1. Introduction
The AOPUTTRIVER AP-5000K is a portable digital anemometer designed for accurate measurement of wind speed, temperature, and humidity. This device is suitable for various applications including outdoor sports, environmental monitoring, and industrial use. It features a large LCD display, a 270° rotatable sensor, and multiple measurement units for versatility.
2. Product Overview
Familiarize yourself with the components of your AP-5000K anemometer.
Image 2.1: Front view of the AP-5000K Anemometer with key components labeled.
- Fan Cover: Protects the wind speed sensor.
- Wind Chill Sensor: Measures wind chill temperature.
- Tripod Screw Hole: Allows mounting on a standard 1/4-inch tripod.
- HOLD Button: Freezes the current measurement on the display.
- UNIT Button: Changes the unit of measurement for wind speed.
- Backlight Button: Activates or deactivates the display backlight.
- Power On/Off Button: Turns the device on or off.
- °C/°F Button: Toggles between Celsius and Fahrenheit for temperature display.
- MAX/MIN Button: Displays maximum, minimum, or average readings.
3. Specifications
Image 3.1: Detailed technical parameters of the AP-5000K Anemometer.
| Parameter | Value |
|---|---|
| Wind Speed Range | 0.30 to 30.00 m/s |
| Wind Speed Accuracy | <1.00m/s: ±0.3m/s, 1.00-30.00m/s: ±(2.0%+0.5m/s) |
| Temperature Range | -20.0 °C to 60.0 °C (-4.0 °F to 140.0 °F) |
| Temperature Accuracy | 0.0 °C to 45.0 °C: ±1.0 °C; others: ±1.5 °C |
| Humidity Range | 0.0% to 99.9% RH |
| Humidity Accuracy | 20% to 80% RH: ±5.0% RH; others: ±6.0% RH |
| Wind Speed Units | m/s, km/h, ft/s, ft/m, knots, mph |
| Dimensions (L x W x H) | 21 x 7.2 x 3.5 cm (8.27 x 2.83 x 1.38 inches) |
| Weight | 350 grams (0.77 lbs) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Auto Power Off | After 10 minutes of inactivity |
4. Setup
4.1 Battery Installation
The AP-5000K requires two AAA batteries for operation. To install:
- Locate the battery compartment cover on the back of the device.
- Use the provided small screwdriver to loosen the screw on the battery cover.
- Remove the battery cover.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Replace the battery cover and tighten the screw.
4.2 Initial Power On
After installing batteries, press the Power On/Off button to turn on the device. The LCD display will illuminate.
5. Operating Instructions
5.1 Power On/Off
- Press the Power On/Off button to turn the anemometer on.
- Press and hold the Power On/Off button for a few seconds to turn the anemometer off.
- The device will automatically power off after 10 minutes of inactivity to conserve battery life.
5.2 Changing Wind Speed Units
With the device powered on, press the UNIT button repeatedly to cycle through the available wind speed units: m/s, km/h, ft/s, ft/m, knots, and mph.
5.3 Changing Temperature Units
Press the °C/°F button to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
5.4 Measurement Modes (MAX/MIN/AVG)
Press the MAX/MIN button to cycle through different measurement modes:
- MAX: Displays the maximum recorded wind speed, temperature, or humidity since the device was powered on or the mode was reset.
- MIN: Displays the minimum recorded wind speed, temperature, or humidity.
- AVG: Displays the average recorded wind speed, temperature, or humidity.
- Pressing the button again will return to real-time measurement.
5.5 Data Hold Function
Press the HOLD button to freeze the current readings on the display. Press it again to release the hold and resume real-time measurements.
5.6 Backlight
Press the Backlight button to turn the LCD backlight on or off, improving visibility in low-light conditions.
5.7 270° Rotatable Sensor
The wind speed sensor probe can be rotated up to 270 degrees. This allows for flexible positioning to accurately capture wind flow from various directions without needing to reposition the entire device.
5.8 Tripod Mounting
The AP-5000K includes a 1/4-inch tripod screw hole at its base, allowing it to be mounted on a standard tripod for stable, hands-free measurements, particularly useful for extended monitoring or when precise positioning is required.
Image 5.1: The AP-5000K with its tripod screw hole and non-slip grip. Note: Tripod not included.
6. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the anemometer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
- Sensor Care: Keep the wind speed sensor (fan) free from dust and debris to ensure accurate readings. Avoid touching the fan blades directly.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Dead or incorrectly installed batteries | Check battery polarity, replace with new batteries. |
| Inaccurate wind speed readings | Sensor obstructed or damaged | Ensure the fan is clear of obstructions and rotates freely. Avoid strong impacts. |
| Display is dim or flickering | Low battery power | Replace batteries. |
| No display or partial display | Device malfunction | Remove and reinsert batteries. If the problem persists, contact customer support. |
8. Warranty and Support
The AOPUTTRIVER AP-5000K Anemometer comes with a 1-year warranty from the date of purchase. Additionally, lifetime technical support is provided. If you encounter any issues or have questions regarding the product, please contact AOPUTTRIVER customer service for assistance.
9. Package Contents
Upon opening your AOPUTTRIVER AP-5000K package, you should find the following items:
Image 9.1: All items included in the AP-5000K product package.
- 1 x AOPUTTRIVER AP-5000K Digital Anemometer
- 2 x AAA Batteries
- 1 x User Manual
- 1 x Carrying Bag
- 1 x Small Screwdriver
