Okin Dewert B.12151 Handset Remote Hand Control User Manual

1. Introduction

This manual provides essential information for the proper use, installation, and maintenance of your Okin Dewert B.12151 Handset Remote Hand Control. This remote is designed as a replacement for hospital bed electric adjustable beds with a 13-pin connection, specifically for Dewert Okin drive systems.

It is primarily used to control and adjust the functions of adjustable beds, including locking and unlocking adjustment functions, and is suitable for care (CARE) and hospital (HOSP) environments.

Figure 1: Okin Dewert B.12151 Handset Remote Control with coiled cable and 13-pin connector.

2. Compatibility

The Okin Dewert B.12151 Handset Remote Control is compatible with specific Okin control box series and Dewert Okin drive systems.

• Direct Replacement: This remote control is a direct replacement for adjustable bed remote control model B.12151.
• Control Box Compatibility: It is also compatible with Okin control box series MC15, MC16, and MC17. Please verify your control box brand and model before ordering or attempting installation.
• Drive System: Designed for use with Dewert Okin drive systems found in electric adjustable beds.

Figure 2: Product label detail, highlighting the B.12151 model number. Ensure this matches your existing remote or required model.

3. Features

The B.12151 handset features a streamlined design with intuitive controls for easy operation of adjustable beds.

• Button Configuration: Equipped with 11 functional buttons for various bed adjustments.
• Indicator Light: Includes an indicator light for operational status.
• Connection Type: Features a 13-pin connection cable for secure attachment to the control box.
• Ergonomic Design: Designed for comfortable handling and ease of use.
• Color: White finish.

Figure 3: Front view showing the 11 functional buttons and an indicator light, and back view showing the clip and OFF/ON switch.

4. Setup

Follow these steps to connect your Okin Dewert B.12151 Handset Remote Control to your adjustable bed system.

1. Power Off: Ensure the adjustable bed system is completely powered off and unplugged from the main power supply before connecting or disconnecting the remote control.
2. Locate Connection Port: Identify the 13-pin connection port on your Okin control box (MC15, MC16, or MC17 series). This port is typically located on the control box unit, which is usually found under the bed frame.
3. Connect Handset: Align the 13-pin connector of the new handset with the port on the control box. Gently push the connector firmly into place until it is securely seated. Do not force the connection.
4. Secure Cable: Ensure the cable is routed safely and is not pinched or tangled with any moving parts of the bed.
5. Power On: Once the handset is securely connected, plug the adjustable bed system back into the main power supply.

Figure 4: Detail of the 13-pin connector, showing its design for secure connection.

5. Operating Instructions

The Okin Dewert B.12151 handset provides intuitive control over your adjustable bed's functions. Familiarize yourself with the button layout for optimal use.

Button Functions:

• Head Up/Down: Buttons with a bed icon showing the head section moving up or down. Use these to raise or lower the head portion of the bed.
• Foot Up/Down: Buttons with a bed icon showing the foot section moving up or down. Use these to raise or lower the foot portion of the bed.
• Combined Head & Foot Up/Down: Buttons with a bed icon showing both head and foot sections moving simultaneously. These typically adjust the entire bed's position.
• Flat Position: A button with a bed icon showing a flat bed. Press this to return the bed to a completely flat position.
• Lock/Unlock: A button with a padlock icon. This function is used to lock or unlock the adjustment capabilities of the bed, preventing accidental changes.
• Power Button: A circular button labeled "POWER". This button typically activates or deactivates the remote's control over the bed.
• CPR Button: A circular button labeled "CPR". This is an emergency function that quickly flattens the bed to facilitate Cardiopulmonary Resuscitation. Use only in emergency situations.

Important Note: Always ensure the bed area is clear of obstructions before making adjustments. Refer to your adjustable bed's main user manual for specific safety guidelines and advanced features.

6. Maintenance

Proper care and maintenance will extend the lifespan of your Okin Dewert B.12151 Handset Remote Control.

• Cleaning: Wipe the surface of the remote with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture. Ensure the remote is dry before use.
• Storage: When not in use, store the remote in a clean, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid kinking, twisting, or pulling the cable excessively. Inspect the cable periodically for any signs of damage, such as fraying or exposed wires.
• Protection: The remote has a protection degree of IPX4, meaning it is protected against splashing water from any direction. However, it is not waterproof; avoid submerging it in liquids.

7. Troubleshooting

If you encounter issues with your Okin Dewert B.12151 Handset, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Okin customer support or your bed manufacturer for further assistance.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your original adjustable bed system or contact Okin directly.

Okin Official Store: Visit the Okin Store on Amazon

For technical assistance or replacement parts, ensure you have your product model number (B.12151) and the model of your control box (MC15, MC16, or MC17 series) ready.