Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your PERLESMITH Mobile TV Cart (Model: PSTVMC01). Please read these instructions carefully before beginning assembly to ensure safe and proper use of the product. Retain this manual for future reference.
Important Safety Information
Failure to follow these safety instructions may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact customer support.
- Do not exceed the maximum weight capacity of 132 lbs (60 kg).
- Ensure the TV size is within the recommended range of 32-85 inches.
- Verify VESA compatibility (Max VESA 600x400mm) before assembly.
- Always use the locking wheels when the cart is stationary to prevent accidental movement.
- Do not allow children to climb on or play with the TV cart.
- Perform regular checks to ensure all screws and connections are secure.
Parts List
Before assembly, ensure all parts are present and undamaged. Refer to the included hardware pack for specific component identification.
- Base with Wheels
- Vertical Support Columns (2)
- TV Mounting Brackets (2)
- VESA Adapter Plates (if applicable)
- Hardware Kit (various screws, washers, spacers)
- Cable Management Clips
- Assembly Tools (e.g., Allen wrench, open-end wrench)
- Instruction Manual
Setup Instructions
Follow these steps to assemble your mobile TV cart:
- Assemble the Base: Attach the vertical support columns to the wheeled base using the provided screws. Ensure all connections are tight and stable.
- Attach TV Mounting Brackets: Secure the TV mounting brackets to the back of your television. Select the appropriate VESA screws and spacers for your TV model. The brackets should align with the VESA holes on your TV.
Image: Rear view of the TV mounted on the cart, showing the two vertical support columns and how cables are managed along them. Note the small level tool placed on the bracket for alignment.
- Mount the TV to the Cart: Carefully lift the TV with the attached brackets and hook them onto the vertical support columns of the cart. Ensure the TV is securely seated. Some models may include safety screws to prevent accidental dislodgement.
- Adjust Height: The vertical columns allow for height adjustment. Loosen the locking mechanisms on the columns, adjust the TV to your desired viewing height, and then securely tighten the locks.
Image: Close-up of the cart's base, illustrating the wheels and their locking tabs. The design of the legs is also visible, providing stability.
- Cable Management: Utilize the integrated cable management features within the vertical columns to route and conceal power and HDMI cables. This helps maintain a clean and organized appearance.
Image: Detail of cables neatly routed through the hollow interior of the vertical support columns, emerging near the base for connection to a power outlet.
Operating Instructions
- Moving the Cart: To move the TV cart, ensure all four wheels are unlocked. Gently push or pull the cart to its desired location. Avoid sudden jerks or excessive force.
- Locking the Wheels: Once the cart is in position, engage the locking mechanism on each wheel to prevent unintended movement. This is crucial for stability and safety.
- Adjusting TV Angle: The TV mounting brackets may allow for slight tilt adjustments. Refer to the specific bracket instructions for details on how to adjust the viewing angle.
Maintenance
- Cleaning: Wipe down the cart with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Regular Inspection: Periodically check all screws, bolts, and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and safety.
- Wheel Care: Keep the wheels free of debris to ensure smooth rolling. Lubricate the wheel axles if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cart is unstable/wobbly | Loose fasteners; uneven floor; weight imbalance. | Ensure all screws are tightened. Move to a level surface. Redistribute TV weight if possible. |
| Wheels do not roll smoothly | Debris in wheels; wheels locked; lack of lubrication. | Clear debris from wheels. Unlock wheels. Apply a small amount of lubricant to axles. |
| TV not level | Mounting brackets unevenly installed. | Re-check bracket installation using a level. Adjust as needed. |
Specifications
- Brand: PERLESMITH
- Model: PSTVMC01
- Compatible TV Sizes: 32-85 Inch Flat Curved Screen TVs
- Weight Capacity: Up to 132 lbs (60 kg)
- Max VESA: 600x400mm
- Certifications: UL Certificated
- Features: Height Adjustable, Rolling, Floor TV Stand with Tray
Warranty & Support
For warranty information or technical support, please refer to the product packaging or visit the official PERLESMITH website. You may also contact their customer service directly for assistance with any issues not covered in this manual.
Manufacturer: PERLESMITH
