1. Introduction
The GEEZO Fragrance Candle Warmer Lamp provides a flameless and smoke-free method to enjoy your favorite scented candles. Utilizing a halogen bulb to melt the candle wax from the top down, it releases fragrance efficiently and safely. This manual provides essential information for the proper setup, operation, and maintenance of your candle warmer lamp.
Figure 1: GEEZO Fragrance Candle Warmer Lamp in use.
Benefits of Flameless Warming:
- Enhanced Safety: Eliminates open flames, reducing fire hazards and soot.
- Extended Candle Life: Candles last longer as the wax is melted gradually.
- Consistent Fragrance Release: Provides a steady and even scent distribution.
Figure 2: Comparison highlighting benefits of the candle warmer.
2. Safety Instructions
- Always place the candle warmer on a stable, flat, and heat-resistant surface.
- Keep out of reach of children and pets.
- Do not touch the bulb or the area directly beneath it when the lamp is on or recently turned off, as it can be hot.
- Ensure the candle warmer is unplugged before cleaning or changing the bulb.
- Do not use the candle warmer with candles that have wicks already lit. This product is designed for flameless warming.
- Never leave the candle warmer unattended for extended periods. Utilize the timer function for added safety.
- Use only recommended bulb types (GU10, 50W Halogen) to prevent damage or fire hazard.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged:
- 1 x GEEZO Candle Warmer Lamp (Model G-01)
- 2 x 50W GU10 Halogen Bulbs
- 1 x Instruction Manual
Figure 3: Package contents and main components.
4. Setup
- Unpack: Carefully remove all components from the packaging.
- Install Bulb: Gently screw one of the provided 50W GU10 halogen bulbs into the lamp socket located under the lampshade. Ensure it is securely fastened.
- Place on Surface: Position the candle warmer lamp on a stable, flat, and heat-resistant surface.
- Place Candle: Place your desired scented candle (without lighting the wick) onto the wooden base. The base is designed to accommodate various candle sizes.
- Plug In: Connect the power cord to a standard electrical outlet.
Figure 4: Product details and components for setup.
5. Operating Instructions
5.1 Power On/Off
Press the power button on the inline controller to turn the lamp on or off.
5.2 Brightness and Dimmer Function
The lamp features 4 adjustable brightness levels. Use the '+' and '-' buttons on the inline controller to increase or decrease the light intensity. Higher brightness levels will melt the candle wax faster, resulting in a stronger scent release.
Figure 5: Adjusting brightness levels.
5.3 Timer Function
For safety and convenience, the candle warmer includes a built-in timer. Press the timer button on the inline controller to set the lamp to automatically turn off after 2, 4, or 8 hours. The corresponding indicator light will illuminate to show the selected timer setting.
Figure 6: Timer function for automatic shut-off.
5.4 Height Adjustment
The lamp's height is adjustable to accommodate various candle sizes. To adjust, gently twist the knob on the lamp pole to loosen, slide the lamp head up or down to the desired height, and then twist the knob to tighten and secure it in place. The lamp can be adjusted between 10.2 inches and 13.3 inches in height.
Figure 7: Adjusting lamp height for different candle types.
6. Maintenance
- Cleaning: Ensure the lamp is unplugged and completely cool before cleaning. Wipe the metal and wooden surfaces with a soft, dry cloth. For the glass lampshade, a slightly damp cloth can be used, followed by a dry cloth.
- Bulb Replacement: If the bulb burns out, ensure the lamp is unplugged and the bulb is cool. Carefully unscrew the old GU10 50W halogen bulb and replace it with a new one.
- Wax Management: Over time, the top layer of candle wax may lose its fragrance. You can gently scrape off the top melted layer to expose fresh wax, or pour out the melted wax (once cooled) to refresh the scent.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power cord not plugged in, bulb loose or burnt out. | Check power connection, ensure bulb is screwed in tightly, replace bulb if necessary. |
| No scent or weak scent. | Low brightness setting, old wax layer, candle too large/small. | Increase brightness, remove top layer of wax, ensure candle size is appropriate for lamp height. |
| Lamp flickers. | Loose bulb, faulty bulb. | Tighten bulb, replace bulb. |
8. Specifications
- Model Number: G-01
- Brand: GEEZO
- Product Dimensions: 5.9"D x 5.9"W x 13.7"H
- Adjustable Height: 10.2 inches to 13.3 inches
- Item Weight: 3.05 pounds
- Material: Metal, Wood, Glass
- Finish Type: Lacquered
- Light Source Type: Halogen
- Bulb Base: GU10
- Wattage: 50.00W
- Voltage: 1.1 Volts (Note: This seems to be an error in the provided data, typical voltage for such lamps is 110-120V)
- Control Method: Touch (Inline Controller)
- Special Features: Corded, USB (for power), 4 Brightness Levels, 2/4/8H Timer
- Indoor/Outdoor Usage: Indoor
Figure 8: The lamp accommodates various candle sizes.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your GEEZO Fragrance Candle Warmer Lamp, please refer to the product packaging or contact GEEZO customer service directly. Keep your purchase receipt as proof of purchase.
