Elecshion 2-in-1 Cordless Hedge Trimmer & Grass Shear

1. Introduction

Thank you for choosing the Elecshion 2-in-1 Cordless Hedge Trimmer and Grass Shear. This versatile tool is designed to simplify your gardening tasks, offering both hedge trimming and grass cutting capabilities in a single, lightweight, and battery-powered unit. Its clever design combines long blades for hedges and short blades for grass, making it ideal for maintaining hedges, bushes, small trees, and lawns with ease.

Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x Tool Body (Main Unit)
• 1 x Grass Shears Blade
• 1 x Hedge Trimmer Blade
• 1 x Safety Goggles
• 1 x Pair of Gloves
• 2 x 21V 1500mAh Lithium-Ion Rechargeable Batteries
• 1 x 0.75A Charger
• 1 x User Manual

3. Safety Instructions

WARNING: Always wear safety goggles and gloves when operating this tool.

• Safety Lock: The electric hedge trimmer is equipped with a safety switch to prevent accidental injury. To start, push the trigger lock and press the main trigger simultaneously.
• Battery Safety: Always remove the battery from the tool when not in use, before cleaning, or when changing blades.
• Blade Handling: Blades are sharp. Handle with extreme care. Never touch the blades while the tool is running.
• Work Area: Keep the work area clear of debris, children, and pets. Ensure good footing and balance.
• Personal Protective Equipment: Always wear appropriate personal protective equipment, including safety goggles, gloves, and sturdy footwear.
• Storage: Store the tool and batteries in a dry, secure place out of reach of children.

4. Setup

4.1 Charging the Battery

The Elecshion hedge trimmer is powered by a rechargeable and detachable 21V 1500mAh lithium battery. Fully charge the battery before first use and after each use before storage.

1. Remove the battery from the tool by pressing the release button and sliding it out.
2. Connect the charger to the battery.
3. Plug the charger into a standard power outlet.
4. The battery will fully charge in approximately 2 hours, providing about 120 minutes of total working time.

4.2 Attaching/Detaching Blades

The tool comes with two interchangeable blades: a grass shears blade and a hedge trimmer blade.

1. Ensure the battery is removed from the tool before changing blades.
2. To detach a blade, locate the release button/mechanism on the blade attachment. Press it and slide the blade unit off the main tool body.
3. To attach a blade, align the desired blade unit with the main tool body and slide it into place until it clicks securely. Ensure it is firmly seated.

5. Operating Instructions

Once the desired blade is attached and the battery is inserted, the tool is ready for operation.

5.1 General Operation

1. Ensure your work area is clear and you are wearing appropriate safety gear.
2. To start the tool, push the safety trigger lock (located on the side) and simultaneously press the main trigger.
3. Release the main trigger to stop the tool.

5.2 Hedge Trimming

Use the longer hedge trimmer blade for shaping and cutting thin shoots on hedges, bushes, and small ornamental trees.

• Hold the trimmer firmly with both hands if possible, or one hand if comfortable and safe for smaller tasks.
• Move the trimmer smoothly and evenly along the hedge line.
• Avoid forcing the blade through thick branches. If you encounter resistance, reposition the tool or use a different cutting method.

5.3 Grass Cutting

Attach the shorter grass shears blade for cutting grass, weeds, and small sections of lawns, especially in hard-to-reach areas like corners and around stone paths.

• Hold the trimmer close to the ground, ensuring the blade is parallel to the surface.
• Move the tool in a sweeping motion to cut grass evenly.
• Be careful not to hit hard surfaces or objects with the blade.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your tool.

6.1 Cleaning the Blades

It is crucial to clean the blades after each use to prevent sap and debris buildup.

1. Ensure the battery is removed from the tool.
2. Spray both sides of the grass shear blades or hedge trimmer blades with a resin solvent (not included in package).
3. Mount the blades back onto the tool (without the battery).
4. If safe to do so, briefly switch on the shrub shears for 5 seconds (with battery inserted and safety precautions taken) to distribute the resin solvent evenly.
5. Use a damp cloth (not included in package) to wipe the blade clean.

6.2 Storage

• Always take off the batteries after finishing work.
• Charge the battery fully before storage to maintain its health.
• Clean and dry the shrub shears and cutting blades thoroughly before storing.
• Store the tool and its components in a cool, dry place, away from direct sunlight and moisture.

7. Troubleshooting

If you encounter issues with your Elecshion trimmer, try the following common solutions:

• Tool Not Starting: Ensure the battery is fully charged and properly inserted. Confirm the safety lock is disengaged by pressing it simultaneously with the main trigger.
• Blades Not Moving/Stuck: Check for any debris or tangled material around the blades. Remove the battery, clear any obstructions, and then re-attach the battery. If you can't attach or remove the blade, please try to start the machine again and wait ten seconds for the blade to turn, then remove the blade.
• Reduced Cutting Performance: Blades may be dull or dirty. Refer to the cleaning section (6.1) for maintenance. If dull, consider professional sharpening or replacement.
• Short Battery Life: Ensure the battery is fully charged. Battery performance can decrease over time with repeated use and charging cycles.

If problems persist after attempting these steps, please contact customer support.

8. Specifications

9. Warranty & Support

For warranty information, technical support, or any questions regarding your Elecshion 2-in-1 Cordless Hedge Trimmer & Grass Shear, please contact Elecshion customer service through the retailer's platform or visit the official Elecshion website.

Please have your model number (E-J147) and purchase details ready when contacting support.