QttyElok WiFi Tuya Access Control System with Electric Strike Lock

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the QttyElok WiFi Tuya Access Control System with Electric Strike Lock. This system offers secure access control using RFID cards, passwords, and the Tuya APP, suitable for various door types.

2. Product Overview

2.1. Components

• WiFi Tuya APP Access Control Keypad
• Electric Strike Lock (NC type)
• DC12V Power Supply Control
• Door Exit Button
• RFID Keyfobs (10 pieces)

2.2. Key Features

• Supports 10,000 user capacity.
• Multiple verification modes: RFID Cards, Password, RFID Card + Password, Tuya APP.
• Tuya APP for user management, remote unlocking, and viewing unlock records.
• Dual frequency support: 125KHz and 13.56MHz.
• IP68 waterproof touch screen keypad with backlight and work indicator.
• NC type (fail-safe) electric strike lock, suitable for wooden and metal doors.

2.3. Product Images

3. Setup and Installation

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended to consult a professional for electrical wiring if you are unfamiliar with the process.

3.1. Wiring Diagram

3.2. Electric Strike Lock Installation

The electric strike lock is an NC (Normally Closed) type, meaning it is locked when power is on and unlocked when power is off (fail-safe). It is suitable for wooden and metal doors.

4. Operating Instructions

This section details how to operate your QttyElok Access Control System using the Tuya APP, RFID cards, and passwords.

4.1. Tuya APP Operations

Download the Tuya Smart App from smart.tuya.com/download or by scanning the QR code provided in the product images.

4.1.1. Add Device to Tuya APP

1. Turn on the Tuya APP.
2. On the keypad, enter * 123456 # 041 #.
3. In the APP, click "Add Device".
4. Enter your WiFi password.
5. Confirm device addition.

4.1.2. Remote Unlock

From the Tuya APP interface, press the unlock icon to remotely open the door.

4.1.3. Set Temporary Password

Navigate to the temporary password section in the Tuya APP to generate and set a temporary password. Temporary passwords are valid for 6 hours and can be used once.

4.1.4. Share Password

Temporary passwords can be shared via WeChat, Message, or copied directly from the Tuya APP.

4.1.5. Add Private Password

1. In the APP, go to "Member manage" and click "Add".
2. Input a 6-digit code.
3. Click "Save".

4.1.6. Add Card via APP

1. In the APP, go to "Member manage" and click "Add" under the Card section.
2. Swipe the RFID card on the keypad.
3. Click "Done" in the APP.

4.1.7. Unlock with RFID Card

Swipe a registered RFID card over the keypad's card area to unlock the door.

4.1.8. Unlock with Private Password

Enter your private 6-digit password followed by # on the keypad to unlock.

4.1.9. Set Door Keep Open Mode

In the Tuya APP settings, enable "Door keep open" and configure the desired time frame (e.g., 08:00-20:00) or select "Forever".

4.1.10. View Unlock Records

Click on the reminder information in the Tuya APP to access and view the log of all unlock events.

4.2. Keypad Programming Operations

The default programming password is 123456. All programming sequences start with * programming password #.

4.2.1. Set Management Card

To add a management card: * programming password # 7 #, then swipe the card. For example: * 123456 # 7 #, then swipe card.

4.2.2. Delete Management Card

To delete a management card: * programming password # 8 #, then swipe the card. For example: * 123456 # 8 #, then swipe card.

4.2.3. Add User Card (Method 1)

To add a user card: * programming password # 1 #, then swipe the card. For example: * 123456 # 1 #, then swipe card.

4.2.4. Add User Card (Method 2)

To add a user card with a specific user code: * programming password # 1 user code #, then swipe the card. For example: * 123456 # 1 002 #, then swipe card.

4.2.5. Delete User Card (Method 1)

To delete a user card by swiping: * programming password # 3 #, then swipe the card. For example: * 123456 # 3 #, then swipe card.

4.2.6. Delete User Card (Method 2)

To delete a user card by card number: * programming password # 3 card number #. For example: * 123456 # 3 0008719254 #.

4.2.7. Delete User Card (Method 3)

To delete a user card by user code: * programming password # 3 user code #. For example: * 123456 # 3 002 #.

4.2.8. Delete All Users

To delete all registered users: * programming password # 4 programming password #. For example: * 123456 # 4 123456 #.

4.2.9. Turn On/Off Combined Door Opening Method

To turn on the combined door opening method (RFID card + password): * programming password # 0 21 #. To turn off: * programming password # 0 20 #. For example: * 123456 # 0 21 #.

4.2.10. Turn On/Off Normally Open Mode

To turn on normally open mode: Swipe a card to open the door, then press 0 #. To turn off: Swipe a card or press a password to open the door, then the normally open mode will exit.

4.2.11. Default Public Unlocking Password

The default public unlocking password is 7890.

4.2.12. Modify Public Unlocking Password

To modify the public unlocking password: * programming password # 2 new password # new password #. For example: * 123456 # 2 3698 # 3698 #.

4.2.13. Modify Programming Password

To modify the programming password: * programming password # 9 new programming password # new programming password #. For example: * 123456 # 9 456789 # 456789 #.

4.2.14. Restore Factory Settings

To restore factory settings: * new programming password # 6 new programming password #. For example: * 456789 # 6 456789 # (if programming password was changed to 456789).

5. Maintenance

• Regularly clean the keypad surface with a soft, damp cloth. Avoid abrasive cleaners.
• Ensure all wiring connections are secure and free from corrosion.
• Periodically test the system's functionality, including remote unlock, card access, and password entry.
• Keep your programming password confidential and change it periodically for enhanced security.

6. Troubleshooting

• System not responding: Check power supply connections and ensure the unit is receiving power.
• RFID card not working: Ensure the card is correctly registered in the system. Try re-adding the card via the Tuya APP or keypad programming.
• Password not working: Verify the password entered is correct. Check if the public unlocking password has been modified.
• Tuya APP connectivity issues: Ensure the keypad is within WiFi range and your network is stable. Re-add the device to the Tuya APP if necessary.
• Door not locking/unlocking: Inspect the electric strike lock for any obstructions or damage. Verify wiring connections to the lock and power supply.
• Keypad indicator lights: A green light typically indicates a successful operation, while a red light indicates an error or invalid input.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your product packaging or visit the official QttyElok website. Keep your purchase receipt for warranty claims.