Introduction
The 1Zpresso X-Ultra Manual Coffee Grinder is designed for precision and efficiency, offering a superior grinding experience for various brewing methods. Its robust construction and innovative external adjustment mechanism ensure consistent results and ease of use. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your grinder to help you achieve the best possible coffee experience.

Figure 1: 1Zpresso X-Ultra Manual Coffee Grinder and included accessories (carrying case, cleaning brush, air blower, anti-slip rubber band).
Setup
Upon unboxing your 1Zpresso X-Ultra grinder, ensure all components are present: the grinder body, handle, magnetic catch cup, cleaning brush, and air blower. The grinder comes pre-assembled, but understanding its parts is crucial for operation and maintenance.
Component Overview
- Grinder Body: Contains the burr set and adjustment mechanism.
- Handle: Attaches to the top shaft for manual grinding.
- Magnetic Catch Cup: Attaches to the bottom of the grinder body to collect ground coffee.
- Cleaning Brush & Air Blower: Tools for routine maintenance.

Figure 2: The precision-calibrated heptagonal burr and shaft assembly, designed for consistent grinding.

Figure 3: The magnetic catch cup easily detaches for quick access to ground coffee.
Operating Instructions
1. Adjusting Grind Size
The X-Ultra features an innovative external adjustment design with 60 steps per rotation, allowing for precise control over your grind size. To adjust, simply rotate the numerical dial located at the top of the grinder. Finer settings are achieved by rotating clockwise, and coarser settings by rotating counter-clockwise.

Figure 4: Adjusting the external grind setting for desired fineness.

Figure 5: Recommended grind settings for various brewing methods, with 12.5 microns per click and up to 200 clicks available.
2. Loading Coffee Beans
Remove the handle and the top cap. Pour your desired amount of whole coffee beans into the hopper. The magnetic catch cup has a capacity of 25-30g. Replace the top cap and handle securely.
3. Grinding
Hold the grinder firmly with one hand and rotate the handle clockwise with the other. The heptagonal burr design ensures smooth and efficient grinding. Continue grinding until all beans have passed through the burrs and collected in the magnetic catch cup.

Figure 6: The foldable handle offers a compact design and an ergonomically designed knob for easy grip.
Official Product Video
Video 1: An official video demonstrating the usage of the 1Zpresso X-Ultra Manual Coffee Grinder, including loading beans, grinding, and brewing coffee.
Maintenance
Regular cleaning is essential to maintain the performance and longevity of your 1Zpresso X-Ultra grinder. The grinder is designed for easy disassembly without tools.
Cleaning Procedure
- Disassembly: Gently twist and pull the magnetic catch cup to remove it. The burr assembly can be easily removed by hand for thorough cleaning.
- Brush Cleaning: Use the included cleaning brush to remove any residual coffee grounds from the burrs, shaft, and internal components.
- Air Blower: Use the air blower to clear out fine particles from the hopper chamber and other hard-to-reach areas.
- Reassembly: Reassemble the grinder by aligning the burr assembly and securing the magnetic catch cup. Ensure all parts are dry before reassembly.
Note: Do not wash the grinder with water, as this can damage the burrs and internal mechanisms. Use only the provided brush and air blower for cleaning.

Figure 7: The grinder can be quickly disassembled for effortless cleaning without the need for tools.

Figure 8: The essential cleaning tools provided with your grinder.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inconsistent Grind | Incorrect grind setting; burrs need cleaning. | Adjust grind setting to a finer or coarser level. Clean the burrs thoroughly. |
| Difficulty Grinding | Grind setting too fine; burrs clogged. | Adjust to a coarser grind setting. Disassemble and clean the burrs. |
| Excessive Static | Dry environment; certain coffee types. | Lightly mist beans with water before grinding (Ross Droplet Technique). Use the anti-slip rubber band if provided. |
Specifications
- Brand: 1Zpresso
- Model: X-Ultra-Space Gray
- Color: Space Gray
- Material: Stainless Steel
- Item Weight: 1.32 Pounds (approximately 600g)
- Product Dimensions: 6.7"L x 2"W x 7.2"H (173mm H x 52mm D)
- Catch Cup Capacity: 25-30g
- Grind Adjustment: External, 60 steps per rotation, 12.5 microns per click
- Burr Type: Heptagonal Stainless Steel Burr

Figure 9: The compact and ergonomic design of the X-Ultra grinder, ideal for easy handling.
Warranty and Support
The 1Zpresso X-Ultra Manual Coffee Grinder includes a one-year limited warranty. The burr was calibrated and fixed in place by the 1Zpresso team, ensuring no wobbly parts or burrs that come loose as time goes on. Estimated grind capacity is approximately 100-200KG with general use.
For any inquiries, technical assistance, or warranty claims, please contact 1Zpresso customer support. You will definitely get 100% customer support.
For more information, visit the official 1Zpresso store: 1Zpresso Store