EGO Power+ SNT2416 24-Inch 2-Stage Electric Snow Blower Instruction Manual

Important Safety Information

This snow blower is a powerful, heavy-duty machine. Always read and follow the manufacturer's instructions before operating. Be aware of potential hazards such as injury from rotating parts and carbon monoxide poisoning from gasoline models. Use protective equipment such as gloves and eye protection. Follow specific handling and storage requirements for the snow blower and its fuel.

1. Product Overview

The EGO POWER+ SNT2416 24-inch Self-Propelled 2-Stage XP Snow Blower with Peak Power™ delivers exceptional performance for snow removal. This cordless snow blower operates without the noise, fuss, and fumes associated with gas-powered models. It is designed to handle tough snow conditions, including what snowplows leave behind, and can throw snow up to 50 feet.

Key Features:

• Powerful Snow Throwing: Peak Power technology combines two EGO ARC Lithium batteries to throw snow up to 50 feet.
• Efficient Clearing: Features a 24-inch clearing width and 20-inch intake height, capable of handling deep snow.
• Extended Runtime: Clears up to a 24-car driveway with 8 inches of snow on a single charge using the two included 10.0Ah ARC Lithium batteries. Compatible with all EGO 56V ARC Lithium batteries.
• Self-Propelled with Trigger Steering: Variable-speed self-propelled forward and reverse directions with trigger-controlled steering for enhanced maneuverability.
• 2-in-1 Remote Chute Adjustment: Adjustment lever provides 200-degree chute rotation and deflection control.
• Heated Handle Grips: Keeps hands warm in cold conditions.
• LED Lights: Four LED lights for improved visibility during early morning or evening operation.

Figure 1: The EGO Power+ SNT2416 24-Inch 2-Stage Electric Snow Blower with included batteries and charger.

2. Setup and Assembly

The EGO Power+ SNT2416 is designed for quick and easy assembly, often requiring no tools for major components.

2.1. Initial Assembly

Refer to the detailed instructions in your product manual for specific assembly steps. Typically, this involves attaching the handle assembly and the discharge chute.

2.2. Battery Installation and Charging

The snow blower requires two EGO 56V ARC Lithium batteries for operation. It is recommended to use 5.0Ah batteries or higher for optimal performance and runtime.

1. Open the battery compartment cover.
2. Insert two charged EGO 56V ARC Lithium batteries into the designated slots until they click securely into place.
3. Close the battery compartment cover.

Use the included dual-port charger to charge your batteries. A full charge for two 10.0Ah batteries typically takes approximately 1 hour and 15-20 minutes.

Figure 2: The EGO Power+ dual port charger with two 10.0Ah ARC Lithium batteries.

Figure 3: EGO Power+ SNT2416 with the battery compartment open, showing two 56V ARC Lithium batteries installed.

3. Operating Instructions

3.1. Controls Overview

The control panel on the handle provides easy access to all operating functions:

• Power Button: Activates the snow blower.
• Drive Speed Control: Adjusts the self-propelled speed (High, Low, Reverse).
• Auger Power Control: Adjusts the auger speed (Eco, Turbo) for varying snow conditions.
• Chute Direction Control: Lever to rotate the discharge chute 200 degrees.
• Chute Deflection Control: Lever to adjust the angle of snow discharge.
• Heated Grip Button: Activates the heated handle grips.
• LED Light Button: Turns the front LED lights on/off.

Figure 4: Detailed view of the EGO Power+ SNT2416 control dashboard.

3.2. Starting the Snow Blower

1. Ensure batteries are installed and charged.
2. Press the main power button. The indicator light will illuminate.
3. Engage the auger by pulling the auger lever towards the handle.
4. Engage the self-propel function by pulling the drive lever towards the handle. Adjust speed as needed.

3.3. Clearing Snow

• Adjust Chute: Use the chute direction and deflection controls to direct snow away from cleared areas, buildings, and people. For maximum throwing distance, adjust the chute to its highest angle.
• Variable Speed Auger: Adjust the auger speed based on snow depth and density. Use 'Eco' for lighter snow and 'Turbo' for heavy, wet snow.
• Self-Propelled Operation: Allow the self-propel function to do most of the work. Use trigger-controlled steering to easily navigate turns.
• Deep Snow: For very deep or heavy snow, it may be necessary to make multiple passes, clearing a portion of the snow depth with each pass.

Figure 5: The EGO Power+ SNT2416 is capable of throwing snow up to 50 feet.

Figure 6: The EGO Power+ SNT2416 can clear a 24-car driveway on a single charge.

3.4. Official Product Videos

4. Maintenance and Storage

4.1. General Maintenance

• After each use, clear any remaining snow or debris from the auger housing and chute.
• Inspect the auger and scraper bar for wear or damage. Replace worn parts as needed.
• Check all fasteners for tightness and tighten if necessary.

4.2. Storage

• Remove the batteries from the snow blower before storing. Store batteries in a cool, dry place.
• Clean the snow blower thoroughly before long-term storage.
• The handle can be folded for compact storage.

5. Troubleshooting

5.1. Common Issues

• Snow Blower Not Starting: Ensure batteries are fully charged and properly inserted. Check that the power button is pressed and safety levers are engaged.
• Reduced Performance: Check for clogs in the auger housing or discharge chute. Ensure auger speed is set appropriately for snow conditions.
• Snow Not Throwing Far: Adjust the chute deflection angle upwards for maximum throwing distance. Clear any blockages.

For more detailed troubleshooting, refer to the full EGO Power+ SNT2416 user manual.

6. Specifications

7. Warranty and Support

For detailed warranty information, product registration, and customer support, please refer to the official EGO Power+ website or the documentation included with your snow blower. Keep your proof of purchase for warranty claims.