Introduction
Thank you for choosing the PerGar 3-in-1 Alarm Clock Radio. This device combines a digital alarm clock, a Bluetooth speaker, and a wireless charging station with a mobile phone holder. It is designed for convenience and functionality in your bedroom, dorm, or office. This manual provides essential information for safe operation, setup, and maintenance of your device.
Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures, direct sunlight, or dusty environments.
- Do not disassemble or attempt to repair the device yourself. Contact qualified service personnel.
- Use only the provided charging cable or a certified equivalent.
- Keep out of reach of children.
Package Contents
- 1 x PerGar Speaker Alarm Clock
- 1 x Charging Cable
- 1 x Voice Cable
- 1 x English Specification Manual
Product Overview
Familiarize yourself with the components and controls of your PerGar 3-in-1 Alarm Clock Radio.
Image: Front view of the PerGar 3-in-1 Alarm Clock Radio, showing its digital display and overall dimensions (144mm/5.7in height, 75.7mm/3.0in width, 121.5mm/4.8in depth).
Control Buttons
Image: Close-up of the control buttons. From left to right: Play/Pause, Volume Down/Previous Track, Volume Up/Next Track/Snooze. Below these are Power On/Off, Mode Switching/Bass Enhancement, and Alarm Clock On/Off.
Rear Ports
Image: Close-up of the rear connection ports. From left to right: 'In' (Charging port, USB-C), 'Aux' (Voice port, 3.5mm jack), 'Card' (Small memory card port), 'Out' (USB charging port).
Setup
1. Power Connection
- Connect the provided charging cable to the 'In' (USB-C) port on the back of the device.
- Plug the other end of the charging cable into a suitable USB power adapter (not included) and then into a wall outlet.
- The device will power on automatically or can be turned on using the Power button.
2. Initial Time Setting
Refer to the 'Operating Instructions' section for detailed steps on setting the current time and alarm.
Operating Instructions
Power On/Off
- Press and hold the Power On/Off button (labeled with a power icon) to turn the device on or off.
Setting the Clock and Alarm
- To Set Time: In clock mode, press and hold the Alarm Clock On/Off button (labeled with a clock icon) until the hour digits flash. Use the Volume Up (+) and Volume Down (-) buttons to adjust the hour. Press the Alarm Clock On/Off button again to switch to minute adjustment, then use Volume Up (+) and Volume Down (-). Press the Alarm Clock On/Off button one more time to confirm.
- To Set Alarm: Press the Alarm Clock On/Off button once to enter alarm setting mode (alarm icon will appear). Follow the same steps as setting the time to adjust the alarm hour and minute.
- Activate/Deactivate Alarm: In alarm setting mode, press the Alarm Clock On/Off button repeatedly to toggle the alarm on or off.
- Snooze Function: When the alarm sounds, tap the Volume Up (+) button to activate snooze. The alarm will sound again after a short interval.
Bluetooth Speaker Function
- Pairing: Turn on the device. It will automatically enter Bluetooth pairing mode (a sound prompt may indicate this). On your mobile device, search for "PerGar" (or similar name) in the Bluetooth settings and connect.
- Playback: Once paired, play audio from your mobile device. Use the Play/Pause button to control playback.
- Volume Control: Use the Volume Up (+) and Volume Down (-) buttons for short presses to adjust volume.
- Track Control: Long press the Volume Up (+) button for the next track, and long press the Volume Down (-) button for the previous track.
FM Radio Function
- Switch to FM Mode: Press the Mode Switching button (labeled 'M') repeatedly until FM radio mode is activated.
- Auto Scan: In FM mode, long press the Play/Pause button to automatically scan and save available FM stations.
- Manual Tuning: Use the Volume Up (+) and Volume Down (-) buttons to manually tune between saved stations or frequencies.
Wireless Charging
The device features a double coil design for efficient wireless charging.
- Ensure the alarm clock is connected to power.
- Place your Qi-compatible mobile phone horizontally or vertically on the charging pad located on the front of the device.
- The charging indicator light will illuminate, and your phone should display a charging icon.
Image: A smartphone resting horizontally on the integrated phone holder and wireless charging pad of the alarm clock, demonstrating its use for charging and media viewing.
USB Charging (Out Port)
You can charge another device using the USB 'Out' port on the back of the alarm clock.
- Connect a USB charging cable (not included) to the 'Out' port on the back of the alarm clock.
- Connect the other end of the cable to your device (e.g., another smartphone, smartwatch).
- Ensure the alarm clock is powered on.
Mobile Phone Holder
The integrated stand allows you to prop up your smartphone for easy viewing while charging or listening to music.
- Simply place your phone into the designated slot on the front of the device. It supports both horizontal and vertical orientations.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not connected to power; battery depleted. | Ensure the charging cable is securely connected to a working power source. Charge the device. |
| Wireless charging not working. | Phone not Qi-compatible; phone not positioned correctly; foreign objects on pad. | Verify phone supports Qi wireless charging. Reposition phone on the charging pad. Remove any metal objects or thick cases. |
| No sound from speaker. | Volume too low; device not paired; incorrect mode. | Increase volume on both the alarm clock and your connected device. Ensure Bluetooth is paired or correct mode (FM/Aux) is selected. |
| FM radio reception is poor. | Weak signal; interference. | Reposition the device. Extend the antenna if available (not explicitly mentioned but common). |
Specifications
- Brand: PerGar
- Model: B0CGZX6LKC
- Material: Acrylonitrile Butadiene Styrene (ABS), Poly
- Power: 10W
- Battery Type: Built-in Lithium Battery (18650)
- Battery Capacity: 1200mAh
- Display Type: Digital
- Special Features: Alarm, FM Radio, Bluetooth Speaker, Wireless Charging, USB Charging, Mobile Phone Holder
- Dimensions: Approx. 144 x 75.7 x 121.5 mm (5.7 x 3.0 x 4.8 inches)
- Operation Mode: Electrical
- Mounting Type: Tabletop
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to PerGar customer service through the contact information provided on the product packaging or official website.