Pointcinco P1 Active Noise Canceling Headphones User Manual

1. Introduction

Thank you for choosing the Pointcinco P1 Active Noise Canceling Headphones. These headphones are designed to provide a superior audio experience with advanced noise cancellation, comfortable fit, and long battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. Product Overview

2.1 Package Contents

• Pointcinco P1 Active Noise Canceling Headphones
• USB-C Charging Cable
• 3.5mm Audio Cable
• User Manual

2.2 Headphone Layout

Familiarize yourself with the buttons and ports on your headphones:

• Power Button: Used to turn the headphones on/off and for Bluetooth pairing.
• Volume Up/Next Track Button: Increases volume with a short press, skips to next track with a long press.
• Volume Down/Previous Track Button: Decreases volume with a short press, goes to previous track with a long press.
• Multi-function Button (MFB): Play/pause music, answer/end calls.
• ANC Button: Toggles Active Noise Cancellation (ANC) and Transparency modes.
• USB-C Charging Port: For charging the headphones.
• 3.5mm Audio Jack: For wired connection.

3. Setup

3.1 Charging the Headphones

1. Connect the USB-C charging cable to the charging port on the headphones.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show charging status. A full charge typically takes approximately 2-3 hours.
4. When fully charged, the LED indicator will change color or turn off.

A full charge provides up to 40 hours of playtime with ANC on, or 60 hours with ANC off.

3.2 Bluetooth Pairing

1. Ensure the headphones are fully charged.
2. Press and hold the Power button for 3-5 seconds until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "Pointcinco P1" from the list of devices.
5. Once connected, the LED indicator will turn solid blue or flash blue slowly.

4. Operating Instructions

4.1 Power On/Off

• Power On: Press and hold the Power button for 2 seconds.
• Power Off: Press and hold the Power button for 3 seconds.

4.2 Active Noise Cancellation (ANC) and Transparency Mode

The P1 headphones feature Hybrid Active Noise Cancellation to reduce ambient noise and a Transparency Mode to allow you to hear your surroundings.

• Press the ANC Button once to cycle through modes: ANC On, Transparency Mode, and ANC Off.
• An audible prompt will indicate the current mode.

4.3 Music Playback

• Play/Pause: Press the MFB once.
• Next Track: Long press the Volume Up button.
• Previous Track: Long press the Volume Down button.
• Volume Up: Short press the Volume Up button.
• Volume Down: Short press the Volume Down button.

4.4 Call Management

The built-in microphone allows for clear hands-free calls.

• Answer/End Call: Press the MFB once.
• Reject Call: Press and hold the MFB for 2 seconds.
• Activate Voice Assistant: Double-press the MFB.

4.5 Wired Mode Connection

You can use the headphones with the included 3.5mm audio cable when the battery is low or for devices without Bluetooth connectivity.

• Plug one end of the 3.5mm audio cable into the headphone's audio jack.
• Plug the other end into your audio source's 3.5mm port.
• Note: In wired mode, ANC and all button controls on the headphones will be unavailable. Audio playback is controlled directly from your connected device.

5. Maintenance

5.1 Cleaning

• Wipe the headphones with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.
• Avoid getting moisture into any openings.

5.2 Storage

• Store the headphones in a cool, dry place away from extreme temperatures.
• When not in use for extended periods, charge the headphones every 3 months to maintain battery health.

6. Troubleshooting

6.1 No Power

• Ensure the headphones are charged. Connect to a power source using the USB-C cable.

6.2 Cannot Pair via Bluetooth

• Make sure the headphones are in pairing mode (LED flashing blue and red).
• Ensure Bluetooth is enabled on your device and it is within range (typically 10 meters).
• Try forgetting the device on your phone's Bluetooth settings and re-pairing.

6.3 No Sound

• Check the volume levels on both the headphones and your connected device.
• Ensure the headphones are properly connected via Bluetooth or the 3.5mm audio cable.
• If using wired mode, remember that headphone controls are inactive; adjust volume from your source device.

6.4 ANC Not Working Effectively

• Ensure ANC mode is activated by pressing the ANC button.
• Check that the earcups form a good seal around your ears. Adjust the headband for a snug fit.

7. Specifications

8. Warranty and Support

Pointcinco products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included in your product packaging or visit our official website. If you encounter any issues or have questions not covered in this manual, please contact our customer support team for assistance.

Customer Support: Please refer to the contact information provided on the product packaging or our official website.