The coiled cable provides flexibility.

Figure 4: Close-up view of the D-Tap to NP-F adapter showing the Type-C output port. This port can be used to power a camera via a Type-C dummy battery or other Type-C devices.

Figure 5: The flexible coiled D-Tap cable, which can extend up to 60cm, providing versatility in rigging.

4. Operating Instructions

Once all connections are made as described in the Setup section:

1. Power On: Turn on your V-mount battery or power source. The connected devices (monitor, wireless receiver, camera, etc.) should receive power.
2. Monitor Power Status: Observe the power indicators on your connected devices to confirm they are receiving power correctly.
3. Type-C Power Delivery: The Type-C output port supports Power Delivery (PD) and will automatically negotiate the appropriate voltage (5V, 9V, or 12V) with the connected device, up to 36W.
4. Power Off: To power down, first turn off all connected devices, then disconnect the D-Tap cable from the V-mount battery. Finally, disconnect the dummy batteries from your devices.

Note: Do not power the camera directly from the D-Tap input if the input voltage is 9V. In such cases, the NP-F output will be 7.8V, which is normal, but the Type-C output will only be 5V. Ensure your camera's power requirements are met by the Type-C output when using the DMW-DCC17 dummy battery.

5. Specifications

Figure 6: Detailed diagram illustrating the components and specifications of the Andoer D-Tap to NP-F adapter, including input/output ports and dimensions.

6. Maintenance and Care

• Keep the adapter and cables clean and dry. Avoid exposure to moisture or extreme temperatures.
• Do not attempt to disassemble or modify the device. This may void the warranty and cause damage.
• Store the device in a cool, dry place when not in use.
• Regularly inspect cables for any signs of wear or damage. Replace damaged cables immediately.

7. Troubleshooting

8. Warranty and Support

Andoer products are designed for reliability and performance. For warranty information and technical support, please refer to the official Andoer website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may visit the Andoer Store on Amazon.