1. Product Overview
This ALLIMITY replacement remote control is designed to provide full functionality for various ElectriQ LCD LED TV models. It serves as a direct replacement, replicating all functions of your original remote without requiring any complex programming.
Figure 1: Front view of the ALLIMITY Replacement Remote Control. This image displays the full layout of the remote, including all buttons for power, source, navigation, volume, channel, and numerical input.
Compatible Models:
- eiQ-32HDT2SM
- eiQ-CV65UHDT2SM
- eiQ-CV49UHDT2SMH
- eiQ-43UHDT2SMH
- eiQ-50UHDT2SMH
- eiQ-55UHDT2SMH
- eiQ-58UHDT2SMH
- eiQ-65UHDT2SMH
- eiQ-CV55UHDT2SMH
- eiQ-CV65UHDT2SMH
- eiQ-75UHDT2SMH
- eiQ-43UHDT2SMH-V3
- eiQ-65UHDT2SM-V2
- eiQ-75UHDT2SMH-V2
- eiQ-CV49UHDT2SM
- eiQ-CV55UHDT2SM
- eiQ-50UHDT2SMH-V2
- eiQ-55UHDT2SMH-V2
2. Setup
2.1 Battery Installation
The remote control operates on alkaline batteries. No programming is required for initial setup.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open the compartment.
- Insert two new AAA alkaline batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.
Once batteries are inserted, the remote is ready for immediate use with compatible ElectriQ TV models.
3. Operating Instructions
This section details the primary functions of the remote control buttons. Refer to Figure 1 for the button layout.
3.1 Key Functions
| Button Name | Function |
|---|---|
| STANDBY (Red Button) | Turns the TV on or off (standby mode). |
| SOURCE | Selects the input source (e.g., HDMI, AV, TV). |
| P.MODE (Picture Mode) | Cycles through picture presets (e.g., Standard, Dynamic, Movie). |
| S.MODE (Sound Mode) | Cycles through sound presets (e.g., Standard, Music, Movie). |
| FREEZE | Pauses the current image on screen. |
| TXT (Teletext) | Activates or deactivates Teletext. |
| ZOOM | Adjusts the screen zoom level. |
| FAV.LIST (Favorite List) | Accesses your list of favorite channels. |
| SUBTITLE | Toggles subtitles on or off. |
| AUDIO | Selects audio language or mode. |
| MIX | Mixes Teletext with TV picture. |
| SIZE | Adjusts the display size in Teletext mode. |
| CANCEL | Cancels an operation or exits a menu. |
| REVEAL | Reveals hidden text in Teletext mode. |
| SUBPAGE | Navigates to subpages in Teletext mode. |
| INDEX | Accesses the Teletext index page. |
| HOLD | Holds the current Teletext page. |
| MENU | Opens or closes the main menu. |
| EXIT | Exits the current menu or function. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| ENTER | Confirms a selection or enters a menu. |
| PLAY/PAUSE | Plays or pauses media playback. |
| STOP | Stops media playback. |
| VOL +/- (Volume) | Increases or decreases the volume level. |
| MUTE | Mutes or unmutes the TV sound. |
| TV/RADIO | Switches between TV and Radio modes. |
| CH +/- (Channel) | Changes the TV channel up or down. |
| Number Buttons (0-9) | Directly selects channels or inputs numerical data. |
| DISPLAY | Displays current channel information or on-screen display. |
| RECALL | Switches between the current and previously viewed channel. |
4. Maintenance
4.1 Cleaning the Remote Control
To maintain the remote control's appearance and functionality, clean it regularly.
- Use a soft, dry cloth to wipe the surface of the remote.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the remote's finish or internal components.
- Do not allow liquids to enter the remote control.
4.2 Battery Replacement
Replace batteries when the remote control's range decreases or it becomes unresponsive. Refer to Section 2.1 for battery installation instructions.
- Always replace both batteries at the same time.
- Use new alkaline batteries of the specified type (AAA).
- Dispose of used batteries responsibly according to local regulations.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
5. Troubleshooting
If you experience issues with your remote control, try the following troubleshooting steps:
| Problem | Possible Solution |
|---|---|
| Remote is not responding. |
|
| Remote has limited range. |
|
| Certain buttons do not work. |
|
If the problem persists after trying these steps, please contact the manufacturer or seller for further assistance.
6. Specifications
- Brand: ALLIMITY
- Model Number: QYSY-EIQ-CV49UHDT2SMH-QYSY
- Compatible Devices: ElectriQ LCD LED TVs (specific models listed in Section 1)
- Number of Supported Devices: 18 (referring to the number of compatible TV models)
- Number of Buttons: 30
- Controller Type: Remote Control
- Maximum Range: 10 Meters
- Battery Description: Alkaline
- Power Source: Batteries (AAA, not included)
7. Warranty and Support
This product is typically covered by the seller's return policy, which allows for returns or replacements within a specified period (e.g., 30 days from purchase). For specific warranty details or technical support, please refer to the information provided by your retailer or contact the manufacturer, ALLIMITY, directly.
Please retain your proof of purchase for any warranty claims or support inquiries.