1. Introduction
This manual provides essential information for the safe and proper assembly, operation, and maintenance of your TMEOSK Metal Triple Bunk Bed. This versatile 3-in-1 bunk bed system is designed to be space-efficient, accommodating three twin-sized beds in a compact footprint. It can also be separated into three individual beds, offering flexible sleeping arrangements for families, guests, or friends.
2. Safety Information
Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions can result in serious injury.
- Ensure the bed is properly assembled according to the instructions to prevent instability or collapse.
- Be aware of the maximum weight capacity: 450 lbs per bed. Do not exceed this limit.
- The top bunk is equipped with a full-length guardrail. Always ensure the guardrail is securely in place when the top bunk is in use.
- Only one person should occupy the top bunk at a time.
- Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hooks, belts, or jump ropes.
- Always use the provided ladder for access to the upper bunk. Do not jump on or off the bed.
- Periodically check and ensure that all connectors are tight.

3. Setup and Assembly
Assembly of the TMEOSK Metal Triple Bunk Bed is required. All necessary accessories and hardware are included in the packaging. It is recommended to assemble the bed with at least two adults.
3.1. Unpacking and Component Identification
Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Verify that all parts listed in the assembly instructions are present before beginning assembly.

3.2. Assembly Steps
Follow the step-by-step assembly guide provided in your product packaging. Ensure all connections are secure and tightened appropriately. The U-shaped clamping slot design simplifies assembly and enhances structural stability.

3.3. Ladder Assembly
Attach the ladder securely to the upper bunk as per the instructions. The ladder features diamond-shaped rungs for comfortable and safe climbing.

4. Operating Instructions
4.1. Bunk Bed Configuration
The TMEOSK Metal Triple Bunk Bed is designed as a twin over twin & twin configuration, providing three sleeping surfaces. The upper bunk is accessed via the integrated ladder, and the two lower beds are positioned side-by-side.

4.2. Separating into Individual Beds
This bunk bed can be divided into three separate twin-sized beds. Refer to the assembly instructions for detailed steps on how to safely disassemble the bunk bed structure and reconfigure it into individual bed frames. This feature offers versatility for different room layouts or changing needs.

4.3. Built-in Shelf
The upper bed features a built-in shelf, providing convenient storage space for small daily necessities such as books, glasses, or a phone.
5. Maintenance
Proper maintenance ensures the longevity and safety of your bunk bed.
- Cleaning: For general cleaning, wipe the metal frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish. Product care instructions specify "Hand Wash Only" for cleaning the frame.
- Tightening Connections: Periodically (e.g., every 3-6 months) check all bolts, screws, and connections to ensure they are tight. Re-tighten if necessary to maintain structural integrity and prevent squeaking.
- Mattress Support: The metal slats support the mattress without sliding and are designed to increase mattress life. Ensure no slats are bent or damaged.
6. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose connections or improper assembly. | Check all bolts and screws. Tighten any loose connections. Refer to the assembly instructions to ensure all parts are correctly installed. |
| Squeaking noises. | Loose bolts or friction between metal parts. | Tighten all assembly bolts. If squeaking persists, apply a small amount of silicone lubricant to connection points (avoiding areas that contact mattresses or bedding). |
| Ladder feels insecure. | Ladder not properly attached or mounting hardware is loose. | Ensure the ladder hooks are fully engaged and any securing bolts are tightened. |
7. Specifications
| Feature | Detail |
|---|---|
| Bed Material | Metal (Heavy-Duty Steel) |
| Size | Twin over Twin&Twin |
| Color | Black |
| Overall Product Dimension | 91.73''L x 77.95''W x 72.05''H |
| Upper Bed Weight Capacity | 450 lbs |
| Bottom Bed Weight Capacity | 450 lbs (each) |
| Overall Product Weight | 139 lbs |
| Recommended Mattress Thickness | 8''-10'' |
| Assembly Required | Yes |
| Special Feature | Can be divided into 3 Separate Beds, Built-in Shelf |
| UPC | 768733177535 |
| Manufacturer | TMEOSK |
| Country of Origin | China |

8. Warranty and Support
8.1. Return Policy
This product is eligible for a 30-day return policy for refund or replacement, as per the seller's terms. Please refer to your purchase platform for specific return instructions and conditions.
8.2. Protection Plans
Extended protection plans may be available for purchase separately to cover your product beyond the standard return period. Options may include 2-Year or 3-Year Protection Plans. Please check the product listing or your purchase details for more information on available plans.
8.3. Customer Support
For any questions regarding assembly, missing parts, or product functionality, please contact the manufacturer, TMEOSK, or the seller, TMEOSK shop, through the platform where the product was purchased. Provide your model number (Metal Triple Bunk Bed for 3-TME01) and purchase details for faster assistance.