1. Overview
The XYGStudy LC29H Series Dual-Band GPS Module is a high-precision GNSS expansion board designed for compatibility with Raspberry Pi series boards and Jetson Nano. It utilizes advanced L1+L5 dual-band positioning technology and supports multi-GNSS signals to provide accurate and reliable location data. This module is ideal for applications requiring centimeter-level positioning accuracy, such as real-time tracking systems and smart agricultural machinery.

Figure 1: XYGStudy LC29H Dual-Band GPS Module
2. Package Contents
Verify that all items listed below are included in your package:
- LC29H(AA) GPS HAT x1
- 2x20PIN female header x1
- GPS External Antenna (D) x1
- IPEX 1 to SMA cable ~17cm x1
- Screws pack x1

Figure 2: Included components: (1) LC29H(AA) GPS HAT, (2) 2x20PIN female header, (3) GPS External Antenna (D), (4) IPEX 1 to SMA cable, (5) Screws pack.
3. Key Features
- Dual-Band L1+L5 Positioning: Tracks L1+L5 dual-frequency and multi-GNSS signals, significantly reducing multipath effects in urban environments and improving positioning accuracy.
- High Sensitivity & Anti-Interference: Features a built-in Low Noise Amplifier (LNA) and Surface Acoustic Wave (SAW) filter for enhanced sensitivity and strong anti-interference capabilities.
- Centimeter-Level Accuracy: Adopts dual-band positioning and RTK technology to achieve high-precision positioning, suitable for demanding applications.
- Wide Compatibility: Equipped with a standard Raspberry Pi 40PIN GPIO extension header, supporting Raspberry Pi series boards and Jetson Nano.
- Multi-GNSS Support: Concurrent reception of GPS, BDS, GLONASS, Galileo, and QZSS systems while maintaining low power consumption.
- Assisted GNSS (A-GNSS): Reduces Time To First Fix (TTFF) with cold start when powered on to 5 seconds.
- Onboard Battery Holder: Supports ML1220 rechargeable cell for preserving ephemeris information and hot starts.
- LED Indicators: Four onboard LEDs provide module operating status.
4. Setup and Installation
4.1 Hardware Connection
- Attach the LC29H HAT: Carefully align the 2x20PIN female header of the LC29H GPS HAT with the GPIO pins on your Raspberry Pi or Jetson Nano board. Gently press down to ensure a secure connection.
- Connect the External Antenna: Connect the IPEX 1 to SMA cable to the IPEX connector on the LC29H module. Then, attach the GPS External Antenna (D) to the SMA connector of the cable. Position the antenna in an area with a clear view of the sky for optimal signal reception.
- Secure the Module (Optional): Use the provided screws to secure the LC29H HAT to your host board if mounting holes are available and desired.

Figure 3: LC29H GPS HAT connected to a Raspberry Pi board. The module is compatible with various Raspberry Pi models and Jetson Nano.
4.2 Component Identification and Pinout
Refer to the diagram below for identification of key components and the pinout definition of the LC29H module.

Figure 4: Detailed view of the LC29H module showing component layout, pin definitions, and outline dimensions. This includes the LC29H module, 3.3V LDO chip, GPS UART chip, Raspberry Pi 40PIN GPIO header, UART selection jumper, IPEX 1 connector, Micro USB interface, RT9193-33PR, RESET button, Status Indicators (PWR, PPS, FIX), NDKC7020, and ML1220 Battery holder.
Key Components:
- LC29H module: The core GNSS receiver.
- 3.3V LDO chip: Voltage regulator.
- GPS UART chip: Manages serial communication.
- Raspberry Pi 40PIN GPIO header: For connecting to host boards.
- UART selection jumper: Configures UART communication.
- IPEX 1 connector: For external antenna connection.
- Micro USB interface: For power or data (depending on model variant).
- Status Indicators: LEDs for Power (PWR), Pulse Per Second (PPS), and Fix status.
Pinout Definition:
- 5V: 5V power input.
- GND: Ground.
- RXD: LC29H UART RX (connect to host TX).
- TXD: LC29H UART TX (connect to host RX).
- SDA: LC29H I2C SDA pin.
- SCL: LC29H I2C SCL pin.
- WAKEUP: LC29H WAKEUP pin.
- PPS: LC29H PPS pin (Pulse Per Second output).
- WI/RES: LC29H WI/RES pin.
4.3 Software Configuration
The LC29H module typically communicates via UART or I2C. For Raspberry Pi and Jetson Nano, you will need to configure the serial port and install necessary libraries or drivers. Refer to the official documentation or resources provided by XYGStudy for specific software setup instructions, including Python examples for Raspberry Pi/Jetson Nano.
The module operates under Linux operating systems. Ensure your host device's OS is properly configured for serial communication.
5. Operation
5.1 Initial Power-Up and Signal Acquisition
Once the module is connected and the host device is powered on, the LC29H will begin searching for GNSS signals. The onboard LED indicators will provide status feedback:
- PWR LED: Indicates power supply status.
- PPS LED: Flashes when a valid GPS fix is acquired, indicating a Pulse Per Second signal.
- FIX LED: Illuminates steadily when a 3D fix is achieved.
For optimal performance, ensure the external antenna has an unobstructed view of the sky. The module supports Assisted GNSS (A-GNSS) to reduce the Time To First Fix (TTFF), especially during cold starts.
5.2 Dual-Band L1+L5 Positioning
The LC29H module utilizes L1+L5 dual-band satellite signals. This technology significantly enhances positioning accuracy and reliability, particularly in challenging environments like urban canyons where multipath effects are common.

Figure 5: Illustration of dual-band L1+L5 positioning, showing how signals from different frequencies improve accuracy by reducing multipath interference.
5.3 Multi-GNSS System Reception
The module supports concurrent reception of signals from multiple Global Navigation Satellite Systems (GNSS), including GPS, BDS (BeiDou), GLONASS, Galileo, and QZSS. This multi-system capability improves signal availability and positioning robustness.

Figure 6: Diagram illustrating the concurrent reception of signals from multiple GNSS constellations (GPS, BDS, GLONASS, Galileo, QZSS) for enhanced positioning.
5.4 RTK Technology for Centimeter-Level Accuracy
For applications requiring centimeter-level precision, the LC29H module integrates RTK (Real-Time Kinematic) technology. This requires a base station providing correction data to the module. Consult the specific documentation for RTK setup and configuration.
6. Specifications
The following table details the technical specifications of the LC29H Dual-Band GPS Module:

Figure 7: Detailed specifications table for LC29H(AA), LC29H(DA), LC29H(BS) GPS/RTK HAT models, including supported GNSS, frequency bands, accuracy, update rates, time to first fix, sensitivity, and communication interfaces.
| Attribute | Value |
|---|---|
| Brand | XYGStudy |
| Model Name | LC29H |
| Part Number | LC29H(AA) GPS HAT |
| Connectivity Technology | GPIO |
| Operating System | Linux |
| Compatible Devices | Raspberry Pi, Jetson Nano |
| Processor Brand | ARM |
| RAM Memory Technology | LPDDR4 |
| UPC | 719704484602 |
7. Maintenance
The LC29H GPS Module is designed for reliable operation with minimal maintenance. Follow these general guidelines to ensure its longevity:
- Keep Dry: Protect the module from moisture and liquids.
- Cleanliness: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning if necessary.
- Temperature: Operate and store the module within its specified operating temperature range (-40°C to 85°C) to prevent damage.
- Antenna Care: Ensure the external antenna cable is not kinked or damaged. Position the antenna securely.
8. Troubleshooting
If you encounter issues with your LC29H GPS Module, consider the following troubleshooting steps:
- No GPS Fix:
- Ensure the external antenna is securely connected and has a clear, unobstructed view of the sky.
- Verify that the module is receiving power (check PWR LED).
- Check software configuration to ensure the correct serial port or I2C address is being used and data is being read.
- Allow sufficient time for a cold start (up to 26 seconds, see specifications).
- Low Positioning Accuracy:
- Relocate the antenna to an area with better sky visibility, away from tall buildings or dense foliage.
- Ensure the module is receiving dual-band L1+L5 signals.
- If using RTK, verify the base station connection and correction data integrity.
- Check for potential sources of electromagnetic interference near the module or antenna.
- Communication Issues:
- Verify all GPIO connections between the module and the host board are correct and secure.
- Check UART/I2C settings (baud rate, parity, stop bits) in your software.
- Ensure the UART selection jumper is correctly set for your desired communication method.
- Module Not Powering On:
- Confirm the host board (Raspberry Pi/Jetson Nano) is powered on.
- Check the power supply to the host board.
- Inspect the LC29H HAT for any visible damage.
9. Warranty and Support
9.1 Warranty Information
The XYGStudy LC29H Dual-Band GPS Module comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Please retain your proof of purchase for warranty claims.
9.2 Technical Support
For technical assistance, additional resources, or to report issues, please contact XYGStudy customer support. You may find further documentation, drivers, and example code on the official XYGStudy website or by contacting the seller directly through the platform where the product was purchased.
When contacting support, please provide your product model (LC29H(AA) GPS HAT), purchase date, and a detailed description of the issue.