Brightever HSG-T22 Solar Wall Lights Instruction Manual

1. Introduction

Thank you for choosing Brightever HSG-T22 Solar Wall Lights. These outdoor solar-powered lights are designed to provide efficient and reliable illumination for various outdoor spaces. Featuring a motion sensor, three distinct lighting modes, and a durable waterproof design, they offer enhanced security and convenience without the need for electrical wiring.

Figure 1: Brightever HSG-T22 Solar Wall Lights (6-Pack)

2. Safety Information

Please read all safety instructions carefully before installation and use. Retain this manual for future reference.

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging.
• Do not stare directly into the LED lights when they are illuminated, as this may cause temporary vision impairment.
• Keep the product away from open flames or high temperatures.
• Do not attempt to disassemble or modify the product. Unauthorized modifications may void the warranty and pose safety risks.
• This product is designed for outdoor use only.
• Dispose of batteries according to local regulations.

3. Package Contents

Verify that all components are present and in good condition upon opening the package. The standard package includes:

• Brightever HSG-T22 Solar Wall Lights (quantity as per pack size)
• Mounting Screws
• Wall Plugs
• User Manual

4. Product Features

The Brightever HSG-T22 Solar Wall Lights are equipped with advanced features for optimal performance:

• High-Efficiency Solar Panel: Utilizes monocrystalline silicon solar cells with a conversion rate of up to 20.5% for faster charging.
• Bright LED Illumination: Each light features 178 LEDs, providing ample brightness for outdoor areas.
• Wide Lighting Angle: A 270° lighting angle ensures broad coverage.
• PIR Motion Sensor: Detects motion up to 16 feet (approximately 5 meters) within a 120° sensing angle.
• Three Lighting Modes: Customizable operation to suit different needs (detailed in Section 6).
• Durable Construction: IP65 waterproof, heat-resistant, and frost-resistant design ensures reliable operation in various weather conditions.
• Integrated Battery: Built-in rechargeable Lithium Ion battery for cordless operation.

Figure 2: Wide Lighting Angle and Motion Sensing Range

Figure 3: All-Weather Resistance

5. Setup and Installation

The Brightever HSG-T22 Solar Wall Lights are designed for easy, wire-free installation.

5.1 Pre-Installation Check

1. Unpack: Carefully remove all components from the packaging.
2. Initial Charge: Before first use, place the solar lights in direct sunlight for at least 6-8 hours to ensure the battery is fully charged.
3. Location Selection: Choose an outdoor location where the solar panel can receive maximum direct sunlight throughout the day. Avoid areas under eaves, trees, or other obstructions that might block sunlight.

5.2 Mounting Instructions

1. Mark Drilling Points: Hold the light against the desired mounting surface and mark the positions for the two screw holes.
2. Drill Holes: Use a drill to create holes at the marked positions. For masonry or concrete, insert the provided wall plugs into the drilled holes.
3. Secure the Light: Align the light's mounting holes with the drilled holes (or wall plugs) and secure it firmly with the provided screws.

Figure 4: Solar Charging and Automatic Night Lighting

6. Operating Modes

The Brightever HSG-T22 Solar Wall Lights offer three distinct lighting modes, selectable via a button on the unit. Press the button repeatedly to cycle through the modes.

Figure 5: Three Lighting Modes Explained

1. Mode 1: Stay-on Mode

   The light will automatically turn on at night and remain continuously illuminated throughout the night at a consistent brightness level.

2. Mode 2: Dim Light Mode

   The light will turn on at night with a dim illumination. When motion is detected within its sensing range, the light will brighten to 100% brightness for approximately 15 seconds, then return to dim light.

3. Mode 3: Strong Light Sensing Mode

   The light will remain off at night. It will only turn on to 100% brightness for approximately 15 seconds when motion is detected within its sensing range, then turn off again.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar wall lights.

• Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
• Check Mounting: Occasionally inspect the mounting screws to ensure the light remains securely attached to the wall.
• Battery Care: While the battery is built-in, ensure the light receives adequate sunlight for charging, especially during shorter winter days, to maintain battery health.
• Environmental Factors: In areas with heavy snowfall, clear snow from the solar panel to allow for charging.

8. Troubleshooting

If you encounter issues with your Brightever HSG-T22 Solar Wall Lights, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

Brightever HSG-T22 Solar Wall Lights come with a 1-year seller warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model (HSG-T22) available when contacting support.