1. Introduction
Welcome to the future of personal hygiene and bathroom comfort. The Loupusuo Smart Toilet L01 PRO is designed to provide an unparalleled experience with its advanced features, intelligent design, and user-friendly operation. This manual will guide you through the installation, operation, and maintenance of your new smart toilet, ensuring optimal performance and longevity.
Figure 1: Loupusuo Smart Toilet L01 PRO with its remote control.
2. Key Features
- Powerful Flushing System: Designed with low water consumption (1.26 gallons per flush) for efficient and thorough cleaning. Includes an emergency flushing function for power outages.
- Smart Sensor Technology: Automatic lid opening and closing, and sensor-controlled flushing for reduced physical contact. The bowl is automatically moistened before use.
- Multiple Cleaning Modes: Features post-cleaning, female cleaning, and massage cleaning. Nozzle position and water pressure are adjustable with five levels for precise cleaning, easily controlled via remote.
- Smart Luxuriously Heated Seat: Adjustable seat and water temperature with four heating levels. An LED display shows the current temperature for enhanced comfort.
- Gentle Smart Toilet Seat & Night Light: Built-in night light for nighttime use. Automatic lid closure reduces noise and protects the user.
- Hot Air Drying: Four-speed air temperature adjustment for comfortable drying after bidet use.
- Contactless LED Digital Display: Real-time monitoring of water and seat temperatures.
- Upgraded Foam Splash Shield: Helps avoid splashing water, isolates odor, and contributes to a cleaner experience.
- Safety Features: Includes a Leakage Protection Switch, a transparent Visualization Filter for easy monitoring, and a Damping Slow Down Mechanism for the seat. The whole machine is IPx4 waterproof.
Figure 2: Contactless LED Digital Display showing water and seat temperatures.
Figure 3: Illustration of Hot Air Drying and Smart Temperature Control Seat.
Figure 4: Overview of safety features including Leakage Protection Switch and IPx4 Waterproofing.
3. Setup and Installation
The Loupusuo Smart Toilet L01 PRO is designed for easy installation. A comprehensive manual and installation videos are provided to assist you. Ensure you have all necessary accessories before beginning.
3.1 Pre-Installation Checks
- Clean the ground and ensure it is dry.
- Check if the ground is horizontal using a level.
- Ensure the sewer line is unblocked.
- Measure the rough-in distance (distance from the wall to the center of the drain hole). It should be ≥300cm (12 inches).
3.2 Installing the Angle Valve
- Wrap thread seal tape around the interface of the foot valve.
- Install the angle valve into the wall connection.
- Put the water flow restrictor into the outlet with the small end inside.
- Drain residual water from the angle valve before connecting the toilet.
3.3 Toilet Placement and Connection
- Install expansion screws into the floor flange.
- Mount the wax ring flange at the drain hole.
- Lift the upper half of the toilet to access the internal connections.
- Carefully install the smart toilet, aligning the flange and the screws with the bottom of the toilet.
- Install the flat washer and nut to secure the toilet to the floor.
- Connect the braided tube to the angle valve, ensuring it is not bent, and tighten it.
- Open the angle valve to the maximum and check for water leaks.
- Plug the power cord into a suitable outlet.
- Plug the remote control into its wall-mounted holder.
Figure 5: Key dimensions for easy installation.
3.4 Installation Video Guide
Video 1: Official Loupusuo Smart Toilet Installation Guide. This video demonstrates the step-by-step process for setting up your toilet, including preparing the area, installing the angle valve, and connecting the toilet to the drain and water supply.
4. Operating Instructions
The Loupusuo Smart Toilet L01 PRO offers various functions for a personalized and hygienic experience. Most features are controlled via the included remote control or integrated sensors.
4.1 Remote Control Overview
The remote control provides full command over all smart toilet functions. Familiarize yourself with the buttons and their corresponding actions.
Figure 6: Detailed layout of the remote control buttons and their functions.
4.2 Automatic Functions
- Lid Opening/Closing: The lid automatically opens when approached and closes after use, reducing physical contact.
- Pre-wetting: The toilet bowl is automatically moistened before use to ensure a cleaner experience.
- Night Light: The built-in night light activates in low-light conditions for convenience and safety during nighttime use.
4.3 Bidet and Drying Functions
- Rear Cleaning: For general posterior cleansing.
- Female Cleaning: A softer, wider spray for feminine hygiene.
- Massage Cleaning: Alternating water pressure for a pulsating massage effect.
- Nozzle Position & Pressure: Adjust the nozzle position (forward/backward) and water pressure (5 levels) using the remote control for optimal comfort and effectiveness.
- Heated Water: Adjust water temperature to your preference using the remote.
- Hot Air Drying: After cleansing, activate the hot air dryer. Adjust the air temperature (4 speeds) for comfortable drying.
Figure 7: Various cleaning modes including Rear, Laundry, Laxative, and Nozzle self-cleaning.
4.4 Flushing Options
- Remote Flush: Press the "Flush" button on the remote control.
- Foot Sensor Flush: A sensor at the base of the toilet allows for touchless flushing by simply swiping your foot past it.
- Side Button Flush: A manual flush button is located on the side of the toilet for convenience.
- Emergency Flush: In case of a power outage, a dedicated emergency flush function is available.
5. Maintenance
Regular maintenance ensures the longevity and hygienic performance of your Loupusuo Smart Toilet L01 PRO.
- Cleaning: The glazed ceramic surface is designed for easy cleaning. Use mild, non-abrasive cleaners.
- Nozzle Self-Cleaning: The bidet nozzle performs an automatic self-cleaning cycle before and after each use.
- Filter Maintenance: The visualization filter is transparent, allowing you to easily observe its condition and replace it when necessary.
- Addressing Flow Issues: If you experience reduced water flow or inadequate bowl rinsing, check the water pressure and the internal lines for any blockages or flow restrictors. Refer to the installation video for accessing internal components if needed.
6. Troubleshooting
If you encounter any issues with your smart toilet, please refer to the common problems and solutions below. For persistent issues, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/display off | Power cord unplugged, circuit breaker tripped, leakage protection switch activated. | Ensure power cord is securely plugged in. Check and reset circuit breaker. Reset the leakage protection switch. |
| Lid not opening/closing automatically | Sensor obstruction, sensor malfunction. | Clear any obstructions around the sensor area. Ensure the sensor is clean. |
| Weak bidet spray or incomplete flush | Low water pressure, clogged nozzle, clogged filter, internal flow restrictor. | Check water supply valve is fully open. Clean the bidet nozzle. Inspect and clean/replace the visualization filter. Refer to manual for internal flow restrictor check. |
| Heated seat/water not working | Heating element issue, temperature setting too low. | Adjust temperature settings via remote. If issue persists, contact customer support. |
| Lid/seat slamming shut | Damping mechanism issue. | Inspect the damping mechanism for any damage or obstruction. Contact customer support if damaged. |
7. Specifications
| Attribute | Detail |
|---|---|
| Model | L01 PRO (2014C) |
| Brand | Loupusuo |
| Product Dimensions (L x W x H) | 26.77"D x 16.54"W x 20.87"H (68cm L x 42cm W x 53cm H) |
| Material | Ceramic (Toilet), Polypropylene (Seat) |
| Item Weight | 88 Pounds |
| Installation Type | Floor Mounted |
| Rough-in Standard | 12 inches (300mm) |
| Water Consumption | 1.26 Gallons Per Flush (GPF) |
| ADA Compliant Height | 17 inches (approximately 43 cm) |
8. Warranty and Support
Loupusuo is committed to providing high-quality, energy-saving, and innovative intelligent bathroom solutions. We prioritize elegant design, excellent function, and user safety and quality.
For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Loupusuo website. Our professional research team and always-on customer team are ready to assist you.
You can also visit the Loupusuo Store on Amazon for more information and support.
