1. Introduction
The LUCCI AIR Array ceiling fan is designed to provide efficient air circulation and illumination for rooms up to 35 m². This modern fan features a durable and quiet DC motor, offering 6 speed settings and a reversible summer/winter mode for year-round comfort. It includes an integrated LED light with a replaceable GX53 bulb (warm white 3000K, 1200 lumens, 12W) and is conveniently controlled via a remote. The fan's ultra-flat design, with a mounting height of only 20 cm, makes it ideal for rooms with ceiling heights up to 2.5 meters.
Please read this manual thoroughly before installation and operation to ensure safe and correct use of your LUCCI AIR Array ceiling fan.
2. Safety Information
Important: Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or repair.
- Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
- Ensure the mounting structure can support the weight of the fan (approximately 6.5 kg).
- Maintain a minimum clearance of 2.3 meters (7.5 feet) from the floor to the fan blades.
- Do not insert any objects into the path of the rotating blades.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
3. Setup and Installation
The LUCCI AIR Array ceiling fan is designed for easy installation. Follow these general steps. Refer to the detailed installation diagrams provided in the separate installation guide for specific wiring and mounting instructions.
- Prepare for Installation: Ensure power is off at the circuit breaker. Clear the work area.
- Mounting Bracket: Secure the mounting bracket to a ceiling joist or a suitable, approved support structure using appropriate hardware.
- Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram in your installation guide. Ensure all connections are secure.
- Attach Motor Housing: Lift the fan motor housing and attach it to the mounting bracket, securing it with the provided screws.
- Install Blades: Attach the three ABS blades to the motor housing using the provided screws. Ensure they are firmly secured.
- Install LED Light: Insert the GX53 LED bulb into its socket. If desired, the included metal cap can be used to cover the light if illumination is not required. Attach the light cover to the fan.
- Remote Control Batteries: Insert 2 AAA batteries (not included) into the remote control.
Figure 1: Overall view of the LUCCI AIR Array 137cm 3-Blade Ceiling Fan.
Figure 2: Close-up view of the fan's motor housing and integrated light fixture. The light can be covered with a metal cap if not needed.
4. Operating Instructions
The LUCCI AIR Array ceiling fan is operated using the included remote control. Ensure the remote has 2 AAA batteries installed.
Figure 3: Remote control for the LUCCI AIR Array Ceiling Fan.
Remote Control Functions:
- Power Button (⏻): Turns the fan ON or OFF.
- Fan Speed Buttons (1-6): Adjusts the fan speed from 1 (lowest) to 6 (highest).
- Light Button (💡): Turns the LED light ON or OFF. Pressing repeatedly cycles through 3 dimmable light levels.
- Summer/Winter Mode (⇆): Toggles the fan direction. In summer mode (downward airflow), it creates a cooling breeze. In winter mode (upward airflow), it helps circulate warm air trapped near the ceiling.
- Timer Buttons (1H, 4H, 8H): Sets the fan to automatically turn off after 1, 4, or 8 hours.
Memory Function: The fan's memory function saves the last fan speed and light setting when the unit is switched off via a wall switch, restoring them upon power-up.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Periodically wipe the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure the fan is completely dry before operating.
- Bulb Replacement: The integrated LED light uses a replaceable GX53 bulb. To replace, ensure power is off, carefully remove the light cover, and twist out the old bulb. Insert the new GX53 bulb and reattach the cover.
- Blade Balance: If the fan wobbles excessively, check that all blade screws are tight and that the blades are not bent or damaged. A blade balancing kit (not included) can be used if necessary.
- No Lubrication Required: The fan's DC motor is permanently lubricated and does not require additional oiling.
6. Troubleshooting
If you encounter issues with your LUCCI AIR Array ceiling fan, consult the following table before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Remote control batteries are dead or incorrectly inserted; Loose wiring connection. | Check circuit breaker and wall switch; Replace remote batteries; Ensure wiring connections are secure (consult an electrician if unsure). |
| Fan wobbles excessively | Loose mounting screws; Unbalanced blades; Bent blade. | Ensure all mounting and blade screws are tight; Check blades for damage; Use a blade balancing kit. |
| Light does not work | Bulb is faulty or loose; Wiring connection to light is loose. | Check if the GX53 bulb is properly seated or needs replacement; Verify light wiring connections. |
| Remote control not responding | Dead batteries; Obstruction between remote and receiver; Remote not paired (if applicable). | Replace batteries; Ensure clear line of sight to the fan; Refer to pairing instructions if the remote needs re-pairing. |
7. Product Specifications
| Model Name | Array |
| Model Number | 9333509192800 |
| Brand | LUCCI AIR |
| Manufacturer | Beacon Lighting |
| Dimensions (L x W x H) | 137 cm x 137 cm x 20 cm |
| Fan Diameter | 137 cm |
| Mounting Height | 20 cm (ultra-flat) |
| Blades | 3, ABS Plastic |
| Motor Type | DC Motor |
| Fan Speeds | 6 |
| Power Consumption (Fan) | 4-35 W |
| Light Type | Integrated LED (GX53 bulb) |
| Light Wattage | 12 W |
| Luminous Efficacy | 1200 lumens |
| Color Temperature | 3000 K (Warm White) |
| Dimmable | Yes (3 levels via remote) |
| Control Method | Remote Control |
| Voltage | 240 Volts |
| Recommended Room Size | Up to 35 m² |
| Remote Batteries Required | 2 x AAA (not included) |
8. Warranty and Support
LUCCI AIR provides a commitment to quality for its products. Spare parts for this model are available for a period of 5 years from the date of purchase.
For warranty claims, technical support, or inquiries regarding spare parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related requests.
