Electrastim Em40

Electrastim Kix Em40 User Manual

Model: Em40 | Brand: Electrastim

Introduction

Welcome to the Electrastim Kix Em40 user manual. The Kix Em40 is a compact, user-friendly electro-stimulation device designed for personal use. It features an intuitive color-phase LED display for intensity control, eliminating traditional numerical levels for a smoother, more experimental experience. With its touch-sensitive controls and multiple stimulation patterns, the Kix Em40 offers a versatile and discreet addition to your personal care routine. This manual provides essential information on setup, operation, maintenance, and safety to ensure optimal performance and longevity of your device.

Safety Information

Please read all safety warnings and instructions carefully before using the Electrastim Kix Em40. Failure to do so may result in injury or damage to the device.

  • Do not use if you have a pacemaker, implanted defibrillator, or any other implanted electronic device.
  • Consult a healthcare professional before use if you have any medical conditions, including but not limited to heart conditions, epilepsy, or pregnancy.
  • Do not apply stimulation to the head, neck, or chest area.
  • Keep out of reach of children.
  • Do not use in or near water.
  • Only use the provided accessories and charging cable.
  • Discontinue use immediately if you experience any discomfort, pain, or adverse reactions.
  • This device is for external use only.

Package Contents

Electrastim Kix Em40 product packaging showing the device and its box.

Image: The Electrastim Kix Em40 device and its packaging. The black box features the "ELECTRASTIM" logo, "ELECTRO STIMULATION", and "ELECTRO SEX STIMULATOR" text, with a clear image of the Kix device showing its colorful intensity indicator and control buttons.

Please check the package contents to ensure all items are present:

  • 1 x KIX Stimulator
  • 1 x Stimulator output cable
  • 2 x Self-adhesive electro pads
  • 1 x USB charging cable
  • 1 x Microfibre storage bag
  • 1 x User Instructions (English)
  • 1 x Warranty card

Setup

Charging the Device

  1. Locate the USB charging port on the KIX Stimulator.
  2. Connect the provided USB charging cable to the device and a compatible USB power source (e.g., computer USB port, USB wall adapter).
  3. The LED indicator on the device will show charging status (refer to device for specific indicator behavior, typically a blinking light that becomes solid when fully charged).
  4. A full charge takes approximately [Time, if available, otherwise omit or state "a few hours"]. The device provides approximately 3 hours of continuous play on a full charge, depending on intensity settings.
  5. Disconnect the charging cable once fully charged.

Connecting Electro Pads

  1. Ensure the KIX Stimulator is turned off.
  2. Connect the stimulator output cable to the single output port on the KIX device.
  3. Attach the self-adhesive electro pads to the connectors on the other end of the output cable.
  4. Carefully peel the protective film from the adhesive side of the electro pads.
  5. Apply the pads to clean, dry skin in the desired area. Ensure good contact for effective stimulation.

Operating Instructions

Powering On/Off

  • To turn on: Press and hold the power button (usually indicated by a circle or specific icon) until the LED display illuminates.
  • To turn off: Press and hold the power button again until the LED display turns off.

Adjusting Intensity (Color-Phase Display)

The KIX Em40 uses a unique color-phase LED display to indicate intensity levels, moving from cooler tones (lower intensity) to warmer, richer colors (maximum output).

  • Increase Intensity: Use the "Up" touchpad (often marked with a '+' or upward arrow) to gradually increase the stimulation. Observe the LED display transition through colors.
  • Decrease Intensity: Use the "Down" touchpad (often marked with a '-' or downward arrow) to gradually decrease the stimulation. The LED display will transition back to cooler colors.
  • Adjust the intensity slowly and to a comfortable level.

Selecting Stimulation Patterns

The KIX Em40 features 5 built-in stimulation patterns.

  • Press the "Pattern" button (often indicated by a circular arrow or wave icon) to cycle through the available patterns.
  • Each press will switch to the next pattern. Experiment to find the pattern that suits your preference.

Using Sweep 'n Keep Mode

The unique Sweep 'n Keep mode allows for modification of the frequency alongside intensity, offering a wider range of sensations.

  • To activate Sweep 'n Keep mode, select it from the stimulation patterns.
  • Once active, the intensity touchpads may also influence the frequency, providing a dynamic sensation. Refer to the device's specific behavior for this mode.

Maintenance and Care

  • Cleaning the Device: Wipe the KIX Stimulator with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
  • Cleaning Electro Pads: After each use, gently wipe the adhesive side of the electro pads with a damp cloth to remove any residue. Allow them to air dry completely before reattaching the protective film.
  • Storage: Store the device and accessories in the provided microfibre storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Pad Lifespan: The self-adhesive electro pads have a limited lifespan. Replace them when they lose their adhesiveness or if you notice reduced conductivity.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is depleted.Charge the device using the provided USB cable.
No sensation or weak sensation.
  • Pads not properly adhered to skin.
  • Pads have lost adhesiveness/conductivity.
  • Intensity set too low.
  • Cable not securely connected.
  • Ensure pads are firmly pressed onto clean, dry skin.
  • Replace old electro pads with new ones.
  • Increase intensity gradually using the "Up" touchpad.
  • Check all cable connections.
Device turns off unexpectedly.Low battery.Recharge the device.

Specifications

  • Model: Em40 (KIX Stimulator)
  • Output: Single Channel
  • Intensity Control: Touchpad with Color-Phase LED Display
  • Stimulation Patterns: 5 pre-programmed, including Sweep 'n Keep mode
  • Power Source: USB Rechargeable
  • Battery Life: Approximately 3 hours continuous play (depending on intensity)
  • Dimensions: Pocket-sized (exact dimensions not provided, inferred from description)
  • Manufacturer: ASK GRANDPA GOURMET COFFEES (as per product data)
  • ASIN: B0CHJD8J6C

Warranty and Support

The Electrastim Kix Em40 comes with a warranty card included in the package. Please refer to the warranty card for specific terms, conditions, and duration of the warranty.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the manufacturer or authorized reseller. Contact information can typically be found on the product packaging, the warranty card, or the point of purchase.

Manufacturer: ASK GRANDPA GOURMET COFFEES

© 2023 Electrastim. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.