Product Overview
The VeriFone M400 Multiport Berg Adapter and Cable Assembly (MSC445-032-01-A) is designed to provide enhanced connectivity for Verifone Vx820 devices. This assembly includes an Ethernet Latch Lock 6P Din F 2M Cable, facilitating reliable data transmission and connection management. It is an essential component for integrating your Verifone Vx820 terminal into a network infrastructure.
Key features include:
- Ethernet Latch Lock 6P Din F 2M Cable for Verifone Vx820
- Part Number: CBL282-060-01-A
- Cable Length: 2 Meters
Setup Instructions
Follow these steps to properly set up your VeriFone M400 Multiport Berg Adapter and Cable Assembly:
- Unpack the Assembly: Carefully remove the VeriFone M400 Multiport Berg Adapter and Cable Assembly from its packaging. Inspect for any visible damage.
- Identify Ports: Locate the Ethernet Latch Lock 6P Din F connector on the cable and the corresponding port on your Verifone Vx820 device. The adapter itself features multiple Ethernet ports for connection.
- Connect to Verifone Vx820: Insert the Ethernet Latch Lock 6P Din F connector of the cable into the designated port on your Verifone Vx820 terminal. Ensure the latch locks securely into place to prevent accidental disconnection.
- Connect Network Cables: Use standard Ethernet cables (not included) to connect your network devices (e.g., router, switch) to the Ethernet ports on the Multiport Berg Adapter. The adapter typically has multiple numbered ports (e.g., 1, 2, 3) as shown in the image below.
- Secure Placement: Place the adapter in a stable location, ensuring cables are not strained or kinked.
Image: The VeriFone M400 Multiport Berg Adapter showing its three Ethernet ports (labeled 1, 2, 3) and the attached cable assembly extending to the right. This adapter facilitates multiple network connections for compatible devices.
Operating Instructions
Once the VeriFone M400 Multiport Berg Adapter and Cable Assembly is properly connected, its operation is largely passive, facilitating network communication for the connected Verifone Vx820 device.
- Network Connectivity: The adapter acts as a bridge, allowing the Verifone Vx820 to communicate with your network via the connected Ethernet cables.
- Data Transmission: Data will flow through the adapter to and from the Verifone Vx820 terminal, enabling transactions and other network-dependent functions.
- Status Indicators: Some network devices or the Verifone Vx820 itself may have LED indicators to show network activity or connection status. Refer to the Verifone Vx820 manual for specific indicator meanings.
Maintenance
The VeriFone M400 Multiport Berg Adapter and Cable Assembly requires minimal maintenance to ensure optimal performance and longevity.
- Cleaning: Periodically wipe the adapter and cable with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these can damage the components.
- Cable Inspection: Regularly inspect the cable for any signs of wear, fraying, or damage. Ensure the connectors are clean and free of debris.
- Environmental Conditions: Store and operate the adapter in a dry environment, away from extreme temperatures, direct sunlight, and excessive dust.
- Secure Connections: Ensure all cable connections remain secure. Loose connections can lead to intermittent network issues.
Troubleshooting
If you encounter issues with your VeriFone M400 Multiport Berg Adapter and Cable Assembly, consider the following troubleshooting steps:
- No Network Connectivity:
- Verify that the Ethernet Latch Lock cable is securely connected to both the Verifone Vx820 and the adapter.
- Ensure that the Ethernet cables from your network devices are properly plugged into the adapter's ports.
- Check the status of your network router or switch to confirm it is operational.
- Try using different Ethernet cables to rule out faulty cables.
- Intermittent Connection:
- Inspect all cable connections for looseness.
- Ensure the cable is not bent sharply or pinched, which can damage internal wires.
- Check for electromagnetic interference from other electronic devices.
- Physical Damage:
- If the adapter or cable shows signs of physical damage, discontinue use and contact support for replacement.
Specifications
| Feature | Detail |
|---|---|
| Brand | VeriFone |
| Model Number | MSC445-032-01-A |
| Compatible Devices | Verifone Vx820, Router |
| Cable Type | Multiport Berg Adaptor, Ethernet Latch Lock 6P Din F 2M Cable |
| Connector Type | Ethernet |
| Cable Length | 2 Meters |
| Item Weight | 1 Pounds |
Warranty Information
This VeriFone product is covered by a standard manufacturer's warranty. For specific details regarding warranty terms, duration, and claim procedures, please refer to the documentation provided with your original purchase or visit the official VeriFone website. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your VeriFone M400 Multiport Berg Adapter and Cable Assembly, please contact VeriFone customer support. Contact information can typically be found on the official VeriFone website or in the product packaging.
