FLAMA 698FL Dual Basket Air Fryer Instruction Manual

1. Introduction

Thank you for choosing the FLAMA 698FL Dual Basket Air Fryer. This appliance is designed to cook a variety of foods using rapid hot air circulation, offering a healthier alternative to traditional deep frying. Please read this instruction manual thoroughly before first use to ensure safe and optimal operation. Keep this manual for future reference.

Image: The FLAMA 698FL Dual Basket Air Fryer shown in a kitchen setting with cooked chicken and broccoli in its baskets.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plugs, or the main unit in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Ensure the appliance is placed on a stable, heat-resistant surface.
• Do not block any ventilation openings.

3. Product Overview

The FLAMA 698FL features a dual-basket design, allowing you to cook two different foods simultaneously or larger quantities of a single food. Each basket has a 4-liter capacity, totaling 8 liters.

Components

• Main Unit with Control Panel
• Basket 1 (4L capacity)
• Basket 2 (4L capacity)
• Crisper Plate 1
• Crisper Plate 2

Image: Front view of the FLAMA 698FL Dual Basket Air Fryer, showing the digital control panel and the two basket handles.

Image: Angled view of the FLAMA 698FL Dual Basket Air Fryer, highlighting its compact design with both baskets inserted.

Control Panel

The appliance features a touch control panel for easy operation. It includes:

• Power Button: To turn the unit on/off.
• Temperature Controls (+/-): Adjust cooking temperature.
• Time Controls (+/-): Adjust cooking time.
• Basket Selection (1/2): Select which basket to control.
• Preset Functions: Icons for common food types (e.g., fries, chicken, fish, steak, bake, dehydrate).
• SYNC COOK: Synchronizes cooking time and temperature for both baskets to finish simultaneously.
• DUAL ZONE: Allows different cooking settings for each basket.

4. Setup

Unpacking and Initial Cleaning

1. Remove all packaging materials, stickers, and labels from the appliance.
2. Wipe the exterior of the appliance with a damp cloth.
3. Wash the baskets and crisper plates with hot water, dish soap, and a non-abrasive sponge. Rinse thoroughly and dry completely.
4. Ensure all parts are dry before assembly.

Image: The FLAMA 698FL Air Fryer with both baskets and their respective crisper plates removed, ready for cleaning or assembly.

Placement

• Place the air fryer on a stable, level, heat-resistant surface.
• Ensure there is at least 15 cm (6 inches) of clear space around the back and sides of the appliance for proper ventilation.
• Do not place the appliance directly against a wall or under cabinets.

First Use (Pre-heating)

Before cooking food for the first time, it is recommended to run the air fryer for a short cycle to eliminate any manufacturing odors.

1. Insert the crisper plates into the baskets.
2. Insert the baskets into the main unit.
3. Plug the power cord into a grounded wall outlet. The display will illuminate.
4. Press the Power button.
5. Set the temperature to 200°C (390°F) and time to 10 minutes for both baskets.
6. Allow the unit to run. A slight odor may be present; this is normal.
7. Once complete, unplug the unit and let it cool down completely.

Image: A hand demonstrating the proper way to insert the crisper plate into one of the air fryer baskets.

5. Operating Instructions

Basic Operation

1. Place the crisper plate into the basket(s).
2. Place food into the basket(s). Do not overfill.
3. Insert the basket(s) firmly into the main unit.
4. Plug in the appliance. Press the Power button.
5. Select Basket 1 or Basket 2 (or both for DUAL ZONE/SYNC COOK).
6. Adjust the temperature and time using the +/- buttons.
7. Press the Power button again to start cooking.
8. During cooking, you may pull out a basket to shake or flip food. The unit will pause and resume when the basket is reinserted.
9. The unit will beep when cooking is complete. Carefully remove the basket(s) and transfer food.

Image: The FLAMA 698FL Air Fryer with both cooking baskets partially pulled out, showing the interior racks.

Using Dual Baskets (DUAL ZONE / SYNC COOK)

• DUAL ZONE: Allows you to set different temperatures and times for each basket. Select Basket 1, set its parameters, then select Basket 2 and set its parameters. Press Power to start both.
• SYNC COOK: If you want both baskets to finish cooking at the same time, even with different settings, use the SYNC COOK function. Set parameters for Basket 1, then for Basket 2, and press SYNC COOK. The appliance will adjust the start times to ensure simultaneous completion.

Image: Top-down view of the FLAMA 698FL Air Fryer with both baskets completely removed, showing the heating elements and internal structure.

Preset Functions

The control panel features several preset icons for common foods. To use a preset:

1. Select the desired basket (1 or 2).
2. Press the icon corresponding to your food type. The appliance will automatically set a recommended temperature and time.
3. You can adjust the temperature and time manually after selecting a preset if needed.
4. Press Power to start.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your air fryer.

Cleaning the Baskets and Crisper Plates

1. Always unplug the air fryer and allow it to cool completely before cleaning.
2. Remove the baskets and crisper plates.
3. Wash them in hot soapy water using a non-abrasive sponge. For stubborn food residue, soak them in warm water for about 10-15 minutes.
4. Alternatively, the baskets and crisper plates may be top-rack dishwasher safe (consult product specifications for confirmation).
5. Rinse thoroughly and dry completely before reassembling or storing.

Image: A close-up view of the two crisper plates, designed to fit into the air fryer baskets, showing their perforated surface.

Cleaning the Main Unit

• Wipe the exterior of the main unit with a damp cloth. Do not use abrasive cleaners or scouring pads.
• Never immerse the main unit in water or any other liquid.
• Clean the interior of the appliance with a damp cloth after removing the baskets. Ensure no food particles are left behind.

Storage

Ensure the appliance is clean and dry before storing. Store it in a cool, dry place.

7. Troubleshooting

If you encounter issues with your FLAMA 698FL Air Fryer, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

• Brand: FLAMA
• Model Name: 689FL
• Total Capacity: 8 Liters (2 x 4L baskets)
• Power: 3040 Watts
• Control Method: Touch
• Recommended Uses: Roasting, Dehydrating, Baking
• ASIN: B0CHJVJZ2Y

9. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official FLAMA website. Keep your proof of purchase for any warranty claims.

If you require assistance with your FLAMA 698FL Dual Basket Air Fryer, please contact the manufacturer's customer service department.