ConvOw Replacement Parts User Manual for Xiaomi Mijia K10 PRO Vacuum Cleaner

Introduction

This document outlines the proper use and care for ConvOw replacement parts designed for the Xiaomi Mijia K10 PRO vacuum cleaner. These parts include HEPA filters, mop cloths, and a cleaning brush. Regular replacement and maintenance of these components ensure optimal performance of your vacuum cleaner.

• Sweeping Machine Kit Components: Made from high-quality, environmentally friendly materials, ensuring softness and durability.
• Absorbent Fiber Mop Cloths: Designed for both dry and wet cleaning, effectively wiping floors clean and hygienically.
• Reusable Mop Cloths: Feature strong and long-lasting cleaning power, resistant to fuzzing.
• HEPA Filters: Capable of blocking 99.97% of particles as small as 0.3 microns in size.
• Cleaning Cloth: Effective for handling various floor stains such as footprints, juice residue, and oil stains.

Important Safety Information

Please read all instructions carefully before installing or using the replacement parts.

• Ensure the vacuum cleaner is powered off and unplugged before attempting any installation or replacement.
• Keep replacement parts out of reach of children.
• Use only genuine ConvOw replacement parts to ensure compatibility and maintain product performance.
• Dispose of old parts responsibly according to local regulations.

Setup and Installation

This section details the steps for installing the replacement HEPA filters and mop cloths.

Installing the HEPA Filter

1. Power off and unplug your Xiaomi Mijia K10 PRO vacuum cleaner.
2. Locate the dustbin compartment on your vacuum cleaner.
3. Open the dustbin and remove the old HEPA filter.
4. Insert the new ConvOw HEPA filter into the designated slot in the dustbin. Ensure it is seated correctly.
5. Close the dustbin and reinsert it into the vacuum cleaner.

Installing the Mop Cloth

1. Power off and unplug your Xiaomi Mijia K10 PRO vacuum cleaner.
2. Locate the mop attachment or water tank on your vacuum cleaner.
3. Remove the used mop cloth from the attachment.
4. Attach the new ConvOw mop cloth to the mop attachment, ensuring it is securely fastened.
5. Reattach the mop attachment or water tank to the vacuum cleaner.

Operating and Use

Once the replacement parts are installed, your Xiaomi Mijia K10 PRO vacuum cleaner is ready for operation.

• HEPA Filter: The HEPA filter works automatically during vacuuming to capture fine particles and allergens. No specific user action is required beyond proper installation.
• Mop Cloth: For mopping functions, ensure the water tank is filled (if applicable to your model) and the mop cloth is attached. The vacuum cleaner will then perform its mopping cycle.

Refer to your Xiaomi Mijia K10 PRO vacuum cleaner's original user manual for detailed operating instructions of the device itself.

Maintenance

Regular maintenance of these replacement parts extends their lifespan and ensures efficient cleaning performance.

HEPA Filter Maintenance

1. Cleaning: Gently tap the HEPA filter over a trash can to remove loose dust. For deeper cleaning, rinse the filter under running water (if specified by the original vacuum cleaner manual for washable filters) and allow it to air dry completely for at least 24 hours before reinstallation. Do not use brushes or harsh detergents.
2. Replacement: It is recommended to replace the HEPA filter every 3-6 months, or more frequently depending on usage and household environment (e.g., pets, allergies).

Mop Cloth Maintenance

1. Cleaning: After each mopping session, remove the mop cloth from the vacuum cleaner. Hand wash or machine wash the mop cloth with mild detergent. Avoid using bleach or fabric softeners.
2. Drying: Air dry the mop cloth completely before reattaching it to prevent mildew and odors.
3. Replacement: Mop cloths can be reused multiple times. Replace them when they show signs of wear, reduced absorbency, or damage, typically every 1-3 months depending on usage.

Troubleshooting

This section addresses common issues related to the replacement parts.

• Reduced Suction Power:
  • Check if the HEPA filter is clogged. Clean or replace it as per the maintenance instructions.
  • Ensure the dustbin is empty and properly installed.
• Ineffective Mopping:
  • Check if the mop cloth is dirty or worn out. Clean or replace it.
  • Ensure the mop cloth is securely attached and making proper contact with the floor.
  • Verify the water tank (if applicable) is filled and dispensing water correctly.
• Parts Not Fitting:
  • Double-check that you have purchased the correct ConvOw replacement parts for the Xiaomi Mijia K10 PRO model.
  • Ensure parts are aligned correctly during installation. Do not force parts into place.

If problems persist, refer to your vacuum cleaner's original manual or contact ConvOw customer support.

Specifications

Model Compatibility: Xiaomi Mijia K10 PRO Robot Handheld Vacuum Cleaner

Brand: ConvOw

Warranty and Support

For warranty information or customer support regarding ConvOw replacement parts, please refer to the retailer's return policy or contact ConvOw directly through their official channels.

Return Policy: This product is subject to a 30-day refund/replacement policy from the date of purchase. Please retain your proof of purchase.