Introduction
This manual provides instructions for the PIQIUQIU Universal 2-in-1 Cup and Phone Holder. This accessory is designed to securely hold your beverages and mobile phone on various equipment such as strollers, bicycles, wheelchairs, walkers, and scooters. Constructed from safe and eco-friendly ABS material, it is odorless, strong, and durable, ensuring secure use. The anti-slip design and superior stability features ensure your items remain in place during movement.

Image: The PIQIUQIU Universal 2-in-1 Cup and Phone Holder, showcasing its two compartments for a cup and a phone.
Product Dimensions
Understanding the dimensions of your cup holder is important for proper placement and compatibility.

Image: A diagram illustrating the dimensions of the cup and phone holder. The total length is 18.5 cm (7.3 in), the cup holder diameter is 8.5 cm (3.3 in), and the height is 10 cm (3.9 in). The phone holder section is 9 cm (3.5 in) high.
Setup and Installation
The PIQIUQIU Cup and Phone Holder features an easy installation process that requires no tools. Follow these steps to attach it to your desired bar or handle:
- Identify Mounting Location: Choose a suitable bar or handle on your stroller, bicycle, wheelchair, or other equipment. Ensure the location allows for stable attachment and does not obstruct operation.
- Adjust Clamp Resistance: The clamp is designed with rubber pads for an anti-slip grip. Adjust the resistance of the clamp by turning the knob until it fits snugly around the bar.
- Secure Attachment: Tighten the knob to firmly secure the cup holder to the bar. The longer nut design provides superior stability, preventing excessive shaking and accidental drops.
- Rotate for Optimal Angle: The clip can be rotated 360 degrees. Adjust the angle of the cup holder to your preference for easy access to your drink and phone.

Image: The cup holder demonstrating its 360-degree rotation capability, allowing adjustment to any desired angle.

Image: Examples of the cup holder installed on a stroller, showing both rear and side hanging options. Insets demonstrate how the clamp adapts to both round and flat pipes.
Operating Instructions
Once installed, the PIQIUQIU Cup and Phone Holder is ready for use.
- Placing Beverages: Insert your cup or bottle into the main holder. The four small internal curves are designed to adapt to various cup sizes, ensuring a stable fit and preventing spills.
- Using the Phone Holder: Place your mobile phone into the dedicated side compartment. Ensure it is seated securely.
- Versatile Application: This holder is suitable for a wide range of applications, including but not limited to:
- Strollers
- Bicycles
- Scooters
- Walkers
- Wheelchairs
- Lawnmowers
- Carts
- Off-road vehicles
- Treadmills

Image: The cup and phone holder securely attached to a stroller handle, holding a green travel mug and a smartphone.

Image: The cup and phone holder attached to the handlebars of an exercise bike, holding a green travel mug and a smartphone.

Image: The cup and phone holder attached to the side frame of a wheelchair, holding a green travel mug and a smartphone, while a person reads a book.

Image: The cup and phone holder attached to the handlebars of an electric scooter, holding a green travel mug and a smartphone, as a person rides outdoors.
Maintenance
To ensure the longevity and proper function of your PIQIUQIU Cup and Phone Holder, follow these simple maintenance guidelines:
- Cleaning: Wipe the holder with a damp cloth and mild soap as needed. Avoid abrasive cleaners or solvents that could damage the ABS material.
- Inspection: Periodically check the clamp and tightening knob for any signs of wear or loosening. Ensure the rubber pads are intact to maintain anti-slip functionality.
- Storage: If not in use for an extended period, store the holder in a clean, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter any issues with your cup and phone holder, consider the following common solutions:
- Holder feels loose or unstable:
- Ensure the tightening knob is fully secured.
- Verify that the rubber pads on the clamp are correctly positioned and not damaged.
- Check if the mounting surface (bar/handle) is within the compatible size range for the clamp.
- Cup or phone does not fit securely:
- For cups, ensure the cup's diameter is compatible with the holder's flexible internal curves.
- For phones, check if the phone's dimensions (especially thickness) fit within the phone compartment.
- Difficulty rotating the holder:
- Ensure no debris is obstructing the rotation mechanism.
- Do not force rotation if it feels stiff; gently check for obstructions.
Specifications
| Feature | Detail |
|---|---|
| Brand | PIQIUQIU |
| Model Number | a |
| Material | Plastic (ABS) |
| Color | Black |
| Product Dimensions (L x W x H) | 18.5 x 14.3 x 18.5 cm |
| Number of Units | 1.0 unit |
| Hand Orientation | Ambidextrous |
| Automotive Fit Type | Universal Fit |
| Country of Origin | China |
| UPC | 768649277480 |
| ASIN | B0CGRJR7SY |
Warranty and Support
For warranty information and customer support, please refer to the manufacturer's official website or contact the retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.
If you have questions regarding the installation or operation of your PIQIUQIU Cup and Phone Holder, please reach out to the customer service department of your retailer.