Introduction
The SPYBOTS CLOCKBOT is a multi-functional device designed to serve as both a digital alarm clock and a security robot. When activated in "Guard" mode, it utilizes a motion sensor to detect intruders, responding with a screeching alarm and by firing foam discs. This manual provides instructions for the proper setup, operation, and maintenance of your CLOCKBOT.
Safety Information
WARNING: Small parts. Choking hazard. Not suitable for children under 3 years.
- Keep foam discs away from eyes and face.
- Do not modify the product.
- Use only specified batteries.
- Adult supervision is recommended during operation, especially for younger users.
What's in the Box
- 1 x SPYBOTS CLOCKBOT unit
- Foam discs
Note: 3 AAA batteries are required and are not included.
Setup
1. Battery Installation
- Locate the battery compartment on the underside of the CLOCKBOT.
- Using a small screwdriver (not included), open the battery compartment cover.
- Insert 3 new AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screw.
Image: The SPYBOTS CLOCKBOT unit, showing its orange body, digital display, and included foam discs. The packaging is visible in the background, illustrating the product's overall appearance.
2. Loading Foam Discs
- Identify the disc loading slot on the top of the CLOCKBOT.
- Carefully insert the foam discs into the slot. Ensure they are stacked correctly and do not jam the mechanism.
Image: A close-up view of the SPYBOTS CLOCKBOT, displaying its digital clock face and the disc-shooting mechanism on top. Several blue foam discs are placed in front of the unit, ready for loading.
Operating Instructions
1. Setting the Time
- Locate the time setting buttons, usually on the back or side of the unit.
- Press the "SET" button (or equivalent) to enter time setting mode.
- Use the "HOUR" and "MINUTE" buttons to adjust the current time.
- Press "SET" again to confirm and exit time setting mode.
2. Setting the Alarm
- Press the "ALARM SET" button (or equivalent).
- Use the "HOUR" and "MINUTE" buttons to set the desired alarm time.
- Press "ALARM SET" again to confirm. An alarm icon should appear on the display, indicating the alarm is active.
- To turn off the alarm sound when it rings, press any button.
3. Activating "Guard" Mode
The "Guard" mode transforms your CLOCKBOT into a security device, utilizing its motion sensor, alarm, and disc-shooting capabilities.
- Locate the "Guard" mode switch or button, typically on the back or side of the unit.
- Switch or press the button to activate "Guard" mode. An indicator light or icon may illuminate on the display.
- Position the CLOCKBOT in the desired area, ensuring the motion sensor (infrared sensors) has a clear line of sight.
- When the invisible motion-sensor beam is tripped, the CLOCKBOT will emit a screeching alarm and fire foam discs.
Image: A side view of the SPYBOTS CLOCKBOT, highlighting its key features such as the sensor-triggered disc shooter, infrared sensors, digital alarm clock display, and the intruder screaming siren. This image illustrates the functional components of the device.
4. Deactivating "Guard" Mode
To turn off the security function, simply switch or press the "Guard" mode button again. The indicator light/icon should turn off.
Maintenance
1. Cleaning
- Wipe the CLOCKBOT with a soft, dry cloth.
- Do not use abrasive cleaners or immerse the unit in water.
2. Battery Replacement
- Replace batteries when the display dims or functions become erratic.
- Follow the battery installation steps outlined in the "Setup" section.
- Dispose of old batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| CLOCKBOT does not power on. | Batteries are dead or incorrectly installed. | Check battery polarity or replace with new AAA batteries. |
| Discs are not firing. | Discs are jammed or not loaded correctly. | Ensure discs are properly loaded and clear any obstructions. |
| Motion sensor not detecting movement. | Sensor is obstructed or "Guard" mode is not active. | Ensure clear line of sight for sensors and verify "Guard" mode is switched on. |
| Alarm is not sounding. | Alarm is not set or volume is too low (if adjustable). | Verify alarm settings. |
Specifications
- Brand: NSI International
- Model Number: 68423
- Color: Orange
- Display Type: Digital
- Special Feature: Alarm, Motion Sensor, Disc Shooter
- Power Source: Battery Powered
- Batteries Required: 3 x AAA (not included)
- Material: Plastic
- Product Dimensions: 6.3 x 2.76 x 8.27 inches
- Item Weight: 12.7 ounces (0.36 Kilograms)
- Recommended Age: 6 years and up
Customer Support
For further assistance or inquiries regarding your SPYBOTS CLOCKBOT, please contact NSI International customer support. Refer to the product packaging or the official NSI International website for contact details.
Website: www.nsi-international.com