BRILONER LED Dimmable Floor Lamp Model 1472015 User Manual

Introduction

This user manual provides essential information for the safe and efficient operation of your BRILONER LED Dimmable Floor Lamp, Model 1472015. This versatile lamp is designed to provide warm white light (3000K) with adjustable brightness, making it suitable for various settings such as living rooms, bedrooms, and home offices. Please read these instructions carefully before use and retain them for future reference.

Figure 1: BRILONER LED Dimmable Floor Lamp, Model 1472015. This image shows the complete black floor lamp with its curved arm and rectangular LED light head, standing on a round base.

Safety Instructions

• Ensure the power supply voltage matches the lamp's requirements (230 Volts).
• Do not attempt to disassemble or modify the lamp. Integrated LED components are not user-replaceable.
• Keep the lamp away from water and moisture.
• Place the lamp on a stable, level surface to prevent tipping.
• Do not cover the lamp with any materials while it is in operation.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.

Package Contents

Verify that all components are present and undamaged upon opening the package.

• 1 x BRILONER LED Dimmable Floor Lamp (Model 1472015)
• 1 x User Manual

Assembly and Setup

1. Carefully unpack all components from the packaging.
2. Assemble the lamp pole sections if they are separate, ensuring they are securely fastened.
3. Attach the lamp head to the pole, if not pre-assembled.
4. Place the lamp on a flat, stable surface.
5. Plug the power cord into a standard 230V electrical outlet.

Figure 2: Lamp Dimensions. This diagram illustrates the overall dimensions of the floor lamp: 1265mm height, 210mm base diameter, and 660mm arm depth.

Operation

The BRILONER LED Floor Lamp features intuitive touch control for power and dimming.

Power On/Off and Dimming

1. To Turn On/Off: Lightly touch the designated touch sensor on the lamp head (indicated by a power symbol).
2. To Adjust Brightness: After turning on, repeatedly touch the sensor to cycle through the 4 dimming levels: 100%, 75%, 50%, and 25%.
3. Memory Function: The lamp will remember the last brightness setting used when it is turned off and will resume that setting upon being turned back on.

Figure 3: Touch Sensor Location. This image highlights the touch-sensitive power symbol located on the lamp head, used for both turning the lamp on/off and adjusting brightness.

Figure 4: Dimming Levels. This image visually represents the four distinct brightness levels (100%, 75%, 50%, 25%) achievable by repeatedly touching the sensor.

Adjusting the Lamp Head

The lamp features a flexible and pivotable head, allowing you to direct the light precisely where needed. Gently adjust the lamp head to your desired angle.

Figure 5: Flexible Lamp Head. This image demonstrates the rotatable and pivotable nature of the lamp head, showing it adjusted to different angles.

Care and Maintenance

• Always disconnect the lamp from the power outlet before cleaning.
• Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishing agents, as these may damage the finish.
• Ensure no liquid enters the electrical components.

Troubleshooting

Technical Specifications

Contact and Support

For further assistance, technical support, or warranty inquiries, please contact your retailer or the manufacturer directly.

Manufacturer: Briloner Leuchten
Please refer to the product packaging or the manufacturer's official website for the most up-to-date contact information.