1. Introduction
Thank you for choosing the Vamav Evo10 Professional Audio System. This manual provides essential information for the safe and efficient operation of your new audio system. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Instructions
To ensure safe operation and prevent damage, please observe the following precautions:
- Power Source: Connect the unit only to the specified power supply (AC 110-120V). Ensure the power cable is not damaged or pinched.
- Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Water and Moisture: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the system.
- Placement: Place the unit on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
- Cleaning: Disconnect the power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosols.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
3. Package Contents
Carefully unpack your Vamav Evo10 Professional Audio System and verify that all items listed below are present and in good condition.
Overview of the Vamav Evo10 Professional Audio System components, including the subwoofer, column speaker, adjustable pole, remote control, power cable, and speaker cable.
Close-up of the included accessories: infrared remote control, speaker connection cable, and AC power cable.
- Vamav Evo10 Subwoofer Unit
- Column Speaker
- Adjustable Speaker Pole
- Infrared Remote Control
- AC Power Cable
- Speaker Connection Cable
- User Manual (this document)
4. Setup
Follow these steps to set up your Vamav Evo10 Professional Audio System:
- Unpack: Carefully remove all components from their packaging.
- Position Subwoofer: Place the subwoofer unit on a stable, level surface in your desired location.
- Assemble Pole: Insert the adjustable speaker pole into the designated mounting hole on top of the subwoofer. Secure it by tightening the locking mechanism on the pole.
- Mount Column Speaker: Place the column speaker onto the top of the adjustable pole. Ensure it is seated securely.
- Connect Speaker Cable: Connect one end of the provided speaker connection cable to the 'SATELLITE OUT' port on the subwoofer's rear panel and the other end to the input port on the column speaker.
- Power Connection: Ensure the power switch on the subwoofer's rear panel is in the 'OFF' position. Connect the AC power cable to the power inlet on the subwoofer and then plug the other end into a suitable electrical outlet.
Components for assembly: the column speaker, adjustable pole, and the subwoofer with its speaker connection port.
The Vamav Evo10 Professional Audio System fully assembled, showing the column speaker securely mounted on the subwoofer.
5. Operating Instructions
This section details how to operate your Vamav Evo10 audio system.
Detailed view of the Vamav Evo10 subwoofer's rear control panel, highlighting the USB/SD/BT Digital Player, DSP Management Controller, various input/output ports, and the power switch.
5.1 Powering On/Off
- To power on, flip the 'POWER' switch on the rear panel to the 'ON' position. The display on the digital player will illuminate.
- To power off, flip the 'POWER' switch to the 'OFF' position.
5.2 Input Selection
The Evo10 supports multiple input sources:
- USB/SD: Insert a USB drive or SD card into the respective slot on the digital player. The system will automatically switch to USB/SD mode and begin playback.
- Bluetooth (BT): Press the 'MODE' button on the digital player or remote control until 'BT' appears on the display. On your compatible device (smartphone, tablet, laptop), search for 'Vamav Evo10' and pair.
- LINE IN (RCA/XLR): Connect external audio sources (e.g., projector, karaoke machine) using RCA or XLR cables to the 'LINE IN' ports. Select 'LINE' mode using the 'MODE' button.
- MIC IN (XLR/TRS): Connect microphones to the 'MIC IN' ports. Adjust microphone volume using the dedicated 'MIC LEVEL' knob.
5.3 Volume and DSP Control
- Master Volume: Use the large 'MASTER LEVEL' knob to adjust the overall system volume.
- Input Level: Use the 'LINE/MIC LEVEL' knobs to adjust the input volume for specific sources.
- DSP Management Controller: The DSP (Digital Signal Processor) section allows for advanced audio adjustments. Refer to the on-screen menu (if available) or specific controls for detailed settings.
5.4 Remote Control Functions
Infrared remote control for the Vamav Evo10 system, featuring power, mode, EQ, and track controls.
The included remote control provides convenient access to various functions:
- Power Button: Turns the unit on or off.
- MODE: Switches between input sources (USB, SD, Bluetooth, Line).
- EQ: Cycles through preset equalizer modes.
- Volume +/-: Adjusts the master volume.
- Play/Pause, Previous/Next Track: Controls media playback in USB/SD/Bluetooth modes.
- Numeric Buttons: For direct track selection (if supported by media).
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your audio system.
- Cleaning: Regularly wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Ventilation: Keep the ventilation grilles clear of dust and debris. Use a soft brush or vacuum cleaner to gently remove any accumulation.
- Storage: If storing the system for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging.
- Cables: Inspect all cables periodically for signs of wear or damage. Replace any damaged cables immediately.
7. Troubleshooting
If you encounter issues with your Vamav Evo10 system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Outlet malfunction | Ensure power cable is securely connected; Flip power switch to ON; Test outlet with another device. |
| No sound output | Volume too low; Incorrect input selected; Speaker cable disconnected; External device issue | Increase master volume; Select correct input mode; Check speaker cable connection; Verify external device is playing audio. |
| Bluetooth not pairing | System not in BT mode; Device too far; Interference | Ensure system is in BT mode; Move device closer; Turn off other Bluetooth devices nearby. |
| Remote control not working | Dead batteries; Obstruction; Remote not pointed at sensor | Replace batteries; Remove any obstructions; Point remote directly at the IR sensor on the unit. |
8. Specifications
| Feature | Description |
|---|---|
| Model | Evo10 |
| Brand | Vamav |
| Power Output | 1000W |
| Speaker Type | Monitor, Floor-standing |
| Audio Output Mode | Stereo |
| Compatible Devices | Smartphone, Tablet, Laptop, Projector, Karaoke Machine |
| Control Method | Remote Control |
| Power Source | Electric Cable (AC 110-120V) |
| ASIN | B0CGY52FSZ |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Vamav customer service through their official website or the retailer where the product was purchased. Please have your product model (Evo10) and purchase details ready when contacting support.
