Sunrosa MC36315 Medicine Cabinet with Mirror - Installation and User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sunrosa Tempered Glass Mirror Medicine Cabinet (Model MC36315). Please read this manual thoroughly before beginning installation or use to ensure safe and correct operation. This cabinet features a durable tempered glass mirror, two asymmetrical doors, and can be installed as either a wall-mounted or recessed unit.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or product damage.

• Potential Pinch Points: Exercise caution when opening and closing cabinet doors to avoid pinching fingers.
• Proper Mounting Techniques: Always use appropriate mounting hardware and techniques for your wall type. Ensure the cabinet is securely fastened to wall studs or suitable anchors.
• Use Safety Gear: Wear appropriate safety gear, such as gloves and eye protection, during installation.
• Load Limits: Do not exceed the recommended load capacity for shelves or the cabinet. Overloading can cause instability or damage.
• Avoid Misuse: Do not hang from the cabinet or use it for purposes other than its intended storage function to prevent damage or injury.
• Two-Person Installation: Due to the weight and size of the cabinet (approximately 44 pounds), a two-person installation is highly recommended to prevent injury and ensure proper mounting.

3. Package Contents

Verify that all components are present before beginning installation:

• Tempered glass mirror medicine cabinet (1 unit)
• Adjustable tempered glass shelves (2 units)
• Side panels (for surface mount installation)
• Installation hardware (screws, wall plugs, shelf support pegs)
• Installation instruction manual (this document)

4. Specifications

5. Installation Guide

Before starting, ensure you have the necessary tools: a pencil, level, drill (with 6mm bit), screwdriver, and hammer. It is highly recommended that two people perform the installation due to the cabinet's weight.

5.1. Wall-Mounted Installation

1. Determine Position: Confirm the desired installation position on the wall. Use a level to ensure accuracy and mark the hole locations for the bottom support with a pencil.
2. Drill Holes: Using a 6mm drill bit, drill holes at the marked locations.
3. Insert Wall Plugs: Insert the provided wall plugs into the drilled holes. Gently tap with a hammer if needed to ensure they are flush with the wall surface.
4. Secure Bottom Support: Secure the bottom support to the wall using the ST4*35 screws. Ensure the screws are tightly fastened to prevent instability.
5. Attach Cabinet: Carefully attach the medicine cabinet to the bottom support, ensuring it is securely engaged.
6. Mark Top Brackets: Place the top brackets on the top of the medicine cabinet, ensuring they are securely engaged. Use a pencil to mark the hole locations for these top brackets.
7. Drill and Secure Top Brackets: Remove the cabinet, drill holes, insert wall plugs, and secure the top brackets with ST4*35 screws.
8. Final Cabinet Mounting: Re-attach the cabinet, securing it to both the bottom support and the top brackets.
9. Install Side Panels: For surface mount, place the side panels onto the cabinet.

Image: Sunrosa medicine cabinet in a surface mount configuration, with doors open revealing interior storage.

5.2. Recessed Installation

For recessed installation, you will need to create an opening in your wall. The required wall opening dimensions are determined by subtracting 5/8" from both the width and height of the cabinet, and ensuring a depth of at least 3 3/4".

1. Prepare Wall Opening: Based on the cabinet dimensions, subtract 5/8" from the width and height to determine the required wall opening size. Mark this area on your wall using a level and pencil, then carefully cut the opening. Ensure the depth of the recess is at least 3 3/4 inches.
2. Remove Hardware: First, remove any hardware used for installing the side panels if they were previously attached for wall-mounted installation.
3. Place Cabinet: Carefully place the medicine cabinet into the recessed wall space.
4. Mark Hole Locations: Use a pencil to mark the hole locations on both sides of the cabinet where it meets the wall studs or framing.
5. Drill Holes: Remove the cabinet, and using a 6mm drill bit, drill holes at the marked locations within the recessed area.
6. Insert Wall Plugs: Insert the provided wall plugs into the drilled holes.
7. Secure Cabinet: Place the cabinet back into the recess and secure it to the wall using the ST4*35 screws. Ensure all screws are tightly fastened.

Image: Sunrosa medicine cabinet in a recessed mount configuration, with doors open revealing interior storage.

5.3. Shelf Installation

1. Insert Shelf Support Pegs: Insert the shelf support pegs into the desired holes inside the cabinet. The shelves are adjustable, allowing you to customize the storage space.
2. Place Shelves: Carefully place the tempered glass shelves onto the support pegs. Ensure they are level and stable.

5.4. Installation Video

6. Operation

Your Sunrosa medicine cabinet is designed for ease of use and durability.

• Door Operation: The cabinet features BLUM soft-closing hinges, which ensure quiet and gentle door closure, preventing slamming and enhancing safety.
• Adjustable Shelves: The two tempered glass shelves can be adjusted to different heights to accommodate various items. Simply remove the shelves, reposition the support pegs, and place the shelves back.
• Mirrored Interior: The interior of the cabinet and the inside of the doors are also mirrored, providing additional reflective surfaces for convenience.

7. Maintenance

To keep your medicine cabinet in optimal condition, follow these maintenance guidelines:

• Cleaning Mirrors: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the mirror surfaces. Avoid spraying cleaner directly onto the mirror; instead, apply it to the cloth first.
• Cleaning Frame and Shelves: Wipe the anodized aluminum frame and glass shelves with a damp cloth and mild soap, then dry thoroughly with a soft cloth. Avoid harsh chemicals or abrasive cleaners.
• Hinge Care: Periodically check the hinges for any loose screws and tighten them if necessary. Avoid applying excessive force to the doors.
• Avoid Excessive Moisture: While designed for bathroom environments, avoid prolonged exposure to excessive moisture or direct water spray to maintain the cabinet's integrity.

8. Troubleshooting

8.1. Hinge Adjustment for Door Alignment

If your cabinet doors do not close perfectly or leave a gap, you may need to adjust the hinges. The BLUM hinges allow for fine-tuning of door position.

1. Doors Not Closing Perfectly (Stacked): If two mirror doors stack on top of each other when closed, locate the hinge and open its cover. Adjust the outward side screw appropriately. Turning the screw will move the door horizontally.
2. Doors Not Staying Closed (Gap): If the doors cannot stay closed and always leave a gap, locate the hinge and open its cover. Adjust the inward side screw appropriately. Turning this screw will move the door horizontally, allowing it to close flush.

9. Warranty and Support

Sunrosa is committed to customer satisfaction.

• Guarantee: If you are not completely satisfied with your product or receive a defective item, please do not hesitate to contact us. We are always happy to resolve any issues.
• Returns: This product is eligible for 30-day easy returns.
• Customer Support: For any questions or concerns, please contact Sunrosa customer support.