Arachnid Cricket Pro 800 Electronic Dartboard Instruction Manual

Introduction

Thank you for choosing the Arachnid Cricket Pro 800 Electronic Dartboard with Black Cabinet. This high-quality electronic dartboard is designed for both casual and serious players, offering a wide variety of games and features for an engaging dart experience. With its durable NylonTough segments and micro-thin segment dividers, it significantly reduces bounce-outs, ensuring more accurate scoring and enjoyable gameplay. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your new dartboard.

Package Contents

Before beginning installation, please ensure all components are present:

• Arachnid Cricket Pro 800 Electronic Dartboard
• Extra Large Dartboard Cabinet (Black)
• Mounting Hardware (2 dedicated bolts)
• Dart Holder (built-in)
• Soft-tip Darts (quantity may vary, typically 6-12)
• Instruction Manual (this document)

Setup and Installation

Proper installation is crucial for the stability and performance of your dartboard. The cabinet is designed to fit the 15.5" target area dartboard and includes 12mm thick doors with deluxe steel hinges.

Image: Arachnid Cricket Pro 800 Electronic Dartboard with Black Cabinet. This image displays the full product, including the electronic dartboard and the accompanying black wooden cabinet with closed doors.

1. Choose a Location: Select a sturdy wall in an area with sufficient space for throwing darts. Ensure there is at least 8 feet of clear space from the throwing line to the dartboard. The recommended height for the bullseye is 5 feet 8 inches (1.73 meters) from the floor.
2. Mark Mounting Points: Hold the dartboard cabinet against the wall at the desired height. Use a pencil to mark the locations for the two dedicated mounting hardware bolts. Ensure the marks are level.
3. Drill Pilot Holes: Using an appropriate drill bit for your wall type (e.g., wood studs, drywall anchors), drill pilot holes at the marked locations.
4. Install Mounting Hardware: Insert the mounting bolts into the pilot holes. If installing into drywall, use appropriate wall anchors (not included) to ensure a secure fit. Tighten the bolts until they are firmly in place, leaving enough of the bolt exposed to hang the cabinet.
5. Hang the Dartboard Cabinet: Carefully align the keyhole slots on the back of the dartboard cabinet with the installed mounting bolts. Slide the cabinet down onto the bolts until it is securely seated.
6. Connect Power: Plug the AC adapter into the dartboard's power input jack and then into a standard electrical outlet.

Operating Instructions

The Cricket Pro 800 offers a user-friendly interface with a four-player jumbo X/O LED score display and support for up to eight players. It features 39 games with 179 variations, including seven cricket games.

Image: Arachnid Cricket Pro 800 Dartboard Display. This image shows the lower section of the dartboard, highlighting the electronic display panel with player scores and game information visible.

1. Power On: Press the POWER button to turn on the dartboard. The display will illuminate.
2. Select Game: Use the GAME buttons (usually labeled with arrows or specific game names) to scroll through the available 39 games. The selected game name will appear on the display.
3. Select Variation: Many games have multiple variations. Use the VARIATION button to choose your preferred game rules.
4. Select Players: Press the PLAYER button repeatedly to select the number of players (up to 8). The jumbo X/O LED display will show the active players.
5. Start Game: Once the game, variation, and number of players are set, press the START button to begin play.
6. Throwing Darts: Throw your soft-tip darts at the board. The electronic scoring system will automatically register hits. The NylonTough segments and micro-thin dividers are designed to minimize bounce-outs.
7. Next Player: After a player completes their turn (typically 3 darts), the dartboard will automatically advance to the next player. If a dart does not register, ensure it is fully inserted into the segment.
8. Heckler Mode: The dartboard may include a 'Heckler' feature for added fun. Refer to the on-screen prompts or specific buttons for activating and adjusting this mode.
9. Volume Control: Adjust the sound volume using the dedicated VOLUME buttons.
10. Reset Game: To end a game and start a new one, press the RESET button.

Care and Maintenance

To ensure the longevity and optimal performance of your Arachnid Cricket Pro 800 dartboard, follow these care and maintenance guidelines:

• Cleaning: Wipe the dartboard surface and cabinet with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but avoid excessive moisture. Do not use abrasive cleaners or solvents, as they can damage the electronic components and finish.
• Dart Tips: Regularly inspect the soft tips of your darts. Replace any bent, broken, or worn tips to prevent damage to the dartboard segments and ensure proper scoring.
• Segment Care: The NylonTough segments are designed for durability. If a segment becomes stuck or unresponsive, gently try to dislodge any debris. Avoid using excessive force when removing darts to prevent damage to the segments.
• Storage: When not in use, close the cabinet doors to protect the dartboard from dust and accidental damage. The built-in dart holders can store up to 12 darts.
• Power: Unplug the dartboard from the power outlet when not in use for extended periods.

Troubleshooting

If you encounter any issues with your Arachnid Cricket Pro 800 dartboard, refer to the following common problems and solutions:

Product Specifications

• Brand: Arachnid
• Model: Cricket Pro 800
• Material: Nylon (segments), Wood (cabinet)
• Color: Black, Red (dartboard), Black (cabinet)
• Product Dimensions (Cabinet Assembled): 24" L x 4" D x 35.4" H
• Target Area: Regulation 15.5"
• Games: 39 games with 179 variations (including 7 Cricket games)
• Players: Up to 8 players
• Display: Four-player jumbo X/O LED score display
• Special Features: NylonTough segments, Micro-thin segment dividers, Built-in dart holders, 12mm thick cabinet doors with deluxe steel hinges.
• Included Components: Dart Holder, Dartboard, Mounting Hardware

Warranty Information

Specific warranty details for the Arachnid Cricket Pro 800 Electronic Dartboard are not provided in this manual. Please refer to the warranty card included with your product packaging or visit the official Arachnid website for the most current warranty terms and conditions. Typically, electronic dartboards come with a limited manufacturer's warranty covering defects in materials and workmanship for a specified period from the date of purchase.

Customer Support

For technical assistance, replacement parts, or further inquiries regarding your Arachnid Cricket Pro 800 Electronic Dartboard, please contact Arachnid customer support. Contact information can usually be found on the product packaging, the manufacturer's official website, or through your retailer's support channels.

You can visit the official Arachnid Store for more information: Arachnid Store on Amazon