Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Generic Oukitel C26 Phone Case and Tempered Glass Screen Protector. Please read these instructions carefully before use to ensure proper installation and optimal performance.
Setup and Installation
1. Phone Case Installation
The phone case is designed with a soft silicone frame and a hard PC backplane, providing robust protection for your Oukitel C26 phone. The thickened four corners and a silicone buffer layer enhance shock absorption.
- Ensure your Oukitel C26 phone is clean and free of dust or debris.
- Align the phone with the case, starting with the top or bottom edge.
- Gently press the phone into the case, ensuring all corners and edges are securely fitted.
- Verify that all ports, buttons, and speakers are accessible through the precision cutouts.
Figure 1: Illustration of the shockproof design with soft silicone frame, hard PC backplane, thickened corners, and silicone buffer layer.
2. Tempered Glass Screen Protector Installation
The included tempered glass screen protector offers 9H high hardness, shatterproof properties, perfect adhesion, and anti-fingerprint features, ensuring 99.9% super transparency.
- Clean the Screen: Use the provided alcohol wipe to thoroughly clean your phone's screen. Remove all dust, smudges, and fingerprints.
- Dry the Screen: Use the microfiber cloth to dry the screen completely. Ensure no lint or dust particles remain.
- Remove Protective Film: Carefully peel off the protective film from the adhesive side of the tempered glass screen protector. Avoid touching the adhesive surface.
- Align the Protector: Align the screen protector with your phone's screen, paying attention to the cutouts for the speaker and camera.
- Apply: Once aligned, gently lower the screen protector onto the screen. It will adhere automatically.
- Remove Bubbles: If any bubbles appear, gently push them towards the edges of the screen using the microfiber cloth or a soft card.
Figure 2: Key features of the tempered glass screen protector.
Figure 3: Visual representation of the screen protector's scratch-proof properties.
Operating Instructions
1. 360° Rotatable Ring Holder
The integrated ring holder provides enhanced grip and serves as a convenient kickstand for media viewing.
- For Grip: Slide your finger through the ring to secure your phone, reducing the risk of accidental drops.
- For Viewing: Rotate the ring 360 degrees and flip it 180 degrees to position your phone at an optimal angle for watching videos or making video calls.
- One-Hand Operation: The ring holder allows for easier one-hand operation, enabling you to reach more areas of your screen comfortably.
Figure 4: Demonstrating improved one-hand reach with the ring holder.
Figure 5: Detailed view of the rotatable ring holder mechanism.
2. Magnetic Car Mount Function
The case features a built-in metal plate compatible with magnetic car mount holders (car mount not included).
- Simply attach your phone, with the case installed, directly to a magnetic car mount. No additional patches are required.
- This feature allows for convenient hands-free use of GPS or music while driving.
- Note: This case does not support wireless charging due to the integrated metal plate. Please remove the case for wireless charging or use a wired charger.
Figure 6: Usage of the magnetic car mount feature.
Maintenance
To ensure the longevity and appearance of your phone case and screen protector, follow these maintenance guidelines:
- Cleaning the Case: Wipe the phone case regularly with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
- Cleaning the Screen Protector: Use a microfiber cloth to gently wipe the screen protector. For smudges, a screen cleaning spray designed for electronics can be applied to the cloth (not directly to the screen).
- Avoid Extreme Temperatures: Do not expose the case or screen protector to extreme heat or cold, as this may affect their material integrity.
- Inspect Regularly: Periodically check the case and screen protector for any signs of wear or damage. Replace if significant damage is observed to maintain optimal protection.
Troubleshooting
Here are solutions to common issues you might encounter:
- Screen Protector Bubbles: If small bubbles appear after installation, gently push them towards the edges with a soft cloth. For persistent bubbles, carefully lift the nearest edge of the protector and reapply, ensuring no dust is trapped underneath.
- Case Not Fitting Properly: Ensure your phone model is Oukitel C26. If it is, remove the phone and re-install the case, making sure all corners snap into place.
- Ring Holder Stiffness: The ring holder may be stiff initially. Repeated use will loosen it slightly. Do not force it beyond its intended range of motion (360° rotation, 180° flip).
- Magnetic Mount Not Holding: Ensure your magnetic car mount is strong enough and properly installed. The case's metal plate is designed for standard magnetic mounts.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Compatible Phone Models | Oukitel C26 |
| Material | Polyurethane (TPU) |
| Special Features | 360° Rotating Ring, Car Magnetic Fixing, Stylish Design |
| Form Factor | Basic Case |
| Item Weight | 2.46 ounces |
| Product Dimensions | 0.39 x 0.39 x 0.39 inches |
| What's in the box | 1*Phone Case, 1*Tempered Glass Screen Protector |
Warranty Information
Specific warranty details are not provided in the product information. Please refer to the retailer's return policy or contact the seller directly for warranty inquiries.
Customer Support
For further assistance or questions regarding your Generic Oukitel C26 Phone Case and Screen Protector, please contact the seller through the platform where the purchase was made. Please have your order details ready for faster service.
