Introduction
Thank you for choosing the EMOS EMILY Rechargeable LED Desk Lamp. This manual provides essential information for the safe and efficient use of your new lamp. The EMILY lamp features a flexible gooseneck, continuous dimming, and a built-in rechargeable battery, making it ideal for various applications.
Image: The EMOS EMILY LED Desk Lamp in white, featuring a square base and lamp head connected by a flexible gooseneck.
Setup
- Unpack the Lamp: Carefully remove the lamp and all accessories from the packaging. Ensure all components listed in the specifications are present.
- Initial Charge: Before first use, fully charge the lamp. Connect the supplied 1-meter USB charging cable to the lamp's charging port and to a suitable USB power adapter (not included). The charging indicator light will show the charging status.
Image: Close-up of the lamp's base showing the ON/OFF slide switch and the DC 5V charging port, with a charging cable being inserted.
- Activate the Lamp: Locate the slide switch on the back of the lamp's base. Slide it from the "OFF" position to the "ON" position to enable the lamp's functions.
Operating Instructions
- Power On/Off: With the lamp activated (switch in "ON" position), lightly touch the touch button located on the lamp's base to turn the light on or off.
- Adjust Brightness (Dimming): To adjust the light intensity, press and hold the touch button. The brightness will continuously cycle between 10% and 100%. Release the button when the desired brightness is reached.
- Positioning the Lamp: The lamp features a flexible gooseneck. Bend and rotate the gooseneck to direct the light precisely where needed.
Image: Three EMOS EMILY lamps shown from different angles, highlighting the flexibility of their gooseneck arms.
Maintenance
- Cleaning: Disconnect the lamp from any power source before cleaning. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners or solvents.
- Storage: If storing the lamp for an extended period, ensure it is fully charged and then turn the slide switch to the "OFF" position. Store in a cool, dry place.
- Battery Care: To prolong battery life, avoid completely discharging the battery frequently. Recharge the lamp when the light output noticeably diminishes.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is discharged. Power switch is OFF. Touch button not responding. | Charge the lamp. Slide the power switch to "ON". Ensure the touch button is clean and try again. |
| Light is dim or flickers. | Low battery. Dimming setting is too low. | Recharge the lamp fully. Press and hold the touch button to increase brightness. |
| Lamp does not charge. | USB cable or adapter faulty. Charging port obstructed. | Try a different USB cable and adapter. Check the charging port for debris. |
Specifications
- Model Number: Z7627
- Brand: EMOS
- Power: 2 W
- Luminous Flux: Max 100 lm
- Color Temperature: 5000 Kelvin (Neutral White)
- Dimming: Continuous (10-100%)
- Battery Life: Up to 96 hours (depending on brightness setting)
- Battery Type: 1 Lithium-Ion battery (included)
- Charging: USB (1m cable included, adapter not included)
- Material: Plastic
- Product Dimensions: 8 x 8 x 30 cm (approx. 3.15 x 3.15 x 11.8 inches)
- Weight: 340 grams (approx. 0.75 lbs)
- Components Included: 1 Desk Lamp, 1 USB Charging Cable
Image: Technical drawing illustrating the dimensions of the EMOS EMILY LED Desk Lamp, including height, base diameter, and lamp head size.
Warranty Information
Specific warranty details for the EMOS EMILY LED Desk Lamp may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed information regarding warranty coverage and terms.
Customer Support
For further assistance, technical support, or inquiries regarding your EMOS EMILY LED Desk Lamp, please contact the retailer from whom you purchased the product. You may also visit the official EMOS website for general product information and support resources.
