User Manual

Introduction

This manual provides essential information for the proper setup, operation, maintenance, and care of your Reebok RBK Premier Pump Paris Trainer Marathon Unisex Sneakers. Please read these instructions carefully to ensure optimal performance and longevity of your footwear.

Image: Side view of the Reebok RBK Premier Pump Paris Trainer Marathon Unisex Sneakers, showcasing the multi-colored design and sole structure.

Setup

1. Unboxing: Carefully remove the sneakers from their packaging. Inspect for any visible damage or manufacturing defects.
2. Initial Fit: Before lacing, slide your foot into the sneaker. Ensure your heel is comfortably seated and there is adequate space (approximately a thumb's width) between your longest toe and the front of the shoe.
3. Lacing: Use the provided laces to secure the shoe. Adjust the lacing tension to achieve a snug yet comfortable fit across the top of your foot, avoiding excessive tightness that could restrict circulation.

Image: Top-down view of the Reebok RBK Premier Pump Paris Trainer Marathon Unisex Sneakers, highlighting the lacing system and overall shape.

Operating the Pump Technology

The Reebok Pump technology allows for a customized, locked-in fit by inflating air chambers within the shoe. This feature is designed to enhance support and comfort during athletic activities.

1. Inflating the Pump: Locate the 'The Pump' button, typically found on the side or heel of the shoe. Repeatedly press this button to inflate the internal air chambers. You will feel the shoe snugging around your foot. Inflate until you achieve a secure and comfortable fit, but do not over-inflate.
2. Deflating the Pump: To release the air and loosen the fit, locate the small release valve or button, usually adjacent to the 'The Pump' button. Press and hold this valve to deflate the air chambers.
3. Usage: Adjust the pump as needed before and during your activity to maintain optimal comfort and support.

Image: Rear view of the Reebok RBK Premier Pump Paris Trainer Marathon Unisex Sneakers, clearly showing 'The Pump' button on the heel for fit adjustment.

Maintenance and Care

• Cleaning: For general cleaning, gently wipe the faux suede and rubber surfaces with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. For stubborn dirt, a soft brush can be used on the rubber sole.
• Drying: Allow the sneakers to air dry naturally at room temperature. Do not expose them to direct heat sources like radiators or direct sunlight, as this can damage materials.
• Storage: Store your sneakers in a cool, dry place away from direct sunlight when not in use. Avoid storing them in damp or humid environments.
• Avoid Machine Washing: Do not machine wash or tumble dry these sneakers, as it can compromise their structure and materials.

Troubleshooting

• Uncomfortable Fit: If the shoes feel too tight or too loose, adjust the lacing and the Pump inflation. Ensure you are wearing appropriate socks for your activity.
• Pump Not Inflating/Deflating: Check that the pump button is being pressed firmly and the release valve is not stuck. If issues persist, ensure no debris is obstructing the mechanism.
• Squeaking Noise: A new shoe may occasionally squeak. This often resolves with wear. Ensure laces are tied correctly and the insole is properly seated.

Specifications

Warranty and Support

For information regarding warranty coverage, product support, or service inquiries, please refer to the official Reebok website or contact Reebok customer service directly. Keep your proof of purchase for any warranty claims.

Reebok Official Website: www.reebok.com