1. Introduction
Thank you for choosing the Devoko Electric Sit-Stand Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference.
2. Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not overload the desk. Refer to the specifications for maximum weight capacity.
- Ensure there are no obstructions above or below the desk during height adjustment.
- Disconnect power before cleaning or performing any maintenance.
- Use only the provided power adapter.
- The anti-collision system is designed to prevent damage, but always exercise caution during movement.
3. Package Contents
Verify that all the following components are included in your package:
- Desktop Panels (4 sections)
- Desk Legs (2)
- Feet (2)
- Control Panel with Type-C Port
- Motor and Control Box
- Cable Management Tray
- Power Adapter and Cable
- Assembly Hardware (screws, Allen keys, etc.)
- Cable Hooks (2)
- Optional Swivel Casters (4)
4. Assembly Instructions
Assembly typically requires two people. Follow the numbered steps in the provided assembly guide. An electric screwdriver is recommended for faster assembly.
4.1. Frame Assembly
- Attach the desk legs to the crossbar using the provided screws.
- Secure the feet to the bottom of the desk legs.
- Install the motor and control box onto the frame.
4.2. Desktop Installation
- Carefully place the desktop panels onto the assembled frame. Ensure proper alignment.
- Secure the desktop panels to the frame using the designated screws.
4.3. Control Panel and Cable Management
- Mount the control panel to the underside of the desktop in a convenient location.
- Connect the control panel and motor to the control box.
- Install the cable management tray and cable hooks to organize power cords and other cables.
- Connect the power adapter to the control box and then to a power outlet.
Image: Fully assembled Devoko Electric Sit-Stand Desk, showcasing its design and components.
Image: Close-up of the cable management tray installed under the desk, showing organized cables.
5. Operating Instructions
5.1. Height Adjustment
Use the UP (▲) and DOWN (▼) buttons on the control panel to adjust the desk height. The current height is displayed on the LED screen.
- Press and hold ▲ to raise the desk.
- Press and hold ▼ to lower the desk.
5.2. Memory Presets
The desk features three programmable memory height settings (1, 2, 3).
- Adjust the desk to your desired height using the UP/DOWN buttons.
- Press the "S" button (Set). The LED display will show "S-".
- Within 3 seconds, press the desired memory button (1, 2, or 3). The current height will be saved to that preset.
- To move the desk to a saved height, simply press the corresponding memory button (1, 2, or 3). The desk will automatically adjust to the stored position.
5.3. Integrated Type-C Charging
The control panel includes a Type-C charging port. Connect your compatible devices (e.g., smartphones, tablets) to this port for convenient charging directly from your desk.
Image: Close-up of the smart control panel, highlighting the Type-C charging port, LED display, and memory buttons.
Image: Two individuals using Devoko desks, one sitting at minimum height (72cm) and one standing at maximum height (118cm), illustrating the flexible height range.
6. Maintenance
- Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
- Cable Management: Keep cables organized to prevent entanglement and damage during height adjustments.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; Motor cable disconnected; Overload. | Check all cable connections; Reduce weight on the desk; Reset the system (unplug for 30 seconds, then plug back in). |
| Desk moves unevenly or makes unusual noise. | Loose connections; Obstruction; Uneven weight distribution. | Check and tighten all screws; Remove any obstructions; Redistribute weight evenly. |
| Anti-collision system triggers frequently. | Sensitivity too high; Obstructions. | Ensure no objects are in the path of movement; Consult the full manual for anti-collision sensitivity adjustment if available. |
If problems persist, please contact Devoko customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Devoko |
| Model Number | 0428-1422 |
| Color | White |
| Product Dimensions (L x W x H) | 140 x 80 x 72-118 cm |
| Material | Metal frame, Wood top |
| Item Weight | 26.4 Kilograms |
| Height Adjustment Range | 72 cm to 118 cm |
| Lifting Speed | 20 mm/sec |
| Noise Level | Below 45 dB |
| Dynamic Weight Capacity | 70 kg |
| Static Weight Capacity | 80 kg |
| Special Features | Electric height adjustment, Type-C charging port, 3 memory presets, Anti-collision system |
Image: Detailed product dimensions, including desktop size (140x80cm), height range (72-118cm), and leg dimensions.
Image: Illustration of the desk's robust metal frame, highlighting the 80kg maximum load capacity and durable SPCC steel construction.
9. Warranty and Support
The Devoko Electric Sit-Stand Desk comes with a 5-year warranty. For warranty claims, technical support, or any questions regarding your product, please contact Devoko customer service through the retailer where you purchased the desk or visit the official Devoko website.
Please have your model number (0428-1422) and purchase date ready when contacting support.
