Kittyhok BC5B 2K Solar Security Camera User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Kittyhok BC5B 2K Solar Security Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

The Kittyhok BC5B is a 2K (4MP) wireless outdoor security camera designed for home surveillance. It features solar power for continuous operation, smart detection capabilities, color night vision, and two-way audio. The camera is weatherproof and offers local storage options.

2. What's in the Box

Verify that all components are present in your package:

• Camera Body
• Solar Panel
• Charging Cable
• Instruction Manual (this document)
• Mounting Screws

Note: The exact components and quantities may vary slightly depending on your specific model number.

3. Setup and Installation

3.1 Initial Camera Recharge

It is recommended to fully recharge the camera before initial installation. Connect the camera to a 5V 1A or 2A DC phone charger (not included) using the provided charging cable. The indicator light will blink green during charging. It will stop blinking when fully charged. This typically takes 4-6 hours.

Note: Use only 5V DC power chargers. Chargers that do not meet the standard may damage the batteries. Please charge the battery at room temperature to avoid damage.

Image: A Kittyhok solar security camera mounted on an exterior wall next to its solar panel, highlighting its wire-free operation.

3.2 Mounting the Camera and Solar Panel

Install the camera 2-3 meters (7-10 feet) above the ground. This height maximizes the detection range of the motion sensor. For optimal motion detection, install the camera at an angle rather than directly facing the detection area.

For dome cameras (if applicable to your system), they must be installed upside down for better waterproof performance and motion sensor efficiency.

Ensure the solar panel is positioned to receive 2-3 hours of direct sunlight daily for continuous power.

Image: Illustrations demonstrating different mounting configurations for the camera, including wall, ceiling, and stand mounts, along with the adjustable solar panel.

Image: A person using a drill to install a Kittyhok security camera on a wall, emphasizing ease of installation.

3.3 Connecting Your System (NVR)

If your system includes an NVR (Network Video Recorder), follow these steps:

1. Connect the NVR to power using the included power adapter. Connect a mouse to the NVR's USB port.
2. Connect the NVR to a PC monitor or TV with an HDMI cable. Skip this step if your NVR has a built-in monitor. A monitor is required for initial setup. After completing the initial setup, your NVR does not need to be connected to a TV or monitor to view or capture recordings.
3. Connect the NVR to your router with an Ethernet cable if you plan to use it remotely. You can also connect the NVR to your router via Wi-Fi through the NVR's Network Setting > Wireless network setting.
4. Follow the on-screen steps of the Startup Wizard on the monitor/TV to complete the initial setup.
5. Turn on the power switch on the battery cameras. You should see each camera appear on your monitor/TV.
6. Bring cameras to desired mounting locations, power them on, and go back to the NVR screen. Wait 5 minutes to see if they stream fluently. If a camera does not stream well, move it to a location with less obstacles in line-of-sight from the NVR.

Note: Select a least interfered Wi-Fi channel so your NVR performs its best Wi-Fi capability. In NVR's menu System setting > Network > NVR Wi-Fi hotspot, click Adaptive Channel.

3.4 Pairing a New Camera to the NVR

By default, each camera within your NVR kit comes pre-paired to the NVR. If you want to add more cameras, follow these steps:

1. Hold the ON/OFF switch of the camera to turn it on. Make sure the camera is in Pairing Mode. If not, reset the camera to bring it to Pairing Mode.
2. With the NVR connected to a TV/Monitor, click the '+' icon at the bottom and follow the on-screen guide to pair your camera to the NVR.
3. Once paired successfully, the new camera will appear in a vacant video field.

Note: Pairing a replacement camera is similar to adding a new add-on camera. You need to delete the old camera from NVR first, and then start pairing the replacement camera to NVR.

3.5 Positioning Your NVR and Cameras

Camera distance from NVR can reach up to 1300 ft. wirelessly in line of sight. Proper placement of the wireless NVR in your home will help ensure you achieve maximum coverage.

Do not place near high voltage wires or other sources of electrical interference. Electrical interference will degrade the quality of the signal.

4. Operating Your Camera System

4.1 Accessing Your System via Smartphone

Download the Kittyhok App from the App Store or Google Play and install it on your smart device.

Launch the App, register a user account, and log in.

In the App, tap the '+' button and then tap Scan to add. Scan the QR code on the NVR and follow the on-screen instructions to add the NVR.

Note: The QR code can also be found in NVR's System setting > Download the App.

4.2 Accessing Your System via PC and Mac

Download and install the CMS (Central Management Software) on your computer. Go to https://kittyhok.com/pages/download.

Login with your phone App user account; your system will be automatically synced to the CMS.

Note: You can also add your system to the CMS Client with Cloud ID manually.

4.3 Key Features

• 2K (4MP) Resolution: Captures clear and detailed video footage.
• Color Day & Night Vision: Provides vivid color images during the day and at night with powerful spotlights.
• Smart Detection (PIR+): Minimizes false notifications by detecting persons and cars.
• Two-Way Audio: Listen and talk through the camera from anywhere using the app.
• Local Storage: Supports SD card (up to 256GB, not included) for video storage with no monthly fees.
• Weatherproof: Designed to work in various weather conditions (IP66 rated).

Image: A Kittyhok camera facilitating a two-way audio conversation between a homeowner and a delivery driver.

Image: A side-by-side comparison demonstrating the clarity and color provided by the camera's night vision with the spotlight on, versus standard black and white night vision.

Image: A smartphone displaying a notification from the Kittyhok app, indicating human detection by the security camera.

Image: A Kittyhok camera and its solar panel shown during rainfall, illustrating its weatherproof construction.

5. Maintenance

5.1 Solar Panel Efficiency

The solar panel requires 2-3 hours of daily sunlight to maintain continuous power for the camera. Regularly clean the solar panel to ensure maximum efficiency. Dust, dirt, or debris can reduce its ability to charge the camera's battery.

5.2 Battery Life

Without the solar panel, the camera's batteries can last 45-120 days depending on activation frequency. With solar panels, batteries are replenished daily, eliminating the need for manual recharging.

5.3 Weather Protection

The camera is designed to be weatherproof (IP66 rated). However, ensure all connections are secure and covers are properly sealed to prevent water ingress.

6. Troubleshooting (Frequently Asked Questions)

6.1 Why cannot I see continuous live video on the monitor?

Because the cameras automatically enter standby mode to save power. As a thermal detection security system powered with solar and batteries, the system works when activities are detected and stands by when there is no activity.

6.2 Does the system have to be connected to a monitor all the time?

No. Connecting the NVR to your TV or monitor enables you to enter the NVR's menu. It is necessary for the initial setup. After the setup is complete, you can view the NVR from its screen and view the system on your smartphone or tablet.

If you are using a TV, you can switch the signal source to TV programs and switch back to this HDMI connection while needed.

6.3 Does the battery/solar cameras record 24/7?

Yes but not by default. All solar/battery-powered security cameras record motion-triggered activities only. If you need 24/7 cameras, please go for Wi-Fi security camera system with plug-in power.

You can also plug this camera to power with a 5V DC phone charger, then switch to Continuous Recording Mode to make it work 24/7.

6.4 Why my cameras run out of batteries fast?

1. Make sure to fully recharge your cameras before you mount them. It shall take 4-6 hours to fully charge them.
2. When you are using solar panel as the power source, make sure the camera is in Event Record Mode. If you want the cameras to work in Continuous Record Mode, plug the cameras to wall outlets with 5V power chargers.
3. Make sure your solar panel is properly installed to obtain solar power.

6.5 Do I have to use the cameras with solar panels?

No, you can use the cameras without solar panels. The cameras' batteries last 45-120 days depending on how often they are activated. You will need to take the cameras down to recharge when battery is low.

With solar panels, they replenish power to batteries every day. It saves the troubles to take cameras down for recharge.

7. Specifications

8. Warranty and Support

8.1 Manufacturer Warranty

Your Kittyhok BC5B 2K Solar Security Camera comes with a 1-Year Warranty. This warranty typically covers manufacturing defects and ensures replacement rather than repair for eligible issues.

8.2 Customer Support

Kittyhok offers 24/7 online support. For assistance, please visit the official Kittyhok website or contact their customer service directly.

Additionally, Kittyhok provides a 30-Day Money Back Guarantee.

For more information and support resources, visit: www.kittyhok.com

9. Official User Manual Video Guide

For a comprehensive visual guide on setting up and operating your Kittyhok Solar Security Camera System, please watch the official user manual video below.