Introduction
The TriPollar Stop Vx 2 is an advanced at-home facial device designed to deliver professional-level skincare results. Utilizing new Triple-Wave Multi-RF and Dynamic Muscle Activation (DMA) technologies, this device aims to stimulate collagen production, diminish the appearance of fine lines and wrinkles, and improve skin tone for a smoother, more lifted appearance. The 2nd Generation Thermal Mapping ensures a personalized and effective treatment by providing accurate temperature control.
What's in the Box
Your TriPollar Stop Vx 2 kit includes the following components:
- TriPollar STOP Vx 2 Device
- TriPollar STOP Vx 2 Power Supply
- TriPollar Preparation Gel (50ml / 1.7 fl oz)
- TriPollar STOP Vx 2 User Manual
Setup
Before your first use, ensure the TriPollar Stop Vx 2 device is fully charged. Connect the power supply to the device and a suitable power outlet. The device is ready for use once charged.
- Cleanse Face: Begin by thoroughly cleansing your face to remove any makeup, dirt, or oils. Ensure your skin is clean and dry before proceeding.
- Apply Preparation Gel: Apply a thin, even layer of the TriPollar Preparation Gel to the treatment area. This gel is essential for ensuring proper conductivity and optimal results. Do not use the device without the preparation gel.
Operating Instructions
Follow these steps for an effective treatment with your TriPollar Stop Vx 2 device:
- Prepare Skin: As mentioned in the setup, ensure your face is clean and a thin layer of TriPollar's Preparation Gel is applied to the treatment area.
- Divide Face into Areas: For systematic treatment, split your face into three main areas: the left cheek, right cheek, and forehead.
- Activate Device: Plug in the device, press the power button, and choose your desired RF power mode.
- Begin Treatment: Keep the device electrodes in full contact with the skin. Apply slight pressure and move the device in slow, circular motions. When an orange light appears, indicating optimal temperature, you may increase the motion size. Continue this for 4-5 minutes per area, then move to the next.
- Activate RF + DMA Mode: For enhanced results, activate the RF + DMA mode by pressing the button and choosing your preferred strength. Slowly move the device along the jawline in linear motions for 4-5 minutes on each side.
- Post-Treatment: After completing your session, wash off any remaining Preparation Gel from your face.
Product Overview Video
Video: A brief overview of the TriPollar Stop Vx 2 device, highlighting its key benefits such as diminishing fine lines, tightening the jawline, and stimulating collagen production.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your TriPollar Stop Vx 2 device:
- Cleaning: After each use, gently wipe the device electrodes with a soft, damp cloth to remove any residual preparation gel. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storing.
Troubleshooting
If you encounter any issues with your TriPollar Stop Vx 2 device, consider the following:
- Device Not Turning On: Ensure the device is fully charged and the power supply is securely connected.
- No Sensation/Heat: Verify that a sufficient layer of TriPollar Preparation Gel has been applied to the skin. The gel is crucial for conductivity. Ensure the electrodes are in full contact with the skin.
- Orange Light Not Appearing: Continue moving the device in slow, circular motions. The orange light indicates that the optimal temperature has been reached. If it still doesn't appear after several minutes, ensure proper gel application and skin contact.
- General Malfunction: If the device is not functioning as expected, refer to the complete user manual for more detailed troubleshooting steps or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | STOP Vx 2 |
| Brand | TriPollar |
| Color | Black |
| Material | Metal, Plastic |
| Package Dimensions | 8 x 5 x 4 inches |
| Item Weight | 1.75 Pounds |
| Manufacturer | TriPollar |
| First Available Date | September 6, 2023 |
Warranty and Support
For information regarding the product warranty, please refer to the documentation included in your TriPollar Stop Vx 2 kit or visit the official TriPollar website. For technical support or any inquiries, please contact TriPollar customer service directly.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Manufacturer: TriPollar
UK Authorised Representative: Pollogen Ltd.
US Importer: Passiflora, Inc.
