1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your CONERY LED Tail Light Assembly. This product is designed as a direct replacement for the original tail lights on compatible BMW X3 G01 F97 models (2018-2021) and BMW iX3 models (2022).
The assembly integrates multiple lighting functions: LED rear fog lights, brake lights, reverse lights, and dynamic sequential turn signals. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage.
- Ensure the vehicle is parked on a level surface with the parking brake engaged.
- Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
- If you are unsure about any step of the installation process, consult a qualified automotive technician.
- Do not modify the product. Unauthorized modifications may void the warranty and compromise safety.
3. Package Contents
Verify that all components are present and undamaged before beginning installation:
- CONERY LED Tail Light Assembly (Left)
- CONERY LED Tail Light Assembly (Right)
- Installation Guide (this manual)
- (Note: Specific fasteners or tools are typically not included as this is a direct replacement.)
4. Specifications
| Brand | CONERY |
| Model Compatibility | BMW X3 G01 F97 (2018-2021), BMW iX3 (2022) |
| Light Functions | LED Rear Fog, Brake, Reverse, Dynamic Turn Signal |
| Waterproof Rating | IP67 |
| Installation Type | Plug and Play, Direct Replacement |
| Item Weight | 0.035 ounces (per unit, approximate) |
| Lens Color | Clear |
5. Installation Guide
The CONERY LED Tail Light Assembly is designed for direct replacement, requiring no modification or drilling. However, careful attention to detail is necessary.
5.1 Pre-Installation Check
Before proceeding, visually inspect both tail light assemblies for any signs of damage. Confirm that the electrical connectors on the new lights match those on your vehicle's existing wiring harness.
Image 1: Rear view of the tail light showing the electrical connector. It is crucial to confirm the plug type before installation.
Important: Please confirm the plug of the headlight before purchasing/installing. If it cannot be installed due to different plugs, the manufacturer is not responsible.
5.2 Installation Steps (General)
- Access Existing Tail Lights: Depending on your BMW X3/iX3 model year, you may need to remove interior trim panels in the trunk area to access the mounting bolts and electrical connectors of the original tail lights. Refer to your vehicle's owner's manual for specific instructions on removing the original tail light assemblies.
- Disconnect Wiring: Carefully disconnect the electrical connector from the back of the original tail light.
- Remove Original Tail Light: Unscrew any mounting bolts or nuts securing the original tail light assembly. Gently pull the assembly away from the vehicle body.
- Install New Tail Light: Position the CONERY LED Tail Light Assembly into the opening. Ensure it sits flush with the vehicle body.
- Secure New Tail Light: Reinstall the mounting bolts or nuts to secure the new tail light assembly. Do not overtighten.
- Connect Wiring: Connect the electrical connector from the vehicle's wiring harness to the new tail light assembly. Ensure a secure connection.
- Test Functionality: Before reassembling any trim, reconnect the vehicle's battery and test all light functions (running lights, brake lights, reverse lights, turn signals) to ensure they operate correctly.
- Reassemble Trim: Once confirmed, reassemble any interior trim panels removed during the process.
Image 2: Various views of the CONERY LED Tail Light Assembly installed on a BMW X3, demonstrating fitment and appearance.
6. Operating Instructions
The CONERY LED Tail Light Assembly integrates seamlessly with your vehicle's existing lighting controls. The various functions will activate automatically based on your vehicle's operation.
6.1 Light Functions
- Running Lights: Activate when your vehicle's headlights or parking lights are on.
- Brake Lights: Illuminate brightly when the brake pedal is pressed.
- Reverse Lights: Activate when the vehicle is shifted into reverse gear.
- Rear Fog Lights: Activate when your vehicle's rear fog light function is engaged (if equipped).
- Dynamic Turn Signals: The amber LEDs will illuminate in a sequential, sweeping motion in the direction of the turn, providing enhanced visibility and a modern aesthetic.
Image 3: Illustration of the different lighting functions: Running Light, Fog Light, Turn Signal, and Brake Light.
Image 4: Detailed view of the illuminated CONERY LED Tail Light Assembly on a BMW X3.
7. Maintenance
The CONERY LED Tail Light Assembly is designed for durability and minimal maintenance.
- Cleaning: Clean the lens with a soft cloth and mild automotive cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
- Waterproof Design: The tail lights are rated IP67 waterproof and dustproof, providing protection against environmental elements. However, avoid high-pressure washing directly at close range to the seals.
- Regular Inspection: Periodically check the tail lights for any signs of damage, loose connections, or condensation. Address any issues promptly.
8. Troubleshooting
If you encounter issues with your CONERY LED Tail Light Assembly, consider the following:
- Lights Not Functioning:
- Check the electrical connection at the back of the tail light to ensure it is securely plugged in.
- Verify that the vehicle's fuses related to tail lights are intact and not blown.
- Ensure the vehicle's battery is properly connected and charged.
- Incorrect Functionality (e.g., Turn Signal not dynamic):
- Recheck all connections.
- Ensure the correct tail light assembly is installed on the correct side of the vehicle (left/right).
- Condensation Inside Lens:
- Minor condensation can occur due to temperature changes and usually dissipates. If excessive or persistent, check for proper sealing and installation.
If troubleshooting steps do not resolve the issue, contact customer support or a qualified technician.
9. Warranty and Support
For warranty information and customer support, please refer to the specific warranty policy provided at the time of purchase or contact the CONERY manufacturer directly. Keep your proof of purchase for warranty claims.
Manufacturer: qing qing shop q
Note: Specific warranty terms may vary by region and retailer.