1. Introduction
This manual provides essential information for the safe and effective operation, installation, and maintenance of your VEVOR WX1320-1 1320lbs Wireless Electric Hoist. Please read all instructions carefully before use to ensure proper function and prevent injury or damage.
Key Features:
- Wireless Remote Control: Operates up to 328 feet (100 meters) for enhanced safety and convenience. Includes an emergency stop button.
- Dual Lifting Modes: Supports single-line lifting up to 660 lbs (39.4 ft height, 32 ft/min speed) and double-line lifting up to 1320 lbs (19.7 ft height, 16 ft/min speed).
- Powerful Motor: Equipped with a 1150W motor and a large cooling fan to prevent overheating and ensure efficient operation.
- Durable Construction: Features an anti-deformation steel frame, 19-strand thickened steel wire rope, and a high-strength metal hook for long-term reliability.
- Easy Installation: Designed for two-step hanging installation on ceilings or beams.
- Included Accessories: Comes with a 13ft lifting sling strap and a 3.2ft shaft belt with metal ring.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or death.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hard hat.
- Ensure the hoist is securely mounted to a structure capable of supporting the maximum load capacity.
- Never exceed the rated load capacity of the hoist.
- Inspect the hoist, wire rope, hooks, and slings for damage before each use. Do not use if any components are worn or damaged.
- Keep hands and body clear of moving parts, especially the wire rope and hook.
- Do not operate the hoist if the wire rope is twisted, kinked, or frayed.
- Ensure the load is balanced and securely attached before lifting.
- Avoid sudden starts or stops when lifting or lowering a load. Operate smoothly.
- Do not use the hoist to lift people or loads over people.
- Disconnect power before performing any maintenance or adjustments.
- Keep the work area clear of obstructions and ensure adequate lighting.
- The wireless remote control includes an emergency stop button. Familiarize yourself with its location and function.
3. Product Components
The VEVOR WX1320-1 Electric Hoist package includes the following items:
- 1 x Electric Hoist Unit
- 1 x Wireless Remote Control
- 1 x 1m (3.2ft) Strap with Metal Ring
- 1 x 4m (13ft) Strap
- Mounting Brackets and Hardware
- Dual-line Pulley Hook (for double-line operation)
Figure 3.1: Hoist with included lifting slings.
4. Setup and Installation
The VEVOR electric hoist is designed for straightforward hanging installation. Follow these steps carefully:
- Choose a Mounting Location: Select a sturdy ceiling or beam capable of safely supporting the hoist's weight and the maximum intended load. Ensure the mounting surface is level and free from obstructions.
- Attach Mounting Brackets: Use the provided mounting brackets and hardware to securely fasten the hoist to the chosen location. The installation typically involves two main steps: attaching the U-shaped brackets to the hoist and then securing them to the overhead structure. Ensure all bolts are tightened to the manufacturer's specifications.
Figure 4.1: Two-step hanging installation process.
- Connect Power: Plug the hoist into a compatible 110V power outlet. Ensure the power source meets the hoist's electrical requirements.
- Test Functionality: Before lifting any loads, perform a test run with no load to ensure the hoist operates correctly, including the up/down functions and the emergency stop.
Unboxing and Initial Setup Video:
Video 4.1: An unboxing and initial setup guide for the electric hoist, demonstrating how to prepare the unit for use.
5. Operating Instructions
The VEVOR electric hoist offers two modes of operation: single-line and double-line lifting.
5.1. Single-Line Operation
For lighter loads, use the single-line configuration. The hoist will lift up to 660 lbs with a maximum height of 39.4 ft and a speed of 32 ft/min.
5.2. Double-Line Operation
For heavier loads, attach the pulley hook to create a double-line configuration. This mode allows lifting up to 1320 lbs, with a maximum height of 19.7 ft and a speed of 16 ft/min. The double-line setup effectively halves the lifting speed and height but doubles the capacity.
Figure 5.1: Comparison of single-line and dual-line lifting modes.
5.3. Wireless Remote Control
The hoist is operated using a wireless remote control, providing a range of up to 328 feet. This allows for safe operation from a distance.
- UP Button: Press to raise the load.
- DOWN Button: Press to lower the load.
- Emergency Stop Button: Press this red button immediately in case of an emergency or unexpected operation to cut power to the hoist.
Figure 5.2: Wireless remote control operation and safety features.
Always ensure a clear line of sight to the hoist and load during operation. Avoid operating the hoist in adverse weather conditions or environments that could interfere with the wireless signal.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your VEVOR electric hoist.
- Wire Rope Inspection: Regularly check the steel wire rope for signs of wear, fraying, kinks, or corrosion. Replace the rope immediately if any damage is observed.
- Hook and Latch Inspection: Inspect the lifting hook and safety latch for deformation, cracks, or wear. Ensure the latch operates freely.
- Motor and Cooling System: Keep the motor housing and cooling fan free from dust and debris to ensure proper heat dissipation.
- Mounting Hardware: Periodically check all mounting bolts and connections to ensure they remain tight and secure.
- Lubrication: Consult a qualified technician for any lubrication requirements of internal components.
- Cleaning: Clean the exterior of the hoist with a damp cloth. Do not use harsh chemicals or immerse the unit in water.
Always disconnect power to the hoist before performing any maintenance or cleaning.
7. Troubleshooting
If you encounter issues with your VEVOR electric hoist, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hoist does not operate | No power supply Emergency stop engaged Remote control battery low | Check power connection and circuit breaker Release emergency stop button Replace remote control batteries |
| Motor runs but hoist does not lift | Overload Wire rope jammed | Reduce load to within capacity Inspect wire rope for obstructions or damage |
| Hoist stops during operation | Overheat protection activated Limit switch engaged | Allow motor to cool down Check if load has reached upper or lower limit |
| Remote control not responding | Out of range Interference Battery issue | Move closer to the hoist Reduce sources of interference Replace remote control batteries |
If the problem persists after attempting these solutions, contact VEVOR customer support or a qualified technician.
8. Specifications
Detailed technical specifications for the VEVOR WX1320-1 Electric Hoist:
| Feature | Specification |
|---|---|
| Model Number | WX1320-1 |
| Dual-line Lifting Capacity | 1320 lbs / 600 kg |
| Single-line Lifting Capacity | 660 lbs / 300 kg |
| Single-line Lifting Height | 39.4 ft / 12 m |
| Double-line Lifting Height | 19.7 ft / 6 m |
| Single-line Lifting Speed | 32 ft/min / 10 m/min |
| Double-line Lifting Speed | 16 ft/min / 5 m/min |
| Motor Power | 1150W |
| Voltage | 110V~, 60Hz |
| Rated Rotation Speed | 2800 rpm |
| Rated Torque | 3.9 Nm |
| Control Method | Wireless Remote Control (328 ft / 100 m range) |
| Product Dimensions | 15.4 x 6 x 7 inches / 390 x 150 x 180 mm |
| Item Weight | 40.7 pounds / 18.46 kg |
| Material | Metal |
| Color | Red |
Figure 8.1: Product dimensions and specifications overview.
9. Warranty and Support
VEVOR products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official VEVOR website. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or parts inquiries, please contact VEVOR customer service through their official channels. Provide your product model number (WX1320-1) and purchase date for faster service.
