1. Introduction
Thank you for choosing the usogood 4K 48MP WiFi Trail Camera. This device is designed for outdoor wildlife monitoring, offering high-resolution images and videos with advanced features like night vision and motion detection. Its robust, waterproof design ensures reliable performance in various environmental conditions.
This manual provides detailed instructions for setting up, operating, and maintaining your trail camera to ensure optimal performance and longevity.
2. What's in the Box
Please check the package contents to ensure all items are present:
- Trail Camera (1 unit)
- Instruction Manual (1 unit)
- Mounting Belt (1 unit)
- USB Cable (1 unit)
- Threaded Tripod and Screw Accessories (1 set)
3. Setup
3.1 Power Source Installation
The usogood TC80 trail camera requires 8x 1.5V AA batteries (not included) or an external 6V/2A DC power supply (not included). For battery installation:
- Open the camera casing.
- Locate the battery compartment.
- Insert 8x AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
Image: Proper battery installation in the camera's compartment.
3.2 Memory Card Insertion
The camera supports a maximum of 64GB SD card (not included). Ensure the SD card is formatted before first use.
- With the camera powered off, open the casing.
- Insert the SD card into the designated slot until it clicks into place.
- Close the camera casing.
3.3 Mounting the Camera
The camera can be mounted using the included mounting belt or threaded tripod accessories. It is designed for tree mounting.
- Tree Mount: Use the provided mounting belt to secure the camera to a tree trunk. Adjust the angle for optimal coverage.
- Tripod Mount: Attach the camera to a standard tripod using the threaded tripod accessory for more precise positioning.
3.4 Wi-Fi Connection and App Control
The camera features Wi-Fi connectivity for easy viewing and downloading of media via a smartphone app. Note that this Wi-Fi is a direct peer-to-peer connection between the camera and your smartphone, not a connection to your home Wi-Fi network. The effective Wi-Fi distance is approximately 20 meters (65 feet).
Image: Steps for connecting the camera to the smartphone app.
- Download App: Download the "Victor Cam" app from your smartphone's app store (Google Play for Android, App Store for iOS).
- Enable Permissions: Ensure Bluetooth, Wi-Fi, and location permissions are enabled on your phone for the app.
- Power On Camera: Install batteries and turn the camera on. You can enter ON or TEST mode.
- Connect via App: Open the "Victor Cam" app and click to connect to the camera.
- Wi-Fi Hotspot: Connect your smartphone to the camera's Wi-Fi hotspot. The Wi-Fi hotspot name (e.g., CAMERA-XXXXX) and default password (12345678) will be displayed on the camera screen.
4. Operation
4.1 Capture Modes
The camera offers three capture modes: Photo, Video, and Photo + Video. These settings can be configured via the camera's internal menu or the smartphone app.
4.2 Image and Video Resolution
The camera records 48MP high-definition pictures and clear 4K video footage. During the day, recordings are in full color, while night recordings are in black and white.
Image: Detail comparison of 48MP image resolution.
Image: Representation of 4K HD video resolution.
4.3 Super Night Vision
Equipped with 36pcs 850nm low-glow IR LEDs, the camera provides clear night vision without overexposing or startling wildlife. This ensures discreet monitoring in dark environments.
Image: Comparison of night vision capabilities.
4.4 Motion Detection and Trigger Speed
The camera features 3 independent PIR motion detectors with a 0.3-second trigger speed and a 120° wide detection angle. The effective detection range is up to 20 meters (65 feet). For specific monitoring areas, you can turn off the side PIR sensors to narrow the shooting area and conserve power.
Image: Demonstration of fast trigger speed.
Image: Illustration of the 120° wide detection angle.
4.5 Data Management
When the memory card is full, the camera will automatically overwrite the oldest files to continue recording, ensuring continuous monitoring without manual intervention.
Image: Overview of additional camera features, including automatic overwriting.
5. Maintenance
5.1 Waterproof Design
The usogood TC80 camera has an IP66 waterproof rating, featuring good sealing material. This allows it to operate normally in rainy or snowy conditions, and within a temperature range of -20℃ to 60℃ (-4°F to 140°F).
Image: The camera's IP66 waterproof capability.
5.2 Cleaning and Storage
- Wipe the camera exterior with a soft, damp cloth. Avoid abrasive cleaners.
- Ensure the lens and PIR sensors are clean for optimal performance.
- When storing for extended periods, remove batteries to prevent leakage.
6. Troubleshooting
6.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Low or dead batteries; incorrect battery polarity; external power issue. | Replace batteries; check battery orientation; verify external power supply (6V/2A). |
| No images/videos captured | PIR sensitivity too low; detection angle obstructed; memory card full or faulty. | Increase PIR sensitivity; clear obstructions; format or replace SD card. |
| Poor night vision quality | IR LEDs obstructed; object too far or too close. | Ensure IR LEDs are clear; adjust camera distance to subject. |
| Wi-Fi connection issues | Out of range; incorrect Wi-Fi password; app permissions. | Move closer to camera (within 20m); re-enter password; check app permissions (Bluetooth, Wi-Fi, Location). Remember, it's a direct connection, not to home Wi-Fi. |
| SD card error/looping | Incompatible SD card adapter (if using microSD); faulty SD card. | Try a different SD card adapter or a full-size SD card; format the SD card. |
6.2 Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact our customer service team. We are committed to resolving your problems within 48 hours.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | TC80 |
| Effective Still Resolution | 48 MP |
| Video Capture Resolution | 4K |
| Frame Rate | 30 frames_per_second |
| Detection Angle | 120° |
| Trigger Speed | 0.3 seconds |
| Detection Range | Up to 20m (65ft) |
| Night Vision | 36pcs 850nm low glow IR LEDs |
| Display | 2.0-inch color LCD screen |
| Connectivity | Supports hotspot WiFi (peer-to-peer, not home network) |
| Power Source | 8x 1.5V AA batteries or external 6V/2A DC power supply |
| Memory Card Support | Up to 64 GB Flash Memory |
| Water Resistance | IP66 |
| Operating Temperature | -20℃ to 60℃ (-4°F to 140°F) |
| Dimensions (L x W x H) | 3.38 x 3.38 x 3.98 inches |
| Weight | 1.46 pounds |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Manufacturer | usogood |
| Country of Origin | China |
8. Warranty and Support
8.1 Product Protection
Your usogood trail camera is covered by a 2-year protection plan, providing repair services within this period. Additionally, a 3-month return policy is in place to ensure your satisfaction with the product quality.
8.2 Customer Service
For any inquiries, technical support, or warranty claims, please contact our dedicated customer service team. We aim to respond and resolve your concerns within 48 hours.
