1. Introduction
This manual provides instructions for the AULCMEET R3PA265 Replacement Voice Remote Control, designed for use with various Panasonic Smart LED 4K TV models. Please read this manual carefully before using the remote control to ensure proper operation and to maximize its lifespan.
2. Setup
2.1 Battery Installation
The remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch (if present) to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
Figure 1: Back of the remote control with the battery compartment open, illustrating the correct orientation for AAA battery insertion.
Figure 2: Back of the remote control with the battery compartment closed after battery installation.
2.2 Initial Connection / Pairing
This remote control is designed as a replacement. For basic infrared (IR) functions, it may work directly with compatible Panasonic TVs without additional setup. For voice control features, pairing with your TV might be required. Refer to your Panasonic TV's user manual for specific instructions on pairing a new voice remote control. Typically, this involves navigating to the TV's settings menu (e.g., Settings > Remotes & Accessories > Add device) and following the on-screen prompts.
Note: The manufacturer advises connecting the remote according to instructions upon receipt. If your TV manual does not provide specific pairing steps for a replacement voice remote, try pressing and holding the OK button and the Back button simultaneously for a few seconds while pointing the remote at the TV, or consult the TV manufacturer's support.
3. Operating Instructions
The AULCMEET R3PA265 remote control features a standard layout with dedicated buttons for various functions. Below is a general guide to the main buttons and their uses:
Figure 3: Front view of the AULCMEET R3PA265 remote control, showing all buttons.
Figure 4: Angled view of the remote control, highlighting its ergonomic design.
Figure 5: Second angled view of the remote control, showing button layout from a different perspective.
- Power Button (
): Turns the TV on or off. - Input Button: Selects the input source (HDMI, AV, etc.).
- Netflix, Prime Video, Google Play, YouTube Buttons: Direct access to these streaming applications.
- APPS Button: Opens the TV's application menu.
- MENU Button: Accesses the TV's main menu.
- Home Button (
): Returns to the TV's home screen. - Navigation Pad (Up, Down, Left, Right) & OK Button: Used to navigate menus and confirm selections.
- Back Button: Returns to the previous screen or menu.
- Exit Button: Closes the current menu or application.
- Volume Up/Down (+/-): Adjusts the TV volume.
- Channel Up/Down (∧/∨): Changes TV channels.
- Mute Button: Mutes or unmutes the TV audio.
- Number Buttons (0-9): Directly input channel numbers or other numerical data.
- Media Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Record): Controls media playback.
- Voice Control Button (often represented by a microphone icon or colored dots): Activates the voice assistant for commands.
- Last View Button: Switches to the previously viewed channel or input.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote control becomes unresponsive or its range decreases. Always replace both batteries at the same time with new AAA batteries.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place.
- Avoid Exposure: Keep the remote control away from direct sunlight, heat sources, and moisture.
5. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote control is not working. |
|
| Voice control is not functioning. |
|
| Some buttons do not work. |
|
| Unsure about compatibility. | Not all compatible models may be listed in product descriptions. If you are unsure, please contact the seller with the full model number of your TV for assistance. They typically respond within 24 hours. |
6. Specifications
| Feature | Detail |
|---|---|
| Model | R3PA265 |
| Brand | AULCMEET |
| Compatible Devices | Panasonic Smart LED 4K Televisions (e.g., TH-50LX800K, TX-43LXX889, etc.) |
| Connectivity Technology | Infrared (IR) |
| Special Features | Voice Control, Ergonomic Design |
| Power Supply | 2 x AAA Batteries (not included) |
| Number of Buttons | 25 |
| Maximum Range | 10 Meters |
| Product Dimensions | 14.5 x 4.5 x 1 cm |
| Item Weight | 90 g |
7. Support and Warranty
For technical support, compatibility inquiries, or any issues not covered in this manual, please contact the seller directly. When contacting support, provide the full model number of your Panasonic TV for accurate assistance.
The product package includes the remote control and a user manual (note: the included manual may not be in English). Information regarding specific warranty terms is not provided in the product details. Please refer to your purchase documentation or contact the seller for warranty information.