1. Introduction
Thank you for choosing the BRILONER LED Bathroom Mirror Light. This manual provides important information regarding the safe installation, operation, and maintenance of your new light fixture. Please read these instructions carefully before installation and retain them for future reference.
This LED mirror light is designed for modern bathrooms, offering neutral white light and protection against splashes, making it suitable for damp environments.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national wiring regulations. Ensure the main power supply is switched off before commencing any installation or maintenance work.
- IP44 Rating: This product is rated IP44, meaning it is protected against solid objects over 1mm and against splashing water from any direction. It is suitable for bathroom zones 2 and outside zones. Do not install in bathroom zone 0 or 1.
- Voltage: This fixture operates on 230 Volts (AC). Verify your household voltage matches this requirement.
- Light Source: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the LED module.
- Cleaning: Always disconnect power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Damage: Do not operate the fixture if any part is damaged. Contact customer support for assistance.
3. Package Contents
Please check that all components are present and undamaged:
- BRILONER LED Bathroom Mirror Light (Model 2116014)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
4. Product Overview and Dimensions
The BRILONER LED Bathroom Mirror Light features a sleek design with a matt chrome finish, providing efficient and uniform illumination.
Image 1: Front view of the BRILONER LED Bathroom Mirror Light.
Image 2: Key features highlighting 4000K neutral white light and IP44 splash protection.
Image 3: Dimensional drawing of the light fixture (400mm length, 65mm height, 45mm depth).
5. Installation Guide
Important: Ensure the main power supply is disconnected before installation. If you are unsure about electrical installation, consult a qualified electrician.
5.1 Preparation
- Switch off the main power supply at the circuit breaker.
- Unpack the light fixture and check for any damage.
- Identify the desired mounting location above or beside your mirror. Ensure there is sufficient space and a suitable electrical connection point.
5.2 Mounting the Fixture
- Carefully detach the mounting bracket from the light fixture, if applicable.
- Hold the mounting bracket against the wall at the desired position and mark the drilling points.
- Drill holes at the marked points using an appropriate drill bit for your wall type.
- Insert the provided wall plugs into the drilled holes.
- Secure the mounting bracket to the wall using the provided screws.
5.3 Electrical Connection
Image 4: Internal wiring compartment for electrical connections.
- Connect the household electrical wires to the terminal block inside the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth (E) if present.
- Ensure all connections are secure and properly insulated.
- Carefully tuck the wires into the wiring compartment, ensuring no wires are pinched.
5.4 Final Assembly
- Attach the light fixture body to the mounted bracket, ensuring it is securely fastened.
- Restore power at the circuit breaker.
- Test the light to ensure it functions correctly.
Image 5: Example installation with two lights mounted vertically beside a mirror.
Image 6: Example installation with one light mounted horizontally above a mirror.
6. Operation
The BRILONER LED Bathroom Mirror Light is operated via your standard wall switch. Simply toggle the switch to turn the light on or off.
7. Maintenance and Care
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
- Light Source: The integrated LED light source is designed for a long lifespan and does not require replacement.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply | Check the circuit breaker and wall switch. Ensure power is restored. |
| Loose wiring connection | Disconnect power and check electrical connections. If unsure, consult a qualified electrician. | |
| Damaged LED module | The LED module is integrated. If damaged, the entire fixture may need replacement. Contact customer support. | |
| Light flickers | Unstable power supply | Consult a qualified electrician to check your electrical system. |
| Loose connection | Disconnect power and check electrical connections. |
9. Technical Specifications
| Brand | BRILONER |
| Model Number | 2116014 |
| Dimensions (L x W x H) | 40 x 4.5 x 6.5 cm |
| Weight | 147 g |
| Material | Plastic |
| Finish Type | Chrome Matt |
| Voltage | 230 Volts (AC) |
| Wattage | 7 Watts |
| Luminous Flux | 690 lumens |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Color Rendering Index (CRI) | Ra >= 80 |
| Lifespan | 25,000 hours |
| Protection Class | IP44 (Splash-proof) |
| Energy Efficiency Class | F |
| Installation Type | Wall Mount |
10. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For technical assistance or inquiries, please visit the BRILONER website or contact their customer service department.
