onerbl AC/DC Adapter Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your onerbl 2-Prong AC/DC Adapter. This adapter is specifically designed to provide power and charge the iDOO Model I-C-023 7.4V 2500mAh Lithium Li-ion Battery Electric Spin Scrubber. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following safety precautions:

• Input Voltage: Ensure the power outlet voltage is within the adapter's specified input range of AC 100-240V, 50/60Hz.
• Compatibility: Use this adapter only with compatible devices, specifically the iDOO Model I-C-023 Electric Spin Scrubber, to avoid damage to the device or adapter.
• Protection Features: The adapter is equipped with a smart chip providing multiple protections, including short-circuit protection, over-voltage protection, and over-current protection.
• Environmental Conditions: Do not expose the adapter to water, moisture, high temperatures, or direct sunlight. Use in a dry, well-ventilated area.
• Physical Damage: Do not use the adapter if the cord or plug is damaged. Avoid bending, twisting, or pulling the cable excessively.
• Disassembly: Do not attempt to open or repair the adapter. Refer all servicing to qualified personnel.
• Children and Pets: Keep the adapter out of reach of children and pets.

Diagram illustrating the smart chip protection features: short-circuit, over-voltage, and over-current protection.

3. Product Overview

The onerbl AC/DC Adapter is a reliable power supply unit designed for specific electronic devices. It features a durable construction and built-in safety mechanisms.

3.1 Components

• AC/DC Adapter Unit (main body with 2-prong plug)
• Integrated Output Cable (approximately 76 inches / 193 cm in length)

Front and side view of the onerbl AC/DC adapter.

Dimensions of the onerbl AC/DC adapter, showing length, width, and height, along with the 76-inch cable length.

3.2 Features

• Universal Input: AC 100-240V, 50/60Hz for worldwide compatibility.
• Safety Protections: Built-in over-voltage, over-heat, and short-circuit protection.
• Durable Design: Constructed with quality materials, including copper wire and a PVC jacket for longevity.

Cross-section view of the durable copper wire and PVC jacket construction of the adapter cable.

4. Setup

Follow these steps to set up your onerbl AC/DC Adapter:

1. Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
2. Connect to Device: Plug the output connector of the adapter firmly into the charging port of your iDOO Model I-C-023 Electric Spin Scrubber.
3. Connect to Power Outlet: Insert the 2-prong plug of the adapter into a standard AC 100-240V wall outlet.
4. Verify Connection: Ensure both connections are secure. The iDOO device should indicate that it is receiving power or charging (refer to your iDOO device's manual for specific indicators).

5. Operating Instructions

Once properly set up, the adapter will automatically provide power to or charge your iDOO device.

• Charging: When connected, the adapter will charge the iDOO device's battery. The charging time will depend on the battery's current level and capacity.
• Powering: If the iDOO device can operate while plugged in, the adapter will supply continuous power.
• Disconnection: To disconnect, first unplug the adapter from the wall outlet, then disconnect the output connector from your iDOO device.

6. Maintenance

Proper care will extend the life of your adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Avoid wrapping the cable too tightly around the adapter.
• Inspection: Periodically check the cable and plug for any signs of wear or damage.

7. Troubleshooting

If you encounter issues with your adapter, try the following:

• No Power/Charging:
  • Ensure the adapter is securely plugged into both the wall outlet and the iDOO device.
  • Try plugging the adapter into a different wall outlet to rule out a faulty outlet.
  • Check the iDOO device's power indicator (refer to its manual).
• Overheating:
  • If the adapter feels excessively hot, disconnect it immediately.
  • Ensure it is used in a well-ventilated area and not covered.
  • If overheating persists, discontinue use and contact support.
• Device Not Recognizing Adapter:
  • Confirm that the adapter's connector is fully inserted into the iDOO device's port.
  • Verify that this adapter is the correct model for your iDOO I-C-023.

If these steps do not resolve the issue, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the purchase platform or contact the seller directly. Keep your purchase receipt as proof of purchase.