Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light, Model 1. This device features dual charging capabilities (solar and USB), an 8000mAh battery for extended endurance, and motion-sensing functionality for enhanced security and convenience. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
Product Overview
The FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light is designed for versatile indoor and outdoor illumination. Key features include:
- Dual Charging: Supports both solar power and USB (Type-C) charging for continuous operation, even in low sunlight conditions.
- Long Endurance Battery: Equipped with an 8000mAh battery, providing up to three months of use on a full charge (based on 10 activations per day, 30 seconds each).
- Motion Sensor: Detects motion up to 32.8 feet with a 120° sensing angle, activating the light when movement is detected.
- High Brightness: Delivers 3000 lumens of cool white LED light.
- Easy Installation & Removal: The lamp body can be easily detached from its mounting base for convenient USB charging.
- Separate Solar Panel: The solar panel is connected via a 16.4-foot cable, allowing flexible placement for optimal sun exposure.
- Two Lighting Modes: Adaptable lighting behavior for different needs.
Package Contents
Please verify that all components are present:
- FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light unit
- Solar Panel with 16.4ft cable
- Mounting Hardware (screws, wall anchors)
- USB Type-C Charging Cable (not explicitly listed but implied by USB charging)
- User Manual
Setup
Follow these steps for proper installation:
- Choose a Location: Select a mounting location for the flood light that provides the desired illumination coverage. For the solar panel, choose a spot that receives direct sunlight for several hours daily to ensure efficient charging. The 16.4ft cable allows flexibility in solar panel placement.
- Mount the Base Plate: Use the provided screws and wall anchors to securely fix the mounting base plate to the wall or desired surface.
- Attach the Light Body: Align the light unit with the mounted base plate and press it firmly until it clicks into place. The light body is designed for easy installation and removal via a bottom plate buckle.
- Mount the Solar Panel: Secure the solar panel in its chosen location using appropriate mounting hardware. Ensure the cable is routed safely and connected to the light unit.
- Initial Charge: Before first use, it is recommended to fully charge the light. This can be done by exposing the solar panel to direct sunlight for at least two days, or by removing the light body and charging it via the USB Type-C port for approximately 10 hours.
Operating Instructions
The flood light features two distinct operating modes:
- Mode 1 (Default): The light will only activate when motion is detected in a dark environment (after dusk). It will illuminate at 100% brightness for 30 seconds, then turn off if no further motion is detected.
- Mode 2: The light will activate when motion is detected, regardless of ambient light conditions (day or night). It will illuminate at 100% brightness for 30 seconds, then turn off if no further motion is detected. This mode is useful for areas requiring illumination during daylight hours upon motion.
To switch between modes, locate the small button or switch on the light unit, typically near the motion sensor. Pressing this button will cycle through the modes. The light may flash to indicate a successful mode change.
Video: Lighting Mode Description
Video: This video demonstrates how to switch between the two lighting modes and explains their functionality.
Charging the Device
The FLITI flood light offers two charging methods:
- Solar Charging: Ensure the solar panel is positioned in an area that receives maximum direct sunlight. The panel will automatically charge the internal battery during the day.
- USB Charging: For faster charging or during periods of insufficient sunlight (e.g., winter, prolonged cloudy weather), detach the light body from its mounting base and connect it to a standard USB power adapter using a Type-C cable. A full USB charge takes approximately 10 hours.
Maintenance
Regular maintenance ensures optimal performance:
- Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, snow, or debris that may obstruct sunlight and reduce charging efficiency.
- Battery Care: If the light is used in an area with consistently low sunlight, especially during winter, consider performing a full USB charge once every few months to maintain battery health and ensure continuous operation.
- Inspect Connections: Occasionally check the cable connection between the solar panel and the light unit to ensure it is secure and free from damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on or has short endurance. | Insufficient battery charge. Solar panel not receiving enough sunlight. | Ensure solar panel is clean and positioned for maximum direct sunlight. Perform a full USB charge (10 hours). |
| Motion sensor not activating light. | Incorrect operating mode selected. Obstruction blocking sensor. | Verify the light is in the desired operating mode (Mode 1 for night, Mode 2 for day/night). Clear any obstructions from the sensor's path. |
| Light flickers or is dim. | Low battery charge. | Charge the device fully via solar or USB. |
| Solar panel cable connection issues. | Loose or damaged cable connection. | Ensure the cable is securely connected to both the solar panel and the light unit. Inspect for any visible damage to the cable. |
Specifications
| Feature | Detail |
|---|---|
| Brand | FLITI |
| Model Number | 1 |
| Power Source | Solar Powered, USB Rechargeable |
| Battery Capacity | 8000mAh |
| Brightness | 3000 Lumens |
| Sensing Distance | 32.8 ft |
| Sensing Angle | 120° |
| Solar Panel Cable Length | 16.4 ft |
| Material | Acrylonitrile Butadiene Styrene |
| Water Resistance Level | Waterproof (IP68 implied from A+ content) |
| Light Color | Cool White |
| Item Dimensions (L x W x H) | 14"L x 10"W x 8"H |
| Item Weight | 0.62 Kilograms |
Warranty Information
This FLITI product comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Support
For technical assistance, warranty claims, or any questions regarding your FLITI Rechargeable Battery Motion Sensor Outdoor Flood Light, please contact the manufacturer's customer support. Refer to the product packaging or the retailer's website for specific contact details.