1. Important Safety Information
Read this entire manual carefully before installing and using the Nania START I i-Size car seat. Failure to follow these instructions may result in serious injury or death to your child.
- This car seat is approved according to the new i-Size R129 standard.
- It is designed for children with a height between 106 cm and 140 cm.
- The car seat must only be used in a forward-facing position.
- Always secure your child using the vehicle's 3-point seat belt.
- Never leave your child unattended in the car seat.
- Ensure the vehicle's seat belt is correctly routed and tightened, with no twists.
- Do not modify the car seat in any way.
- Replace the car seat after any accident, even if there is no visible damage.
2. Product Overview
The Nania START I i-Size car seat is designed to provide safety and comfort for older children. Key features include:
- i-Size R129 Approval: Meets the latest European safety standards.
- Side Impact Protection: Enhanced protection in case of a side collision.
- Height-Adjustable Headrest: Adapts to your child's growth for optimal head and neck support.
- Reclining Base: Provides a comfortable position for your child.
- Memory Foam: Integrated into the headrest area for added comfort.
- Made in France: Manufactured and tested in France.

Figure 2.1: Front view of the Nania START I i-Size car seat. This image shows the overall design and seating area of the car seat.

Figure 2.2: Side view of the Nania START I i-Size car seat. This image highlights the side impact protection and the profile of the seat.
3. Setup and Installation
Follow these steps to correctly install the Nania START I i-Size car seat in your vehicle.
- Positioning the Car Seat: Place the car seat on an appropriate vehicle seat in a forward-facing position. Ensure the car seat is stable and flush against the vehicle's backrest.
- Adjusting the Headrest: The headrest must be adjusted so that it is just above your child's shoulders.

Figure 3.1: Headrest adjustment mechanism. To adjust, locate the lever or button at the back of the headrest and pull upwards or push downwards to set the desired height.
- Adjusting the Reclining Base: The car seat features a reclining base for comfort.

Figure 3.2: Reclining base in one position. To recline the base, locate the adjustment mechanism usually at the front or underside of the seat and adjust as needed before securing the child.
- Securing with Vehicle Seat Belt:
- Place your child in the car seat.
- Route the vehicle's 3-point seat belt through the designated guides on the car seat. The lap belt should pass under the armrests and across your child's hips, making contact with the thighs.
- The diagonal shoulder belt should pass through the red belt guide near the headrest, across your child's shoulder and chest, without touching the neck.
- Buckle the seat belt and pull it tight to remove any slack. Ensure the car seat is firmly secured and does not move excessively.
4. Operating Instructions
Once installed, ensure your child is correctly seated and secured for every journey.
- Always check that the headrest is at the correct height for your child.
- Ensure the vehicle's 3-point seat belt is properly routed through all guides and is snug against your child's body.
- The car seat is recommended for children aged 5 years and older for maximum comfort, within the height range of 106-140 cm.
- Before each use, verify that the car seat is securely installed and the child is correctly buckled.
5. Care and Maintenance
Proper care will extend the life of your Nania START I i-Size car seat.
- Cleaning the Fabric Cover: The fabric cover can be removed for cleaning. Refer to the care label on the cover for specific washing instructions. Typically, machine wash on a gentle cycle with mild detergent and air dry. Do not tumble dry or iron.
- Cleaning the Plastic Parts: Wipe plastic parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the car seat in a clean, dry place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the car seat for any signs of wear, damage, or loose parts. If any damage is found, discontinue use and contact customer support.
6. Troubleshooting
If you encounter issues with your Nania START I i-Size car seat, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Car seat feels loose after installation. | Vehicle seat belt not tightened sufficiently or incorrectly routed. | Re-route the vehicle's 3-point seat belt, ensuring it passes through all designated guides. Pull the belt firmly to remove all slack. Ensure the car seat is pressed firmly into the vehicle seat during tightening. |
| Headrest does not adjust smoothly. | Mechanism might be obstructed or dirty. | Check for any obstructions. Clean the headrest adjustment mechanism area. Ensure you are pressing the release button/lever fully while adjusting. |
| Child's head slumps forward when sleeping. | Headrest height incorrect or reclining base not optimally set. | Adjust the headrest to the correct height. Utilize the reclining base feature to find a more comfortable sleeping position for your child, if available and safe for your vehicle. |
If the problem persists, please contact Nania customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model | START I |
| Manufacturer Reference | 7209110335A |
| Approval Standard | UN R129 (i-Size) |
| Child Height Range | 106 - 140 cm |
| Approximate Age Range | 5 - 10 years |
| Maximum Supported Weight | 40 kg |
| Installation Type | Vehicle 3-point seat belt |
| Orientation | Forward-facing |
| Product Dimensions (L x W x H) | 44 x 44 x 68 cm |
| Item Weight | 1 kg |
| Main Material | Foam, Polyester |
| Special Features | Adjustable headrest, Reclining base, Side impact protection |
| Manufacturer | TEAMTEX |

Figure 7.1: Product dimensions and weight. The diagram illustrates the width, depth, and adjustable height range of the car seat, along with its weight.
8. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Nania website. For technical support, spare parts, or any questions not covered in this manual, please contact Nania customer service.
Manufacturer: TEAMTEX
Website: www.nania.com (Please note: This is a placeholder URL as no specific support link was provided in the product data.)