unho Mobile TV Floor Stand (B0CHB51CLB)

unho Mobile TV Floor Stand Instruction Manual

Model: B0CHB51CLB

1. Introduction

Thank you for choosing the unho Mobile TV Floor Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new TV stand. Designed for large LCD/LED flat or curved screens ranging from 65 to 100 inches and supporting up to 220 lbs (100 kg), this stand features adjustable height and two tiered shelves for media devices. Please read these instructions carefully before beginning assembly and retain them for future reference.

unho Mobile TV Floor Stand in a modern gallery setting with a large TV displaying a sunset over the ocean.

Figure 1.1: The unho Mobile TV Floor Stand supporting a large television in a contemporary environment.

Video 1.1: An overview of the unho Mobile TV Floor Stand, highlighting its design and features for large screens.

2. Safety Information

To ensure safe assembly and operation, please observe the following precautions:

  • Weight Capacity: Do not exceed the maximum weight capacity of 220 lbs (100 kg) for the TV bracket and 110 lbs (50 kg) for each shelf. Overloading can cause instability and damage.
  • Screen Size: This stand is designed for TVs between 65 and 100 inches. Ensure your TV's VESA pattern is compatible (up to 800x600mm).
  • Assembly: Assembly requires at least two adults. Do not attempt to assemble alone. Follow all steps precisely.
  • Stability: Ensure all screws are tightened securely. If using wheels, lock them when the stand is stationary. If using adjustable feet, ensure the stand is level.
  • Placement: Place the TV stand on a flat, stable surface. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
  • Children and Pets: Keep children and pets away from the stand during assembly. Do not allow children to climb on the stand or shelves.

3. Package Contents

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.

Parts List:

  • TV Mounting Brackets (C) - 2 pcs
  • Vertical Support Poles (D) - 2 pcs
  • Top Shelf (F) - 1 pc
  • Bottom Shelf (B2) - 1 pc
  • Base Frame Components (B1, G) - 1 set (main triangular frames and connecting bars)
  • Adjustable Feet (M) - 4 pcs (optional, for stationary use)
  • Caster Wheels - 4 pcs (optional, for mobility)
  • Anti-slip Pads (N) - 8 pcs
  • Assorted Screws, Washers, and Hex Key (H, Y, J, K, L, P, Q, R, S, T, O)

4. Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for this process.

Video 4.1: Detailed product installation video for the unho Mobile TV Floor Stand.

Assembly Steps:

  1. Assemble the Base Frame:
    • Slide the two horizontal bars (G) into the main triangular base frames (B1).
    • Secure these connections with the appropriate screws and tighten them using the provided hex key.
  2. Attach Shelves to the Base:
    • Place the bottom shelf (B2) onto the assembled base frame, aligning the holes.
    • Secure the bottom shelf with screws.
    • Repeat for the top shelf (F). Ensure the shelves are oriented correctly.
    • Apply the anti-slip pads (N) to the corners of the shelves where they meet the frame to prevent movement.
  3. Install Vertical Support Poles:
    • Insert the two vertical support poles (D) into the top openings of the base frame.
    • Secure the vertical poles with the locking screws, ensuring they are firmly in place.
  4. Mount TV Bracket to Vertical Poles:
    • Attach the TV mounting brackets (C) to the vertical support poles (D) using the provided screws and washers. Ensure the brackets are level and at the desired height.
    • Tighten all screws securely.
  5. Install Feet or Wheels:
    • Decide whether to use the adjustable feet or caster wheels.
    • Screw the chosen feet or wheels into the designated holes at the bottom of the base frame.
    • If using wheels, ensure they are locked when the stand is in its final position.
    Close-up view of the unho Mobile TV Floor Stand's base, showing options for either adjustable feet or lockable caster wheels.

    Figure 4.1: The base of the TV stand offers a choice between adjustable feet for stability or lockable wheels for mobility.

  6. Mount Your TV:
    • Carefully attach your television to the TV mounting brackets (C) using the appropriate VESA screws for your TV model. Refer to your TV's manual for specific VESA mounting instructions.
    • Ensure the TV is centered and securely fastened.

5. Operation

Adjusting Height:

The unho Mobile TV Floor Stand offers 5 levels of height adjustment. To adjust the TV height:

  1. With two people, carefully lift the TV slightly to relieve pressure on the vertical poles.
  2. Loosen the locking screws on the vertical support poles (D).
  3. Adjust the TV to the desired height. The stand allows for a height range from 54 inches (138 cm) to 66 inches (168 cm).
  4. Once at the desired height, re-tighten the locking screws firmly to secure the TV in place.
Graphic illustrating the height adjustment range of the TV stand, from 138cm to 168cm.

Figure 5.1: The TV stand offers multiple height adjustment levels for optimal viewing.

Using the Shelves:

The two-tiered shelves provide storage for media devices such as DVD players, gaming consoles, cable boxes, and soundbars. Ensure that devices placed on the shelves do not exceed the 110 lbs (50 kg) weight limit per shelf.

The two-tiered wooden shelves of the TV stand holding a soundbar and other media devices.

Figure 5.2: The integrated shelves offer convenient storage for various media components.

Mobility (with wheels):

If you have installed the caster wheels, the stand can be easily moved. Unlock the wheels before moving and ensure the path is clear. Lock the wheels once the stand is in its desired position to prevent accidental movement.

6. Maintenance

Regular maintenance will prolong the life of your TV stand:

  • Cleaning: Wipe the metal frame and wooden shelves with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
  • Check Connections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability.
  • Wheel Maintenance: If using wheels, keep them free of dust and debris to ensure smooth movement.

7. Troubleshooting

If you encounter any issues, refer to the following troubleshooting guide:

ProblemPossible CauseSolution
Stand is unstable or wobbles.Loose screws; uneven floor; overloaded shelves/TV.Ensure all screws are tightened. Adjust the leveling feet (if installed) or reposition on a flat surface. Verify TV and shelf weights are within limits.
Difficulty adjusting TV height.Locking screws too tight; TV weight not supported during adjustment.Loosen locking screws sufficiently. Have two people lift the TV slightly to reduce friction before adjusting.
Wheels not rolling smoothly or locking.Debris in wheels; lock engaged.Clean any debris from the wheels. Ensure the wheel locks are disengaged for movement and fully engaged for stationary use.
Shelves are not level.Incorrect installation; uneven weight distribution.Recheck shelf installation steps. Redistribute weight evenly on the shelves.

If the problem persists after attempting these solutions, please contact unho customer support.

8. Specifications

Key specifications for the unho Mobile TV Floor Stand (Model B0CHB51CLB):

FeatureSpecification
Brandunho
ModelB0CHB51CLB
Compatible TV Sizes65 to 100 inches
Max TV Weight Capacity220 lbs (100 kg)
Max VESA Compatibility800x600mm
Shelf Weight Capacity110 lbs (50 kg) per shelf
Adjustable Height Range54 inches (138 cm) to 66 inches (168 cm)
Number of Shelves2-Tiered
MaterialMetal frame, Wooden shelves
ColorBlack
Base Width19.68 inches (50 cm)
Item Weight44.9 pounds
Diagram showing the dimensions of the unho Mobile TV Floor Stand, including height, width, depth, and VESA compatibility.

Figure 8.1: Detailed dimensions and VESA compatibility for the TV stand.

9. Warranty and Support

Warranty Information:

unho products are manufactured with quality and durability in mind. For specific warranty details regarding your Mobile TV Floor Stand, please refer to the warranty card included in your product packaging or visit the official unho website. Keep your purchase receipt as proof of purchase for any warranty claims.

Customer Support:

If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact unho customer support through the retailer where you purchased the product or via the contact information provided on the official unho website. Our team is dedicated to providing prompt and helpful service.

© 2026 unho. All rights reserved.