CorLiving Celeste Modern Fabric Upholstered King Bed Frame Instruction Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Remove all packaging materials before use.
• Keep away from fire sources.
• This product contains foam that could cause suffocation if ingested or inhaled. Keep away from children.
• Assembly requires two adults. Do not attempt to assemble alone.
• Ensure all connections are secure before use. Periodically check and re-tighten hardware.
• Do not stand or jump on the bed frame.
• A box spring and mattress are required and sold separately.

2. Product Overview

The CorLiving Celeste King Bed Frame features a modern design with soft fabric upholstery and a padded headboard, providing both style and comfort for your bedroom. This frame is designed for use with a standard king-sized mattress and requires a box spring.

Image: Fully assembled CorLiving Celeste King Bed Frame in blue, shown with mattress and bedding.

3. Included Components

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Headboard
• Side Rails (2)
• Footboard
• Center Support Beam
• Slats (4)
• Support Legs for Slats
• Hardware Pack (bolts, washers, nuts, Allen key)
• Installation Manual (this document)

Note: All smaller components and hardware are typically stored within a zippered compartment on the back of the headboard or footboard.

4. Assembly Instructions

Assembly requires two people. Lay out all components on a soft, clean surface to prevent scratching. Do not fully tighten bolts until all components are loosely assembled.

Step 1: Attach Side Rails to Headboard and Footboard

Align the side rails with the pre-drilled holes on the headboard and footboard. Secure them using the provided bolts and washers. Hand-tighten only for now.

Image: Bed frame components including headboard, side rails, and footboard, ready for initial assembly.

Step 2: Install Center Support Beam

Place the center support beam along the middle of the frame. Attach it to the headboard and footboard using the designated hardware. Ensure it is centered and level.

Image: Front view of the bed frame structure, illustrating the connection points for the center support beam.

Step 3: Place Slats and Support Legs

Distribute the four slats evenly across the width of the bed frame, resting them on the side rails and center support beam. Attach the support legs to the slats as indicated in the diagram, ensuring they are firmly in place and provide adequate support.

Image: Side view of the bed frame with slats and their support legs installed, ready for a box spring.

Step 4: Final Tightening

Once all components are in place, use the provided Allen key to fully tighten all bolts. Do not overtighten. Ensure the frame is stable and level.

5. Operating Instructions

After assembly, place your box spring directly onto the installed slats. Then, position your king-sized mattress on top of the box spring. The padded headboard provides comfortable back support for reading or relaxing in bed.

6. Maintenance and Care

To maintain the appearance and longevity of your bed frame, follow these care instructions:

• Cleaning: Spot clean the fabric upholstery with a mild detergent and a damp cloth. Do not use harsh chemicals or abrasive cleaners. Test any cleaning solution on an inconspicuous area first.
• Dusting: Regularly dust the frame with a soft, dry cloth.
• Hardware: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fabric fading.

7. Troubleshooting

• Issue: The bed frame feels wobbly or unstable.

  Solution: Ensure all bolts are fully tightened. Check that the center support beam and all slat support legs are properly installed and making firm contact with the floor. Verify that the bed frame is on a level surface.

• Issue: Squeaking noises.

  Solution: Squeaking can often be resolved by re-tightening all hardware. If the issue persists, check for any friction points between metal or wood components and apply a small amount of lubricant (e.g., silicone spray) if safe for the materials, or place felt pads between contact points.
• Issue: Mattress slides on the frame.

  Solution: Ensure a box spring is used as required. If the mattress still slides, consider placing a non-slip mat between the box spring and the mattress.

8. Specifications

Image: Dimensional drawing of the CorLiving Celeste King Bed Frame, showing key measurements in inches and centimeters.

9. Warranty and Customer Support

Warranty: This product comes with a 6-month warranty against manufacturer defects.

Customer Support: For assistance with assembly, missing parts, or warranty claims, please contact CorLiving customer support at: support@corliving.com

Please have your model number (BCF-103-K) and proof of purchase ready when contacting support.