Mcbazel Double Automatic Watch Winder Box User Manual

Introduction

Thank you for choosing the Mcbazel Double Automatic Watch Winder Box. This elegant watch winder is designed to keep your automatic watches wound and ready to wear, protecting them from scratches and ensuring their longevity. Featuring a transparent acrylic window and soft flannel interior, it combines functionality with sophisticated design. The quiet motor ensures undisturbed operation, even in a bedroom setting.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your watch winder. Please read it carefully before use to ensure optimal performance and care for your timepieces.

Package Contents

Please verify that all items listed below are included in your package:

• 1 x Mcbazel Double Automatic Watch Winder Box
• 1 x Wiping Cloth
• 1 x User Manual
• 1 x DC&DC Connecting Cable (for serial connection)
• 1 x USB-DC Power Cable

Setup Instructions

1. Power Connection

The watch winder is powered via a USB-DC power cable. It supports any mobile phone power adapter with an output voltage of 3V~9V (power adapter not included). Connect the USB-DC power cable to the winder's power input port and then to a suitable power adapter.

2. Serial Power Supply Function

Multiple watch winders can be connected in series using the provided DC&DC connecting cable. Connect the 'Power Output' of one winder to the 'Power Input' of another to power them simultaneously from a single adapter.

3. Preparing Your Watch

Before placing your automatic watch into the winder, it is crucial to manually pre-wind it. Rotate the watch crown 20-40 times. This fully winds the mainspring, providing sufficient power and preventing the watch from stopping due to insufficient winding. The winder is designed to maintain the power reserve, not to fully wind a stopped watch.

4. Placing Your Watch

The winder comes with high-quality adjustable pillows suitable for watches with a dial diameter less than 58mm, a dial thickness less than 28mm, and a watch circumference of 180mm to 210mm. Adjust the pillow to securely fit your watch before placing it into the winder slot.

Operating Instructions

The watch winder offers two distinct gear modes to accommodate various watch winding requirements. It is recommended to consult your watch's official manual or search online for its specific winding needs (Turns Per Day - TPD) to select the correct mode.

Winding Modes:

• OFF: Turns off the watch winder.
• Gear B (Short-term use): Rotates clockwise for 2 minutes, pauses for 6 minutes. Then rotates counter-clockwise for 2 minutes, pauses for 6 minutes. Repeats this cycle.
• Gear L (Long-term use): Rotates counter-clockwise for 2 minutes, pauses for 18 minutes. Then rotates clockwise for 2 minutes, pauses for 18 minutes. Repeats this cycle.

You can switch between modes or turn off the winder using the control switch located on the unit.

Maintenance

Cleaning:

Use the provided wiping cloth to gently clean the exterior of the watch winder. For faux leather surfaces, a slightly damp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.

Dust Protection:

The transparent dust cover helps protect your watches from dust and environmental particles. Keep the cover closed when watches are inside the winder to maintain cleanliness.

General Care:

Ensure the winder is placed on a stable, flat surface. The anti-slip bottom design helps prevent movement. Avoid exposing the winder to direct sunlight, extreme temperatures, or high humidity.

Troubleshooting

• Device Stuck or Unable to Charge: Ensure you are using a mobile phone charger adapter with an output voltage between 3V and 9V. The power adapter is not included with the product. Verify the cable connections are secure.
• Cannot Maintain Watch Power Reserve: The watch winder is an auxiliary winding device designed to simulate natural wrist movement and maintain a watch's power reserve. It cannot replace daily wear or fully wind a completely stopped watch. Before placing a watch in the winder, manually wind it 20-40 times to ensure sufficient power. It is recommended to fully wind your watch manually once a week.
• Product Not Turning On or Perceived Instability: This is most likely due to the device being in a "pause mode state," which is part of its normal operating cycle. The winder is designed for intermittent rotation rather than continuous spinning. Refer to the mode instructions (Gear B / Gear L) to confirm if the device is in a pause interval.
• Magnetic Sensitivity Warning: This watch winder does not provide anti-magnetic protection. To avoid potential interference with timekeeping, do not place watches that are sensitive to magnetic fields (including both mechanical and quartz) inside this winder. Always consult your watch manufacturer’s guidelines regarding magnetic resistance.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Mcbazel website. Keep your purchase receipt as proof of purchase for any warranty claims.