EXERPEUTIC 4059

EXERPEUTIC 400 Lb. Capacity Heavy-Duty 2-in-1 Walking/Jogging Treadmill

Model: 4059 - Instruction Manual

1. Important Safety Instructions

Please read all instructions carefully before using this treadmill. Retain this manual for future reference.

  • Weight Capacity: This treadmill is designed for users up to 400 pounds (181 kg). Do not exceed this weight limit.
  • Placement: Place the treadmill on a flat, stable surface. Ensure adequate clear space around the treadmill for safe operation and emergency dismount.
  • Power: Connect the treadmill to a properly grounded outlet. Do not use extension cords.
  • Safety Key: Always attach the safety key clip to your clothing before starting the treadmill. In case of an emergency or if you fall, the safety key will detach, immediately stopping the treadmill.
  • Children and Pets: Keep children and pets away from the treadmill during operation.
  • Medical Conditions: Consult your physician before starting any exercise program, especially if you have pre-existing medical conditions.
  • Maintenance: Regularly inspect the treadmill for wear and tear. Do not operate if damaged.

2. Setup and Assembly

The EXERPEUTIC 2-in-1 Treadmill is designed for minimal assembly, allowing for quick setup.

Unpacking and Initial Placement

  1. Carefully remove the treadmill from its packaging.
  2. Place the treadmill on a level surface in your desired exercise area.
  3. Ensure the power cord is easily accessible to a grounded electrical outlet.

Handlebar Configuration

This treadmill features a 2-in-1 design, allowing use with handlebars for jogging/running or folded down for under-desk walking.

  • For Jogging/Running (Handlebars Up): Lift the handlebars into the upright position until they securely lock into place. This mode supports speeds up to 4 mph.
  • For Under-Desk Walking (Handlebars Down): Fold the handlebars down. This configuration is ideal for walking at speeds up to 3 mph.
EXERPEUTIC 2-in-1 Treadmill in both running and walking configurations

Image: The EXERPEUTIC 2-in-1 Treadmill shown with handlebars up for running and handlebars folded down for under-desk walking. This illustrates the versatile design of the unit.

EXERPEUTIC 2-in-1 Treadmill in walking mode under a desk and running mode with handlebars

Image: A visual representation of the treadmill in its two primary modes: walking mode positioned under a standing desk, and running mode with the handlebars extended for support.

3. Operating Instructions

Getting Started

  1. Plug the power cord into a grounded electrical outlet.
  2. Attach the safety key to the designated slot on the treadmill console and clip the other end to your clothing. The treadmill will not operate without the safety key in place.
  3. Step onto the treadmill belt.

Using the LED Display and Remote Control

The treadmill features a multifunctional LED display and comes with a remote control for easy operation.

EXERPEUTIC Treadmill LED display and remote control

Image: A close-up view of the treadmill's LED display, showing readouts for time, speed, distance, and calories. The included remote control is also visible, used for adjusting settings.

  • Power On/Off: Use the power button on the remote control to turn the treadmill on or off.
  • Start/Stop: Press the 'Start' button on the remote to begin movement. Press 'Stop' to halt the belt.
  • Speed Adjustment: Use the '+' and '-' buttons on the remote to increase or decrease the belt speed.
  • Display Modes: The LED display automatically cycles through Time, Speed, Distance, and Calories.
  • Pre-programmed Options: The treadmill includes 6 pre-programmed workout options. Refer to the remote control instructions for selecting these programs.

Operating Modes and Speed Limits

  • Running Mode (Handlebars Up): Maximum speed of 4 miles per hour (6.4 km/h).
  • Walking Mode (Handlebars Down/Under Desk): Maximum speed of 3 miles per hour (4.8 km/h).

4. Maintenance

Regular maintenance ensures the longevity and safe operation of your treadmill.

  • Cleaning: Wipe down the treadmill with a damp cloth after each use to remove sweat and dust. Do not use abrasive cleaners.
  • Belt Lubrication: The walking belt requires periodic lubrication to reduce friction and extend its lifespan. Refer to the specific lubrication instructions provided with your treadmill or contact customer support for guidance.
  • Belt Adjustment: If the walking belt begins to shift to one side, it may require adjustment. Consult the detailed instructions in the full user manual for proper belt centering procedures.
  • Inspection: Periodically check all bolts and screws to ensure they are tight. Inspect the power cord for any damage.

5. Troubleshooting

If you encounter issues with your treadmill, refer to the following common troubleshooting steps.

  • Treadmill Does Not Power On:
    • Ensure the power cord is securely plugged into a grounded outlet.
    • Check if the safety key is correctly inserted into the console.
    • Verify the circuit breaker in your home has not tripped.
  • Belt Stops Unexpectedly:
    • Confirm the safety key is still attached to your clothing and properly inserted.
    • Ensure the treadmill is not overloaded beyond its 400 lb capacity.
  • Unusual Noises:
    • Check for any loose parts or foreign objects on or under the belt.
    • Lubricate the belt if it sounds dry or squeaky.
  • Belt Slipping or Sticking:
    • The belt may require tension adjustment. Refer to the maintenance section or full manual.
    • Ensure the belt is properly lubricated.

If these steps do not resolve the issue, please contact customer support.

6. Product Specifications

Detailed specifications for the EXERPEUTIC 400 Lb. Capacity Heavy-Duty 2-in-1 Treadmill, Model 4059.

  • Model Number: 4059
  • Product Dimensions (L x W x H): 134.62 x 61.98 x 109.22 cm (53 x 24 x 43 inches)
  • Packed Size (L x W x H): 139.7 x 63.5 x 12.06 cm (55 x 25 x 4.75 inches)
  • Item Weight: 23.13 kg (51 lbs)
  • Maximum Weight Capacity: 400 Pounds (181 kg)
  • Motor Horsepower: 2.75 HP
  • Maximum Speed (Handlebars Up): 4 mph (6.4 km/h)
  • Maximum Speed (Handlebars Down): 3 mph (4.8 km/h)
  • Walking Area: Approximately 15.75 x 43 inches (40 x 109 cm)
  • Frame Material: Alloy Steel
  • Display Type: LED (shows Calories Burned, Distance, Speed, Time)
  • Number of Programs: 6
  • Power Source: Corded Electric
  • Special Features: Compact Design, Foldable, Heavy Duty, Lightweight, Built-in Wheels, Phone/Tablet Holder
  • Included Components: Remote Control, Safety Key
EXERPEUTIC Treadmill showing 400 lb capacity and belt dimensions

Image: The treadmill's walking surface with measurements indicating a 16-inch width and 43.5-inch length, highlighting its 400 lb weight capacity.

EXERPEUTIC Treadmill folded for storage with dimensions

Image: The treadmill shown in its folded, space-saving configuration, with dimensions of 53 inches long, 24 inches wide, and 4.75 inches high. Built-in wheels for easy transportation are also visible.

EXERPEUTIC Treadmill highlighting low-noise motor and other features

Image: An illustration of the treadmill's low-noise motor and other key features such as low-impact design, built-in wheels, a phone/tablet holder, and the benefit of no assembly required.

7. Warranty and Support

For warranty information and customer support, please contact the manufacturer.

  • Brand: EXERPEUTIC
  • Manufacturer: Xplus Outdoor Inc.
  • Contact: Refer to the contact information provided on the product packaging or the official EXERPEUTIC website for the most current support details.

Please have your model number (4059) and purchase date available when contacting support.

© 2023 EXERPEUTIC. All rights reserved.