Product Overview
The WDZCZDoo 58CC Gas Chainsaw is a powerful and efficient cutting tool designed for various tasks such as felling trees, limbing, and cutting firewood. It features a 58cc 2-stroke engine, a 20-inch guide bar, and is engineered for ease of use and durability. This manual provides essential information for the safe assembly, operation, and maintenance of your chainsaw.
Figure 1: Overview of the WDZCZDoo 58CC Gas Chainsaw with 20-inch guide bar.
Safety Information
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand this manual completely before operating the chainsaw. Failure to follow safety instructions can result in serious injury or death.
- Always wear appropriate personal protective equipment (PPE), including a helmet, eye protection, hearing protection, gloves, and safety boots.
- Ensure the work area is clear of bystanders, children, and pets.
- Inspect the chainsaw before each use for any damage, loose parts, or fuel leaks.
- Never operate the chainsaw when fatigued, under the influence of alcohol, drugs, or medication.
- Maintain a firm grip with both hands on the chainsaw handles.
- Be aware of kickback and how to avoid it.
- Fuel the chainsaw in a well-ventilated area, away from ignition sources.
- Store the chainsaw and fuel safely when not in use.
Package Contents
Upon unpacking, verify that all items listed below are present and undamaged. If any items are missing or damaged, contact customer support immediately.
- 1x Gas Chainsaw Unit
- 1x Saw Chain
- 1x Guide Bar
- 1x Chain Bar Cover
- 1x Fuel Tank (mixing bottle)
- 1x Tool Bag
- 1 Pair of Gloves
- 1x Screwdriver
- 1x Funnel
- 1x English Manual
- Other Assembly Accessories
Figure 2: All components included in the WDZCZDoo 58CC Gas Chainsaw package.
Setup and Assembly
Follow these steps carefully to assemble your chainsaw before first use.
- Install the Jam Teeth: Position the jam teeth in the correct direction onto the chainsaw body.
- Install the Guide Bar: Securely attach the guide bar to the chainsaw.
- Install the Chain: Carefully place the saw chain around the guide bar and sprocket, ensuring the cutting edges are facing the correct direction.
- Cover the Side Cover: Place the side cover over the guide bar and chain assembly.
- Adjust Chain Tightness: Adjust the chain tension using the tensioning screw until the chain is snug but can still be pulled freely by hand. Refer to the detailed instructions in the included English manual for precise tensioning.
- Tighten the Screw: Securely tighten all screws and nuts holding the guide bar and side cover in place.
Figure 3: Proper installation and tensioning of the saw chain on the guide bar.
Operating Instructions
Fueling the Chainsaw
This chainsaw uses a 2-stroke engine and requires a specific fuel mixture. Mix 90# gasoline with 2-stroke oil at a ratio of 25:1 (Gasoline:Oil). Use the provided fuel tank/mixing bottle for accurate measurement. Always fuel in a well-ventilated area, away from open flames or sparks.
Starting the Chainsaw
Follow these steps to start the chainsaw:
- Push the Brake: Engage the chain brake by pushing it forward. This is a critical safety step to prevent accidental chain movement during startup.
- Move On/Off Switch to ON: Locate the On/Off switch and move it to the "On" position.
- Pull Choke Knob Out: Pull the choke knob fully out to its designated position.
- Pull Start Handle: Pull the starter handle firmly and smoothly, up to a maximum of 6 times, until the engine briefly fires or attempts to start.
- Push Choke Knob Back: Once the engine has fired, push the choke knob back fully to its original position.
- Pull Starter Until Engine Starts: Pull the starter handle again until the engine fully starts and runs.
Once the engine is running, allow it to warm up for a few moments before disengaging the chain brake and beginning operation.
Figure 4: Proper two-hand grip while operating the chainsaw to cut wood.
Maintenance
Regular maintenance is crucial for the longevity and safe operation of your chainsaw. Perform these checks and tasks regularly.
- Chain Sharpening: Keep the saw chain sharp. A dull chain increases effort, reduces cutting efficiency, and can lead to kickback. Refer to the detailed manual for sharpening angles and techniques.
- Chain Tension: Check chain tension frequently, especially during initial use. Adjust as needed to ensure it is snug but moves freely.
- Guide Bar Maintenance: Clean the guide bar groove and oil holes regularly. Flip the guide bar periodically to ensure even wear.
- Air Filter Cleaning: Clean the air filter after every few hours of operation, or more frequently in dusty conditions. A clogged air filter can reduce engine performance.
- Spark Plug Inspection: Inspect the spark plug periodically. Clean or replace it if it is fouled or worn.
- Lubrication: Ensure the automatic oiler is functioning correctly and the chain oil tank is filled with appropriate chain lubricant.
- General Cleaning: Keep the chainsaw clean from sawdust, debris, and oil residue.
Troubleshooting
This section provides solutions to common issues you might encounter with your chainsaw.
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel or incorrect fuel mixture Choke not set correctly Spark plug fouled or loose Chain brake engaged | Check fuel level and mixture (25:1 Gasoline:Oil) Ensure choke is pulled out for cold start, then pushed in Inspect and clean/replace spark plug Disengage chain brake after starting procedure |
| Engine starts but stalls | Incorrect choke setting Air filter clogged Idle speed too low | Ensure choke is fully pushed in after starting Clean or replace air filter Adjust idle speed screw (refer to detailed manual) |
| Chain does not cut efficiently | Dull chain Incorrect chain tension Guide bar issues | Sharpen or replace chain Adjust chain tension Clean guide bar groove and oil holes |
| Chain pops off guide bar | Loose chain tension Worn guide bar or chain | Adjust chain tension to be snug Inspect and replace worn components |
For more complex issues or repairs, it is recommended to consult a qualified service technician.
Specifications
| Feature | Detail |
|---|---|
| Model | 5800 |
| Engine Type | Single Cylinder, Air-cooled, 2-Stroke |
| Displacement | 58cc |
| Power | 2.4 kW (2.39 Kilowatts) |
| Speed | 10000 rpm |
| Guide Bar Length | 50 cm (20 inches) |
| Max. Cutting Diameter | 50 cm (20 inches) |
| Fuel Tank Capacity | 550 ml (18.6 Oz) |
| Chain Oil Tank Capacity | 140 ml (4.73 Oz) |
| Oil Mixture Ratio | 25:1 (90# Gasoline: Oil) |
| Ignition System | Self-reset Pull Start |
| Volume | 110 dB |
| Overall Size (L*W*H) | 91 x 24 x 29 cm (35.82 x 9.44 x 11.41 inches) |
| Net Weight | 7 kg (15.43 lbs) |
| Brand | WDZCZDoo |
Figure 5: Dimensional overview of the WDZCZDoo 58CC Gas Chainsaw.
Warranty Information
Specific warranty details for the WDZCZDoo 58CC Gas Chainsaw are not provided in the product information. Please refer to the warranty card included with your purchase or contact the manufacturer directly for warranty terms and conditions.
Customer Support
For technical assistance, parts inquiries, or any questions regarding your WDZCZDoo 58CC Gas Chainsaw, please refer to the contact information provided in the packaging or on the manufacturer's official website. Specific customer support contact details are not provided in this document.
