1. Introduction
Thank you for choosing the Demeyere 391371 Wardrobe. This modern and functional wardrobe is designed to provide ample storage with its four doors, five shelves, and two drawers, complemented by integrated mirrors. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and long-lasting use of your product.
Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
Important: Failure to follow these safety instructions could result in injury or damage to the product.
- Always assemble the wardrobe on a soft, clean surface to prevent scratches.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
- This wardrobe must be securely anchored to a wall using the provided anti-tip hardware to prevent tipping, which can cause serious injury or death.
- Do not allow children to climb on or play with the wardrobe.
- Distribute weight evenly within the wardrobe. Do not overload shelves or drawers.
- Keep small parts out of reach of children during assembly.
- Use only the specified tools and hardware for assembly.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Demeyere customer support.
Expected components include:
- Wardrobe panels (side panels, back panels, top, bottom, shelves)
- Doors (4 units, including 2 mirrored doors)
- Drawers (2 units, including drawer fronts, sides, backs, bottoms)
- Hardware pack (screws, dowels, cam locks, hinges, drawer slides, handles, anti-tip kit)
- Assembly instructions (this manual)
4. Setup and Assembly
Assembly typically requires two adults. Please follow the steps below carefully.
4.1 Unpacking and Preparation
- Clear a spacious area for assembly.
- Lay out all components on a soft, clean surface (e.g., a blanket or cardboard) to prevent scratches.
- Identify all parts and hardware using the provided parts list (if included in the physical package).
4.2 Assembling the Main Frame
Begin by connecting the base and side panels. Ensure all cam locks and dowels are properly aligned and secured.
Image 1: Front view of the assembled Demeyere 391371 wardrobe, showcasing its four doors and two drawers. This image provides an overall perspective of the product's appearance.
The wardrobe measures approximately 157.3 cm in width, 51.1 cm in depth, and 203 cm in height. Plan your space accordingly.
Image 2: Diagram illustrating the dimensions of the Demeyere 391371 wardrobe: 157.3 cm width, 51.1 cm depth, and 203 cm height. This helps in planning placement.
4.3 Installing Shelves and Hanging Rod
Insert the shelf supports into the pre-drilled holes at your desired height. Place the shelves firmly on the supports. Install the hanging rod in the designated section.
Image 3: Interior view of the Demeyere 391371 wardrobe with doors open, showing the hanging rod section on the left and multiple shelves and drawers on the right. This illustrates the internal storage configuration.
4.4 Assembling and Installing Drawers
- Assemble the drawer boxes by connecting the sides, front, and back panels. Slide the bottom panel into the grooves.
- Attach the drawer slides to the drawer boxes and the wardrobe frame according to the instructions.
- Carefully insert the assembled drawers into their respective compartments.
Image 4: Close-up view of an open drawer in the Demeyere 391371 wardrobe, highlighting the handle and the smooth operation of the drawer slides. This shows the drawer mechanism.
4.5 Attaching Doors and Mirrors
- Attach hinges to the doors and the wardrobe frame.
- Carefully lift and attach each door to the hinges. Adjust hinges as needed to ensure proper alignment and smooth closing.
- The mirrored doors are pre-installed with mirrors. Handle with care.
Image 5: The Demeyere 391371 wardrobe with all doors closed, showing the two plain white doors and the two mirrored doors, along with the two bottom drawers. This provides a complete view of the exterior.
4.6 Wall Anchoring (Anti-Tip Kit)
It is crucial to anchor the wardrobe to a wall to prevent tipping. Use the provided anti-tip kit and follow these steps:
- Position the wardrobe in its final desired location.
- Mark the wall through the mounting holes on the anti-tip brackets attached to the top rear of the wardrobe.
- Drill pilot holes into the wall at the marked locations. Use appropriate wall anchors for your wall type (e.g., drywall, concrete).
- Secure the brackets to the wall using screws.
- Attach the straps or cables from the wardrobe to the wall brackets, ensuring they are taut.
Warning: Failure to anchor the wardrobe can result in serious injury or death from tipping furniture.
5. Operating Instructions
5.1 Doors
- To open a door, gently pull the handle.
- To close, push the door firmly until it aligns with the frame. Avoid slamming doors to prevent damage to hinges and the wardrobe structure.
- The mirrored doors provide a full-length reflection for convenience.
5.2 Drawers
- To open a drawer, pull the handle outwards.
- To close, push the drawer inwards until it is fully seated.
- Do not overload drawers. The maximum weight capacity per drawer is approximately 5 kg.
5.3 Shelves
- The shelves are designed for storing folded clothes, accessories, or other lightweight items.
- Maximum weight capacity per shelf is approximately 16 kg.
- Ensure items are placed evenly on shelves to prevent imbalance.
5.4 Hanging Rod
- Use the hanging rod for garments that require hanging, such as shirts, dresses, or coats.
- Maximum weight capacity for the hanging rod is approximately 19 kg.
6. Maintenance
6.1 Cleaning
- Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- For mirrored surfaces, use a glass cleaner and a lint-free cloth.
- Dry all surfaces immediately after cleaning to prevent water damage.
6.2 General Care
- Periodically check all screws and fittings to ensure they remain tight. Re-tighten as necessary.
- Avoid exposing the wardrobe to direct sunlight or extreme temperature changes, which can cause warping or fading.
- Do not place hot items directly on the surface. Use coasters or protective pads.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not align or close properly. | Hinges are loose or misaligned. | Adjust the screws on the hinges to align the doors. Refer to hinge adjustment instructions (if provided with hardware). |
| Drawers stick or do not slide smoothly. | Drawer slides are misaligned or dirty; drawer is overloaded. | Check alignment of drawer slides. Clean slides with a damp cloth. Reduce weight in the drawer. |
| Wardrobe feels wobbly. | Loose connections; not properly anchored. | Ensure all assembly screws are tightened. Verify that the wardrobe is securely anchored to the wall. |
| Missing parts during assembly. | Packaging error. | Contact Demeyere customer support with your purchase details and the specific missing parts. |
8. Specifications
| Brand | Demeyere |
| Model Number | 391371 |
| Color | White (Matte finish) |
| Material | Engineered Wood |
| Product Dimensions (W x D x H) | 157.3 cm x 51.1 cm x 203 cm |
| Recommended Use | Clothing storage |
| Shelf Weight Capacity | Up to 16 kg per shelf |
| Drawer Weight Capacity | Up to 5 kg per drawer |
| Hanging Rod Weight Capacity | Up to 19 kg |
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Demeyere website. Demeyere is a PEFC certified company, committed to sustainable forestry.
If you encounter any issues or have questions regarding your Demeyere 391371 wardrobe, please contact Demeyere customer support through their official channels. Have your model number and purchase details ready when contacting support.
